low carbon steel tube
"
Double Wall PVF Coated Bundy Low Carbon Steel Tube
Bundy Tube Bundy Pipe PVF Coated Bundy Tubes Copper brazed double wall steel tube is made of steel strips which is copper plated on both sides.It has widely applied for automobiles,refrigerators and the other hydraulic system industries. Dimension and specification O.D. mm Thickness mm Weight g/m Assurance pressure kg/cm3 4.76 0.7 70.28 350 6.00 0.7 91.76 350 6.35 0.7 97.75 350 7.00 0.7 108.75 350 7.14 0.7 111.17 350 8.00 0.7 126.31 350 Tolerance O.D. and W.T. +/-0.08mm
SAE J356 Welded Flash Controlled Low Carbon Steel Tubing 15.88mm OD
15.88 mm OD X 1.24 mm Type -A J356 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading This SAE Standard covers normalized electric-resistance welded flash-controlled single-wall low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, beading, and brazing. Material produced to this specification is not intended to be used for
15mm Wall Thickness J524 Seamless Low Carbon Steel Tubing Annealed for Bending / Flaring
J524 Seamless Low Carbon Steel Tubing Annealed for Bending and Flaring Size range: O.D.:6-88.9mm W.T.:1-15mm L: According to customer Order Table 1- TUBING OUTSIDE DIAMATER TOLERANCE Nominal Tubing OD mm Tolerance mm Up to 25.4 0.10 Over 25.4 to 38.1 inclusive 0.15 Over 38.1 to 50.8 inclusive 0.20 Over 50.8 to 88.9 inclusive 0.25 WT tolerance shall be not more than 10% Table 2- CHEMICAL REQUIREMENTS Element % Carbon 0.18 max Manganese 0.30 to 0.60 Phosphpris 0.040 max Sulfur
SAE J524 Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring
SAE J524 Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring 1. SCOPE This SAE Standard covers cold drawn and annealed seamless low-carbon steel pressure tu bingintended for use ashydraulic lines and in other applications requiring tubing of a quality suitable for flaring and bending. 2. MANUFACTURE The tubing shall be cold drawn to size and after forming shall be annealed in such a manner as to produce a finishedproduct which will meet all requirements of this
ASME SA179 Seamless Carbon Steel Tubing Cold-Drawn Low-Carbon Steel Tube For Heat-Exchanger
ASME SA179 Seamless Carbon Steel Tubing: Cold-Drawn Low-Carbon Steel Tube For Heat-Exchanger ASME SA179 seamless carbon steel tubing is engineered for use in heat exchangers and condensers. Renowned for its high durability and ability to withstand extreme conditions, it is a preferred material in various industrial applications. This article delves into its material properties, specifications, key features, chemical composition, mechanical properties, steel grades, applicatio
Bundy Tube Double-Wall Low Carbon Steel Tube Copper Plated for Automotive Use
Bundy Tube Double-Wall Copper-Plated Low-Carbon Steel Tube for Automotive Use Material Overview Bundy tube is a double-wall low-carbon steel tube manufactured by rolling a steel strip into a 720 overlap and copper-brazing the seam. This produces a concentric double-wall tube with a continuous brazed bond between the two walls. For automotive brake and fuel lines, this design offers: The mechanical strength and rigidity of steel The corrosion protection and brazeability of
SAE J526 Low-Carbon Steel Galvanized Precision Steel Tube Bundy Tube for Braking Systems
SAE J526 Welded Low-Carbon Steel Tubing (Coiled) for Brake & Hydraulic Lines Material SAE J526 tubing is an electric-resistance welded (ERW), single-wall low-carbon steel tube supplied in coils (or straight lengths) for automotive fluid conductor applications where controlled bending, flaring, beading, forming, and brazing are required.Important design note: SAE J526 material is not intended for single-flare applications due to a potential leak path associated with the
SAE J526 ERW Welded Steel Pipe / Low Carbon Steel Tubing For Automotive Fuel
SAE J526 Welded Automotive Fuel Steel tube Application:covers welded single-wall low-carbon steel tubing intended for generalautomotive, refrigeration, hydraulic, and other similar applications requiring tubing of a quality suitable forbending, flaring, beading, forming, and brazing. size:length--2~12m WT--2~4.5mm OD--16~50mm Manufacture:The tubing shall be made from a single strip of steel shaped into a tubular form, the edges ofwhich are joined and sealed by a suitable
SAE J525 ERW/DOM Welded Low-Carbon Steel Tube Annealed for Bending and Flaring in Automotive Industry
SAE J525 ERW / DOM Welded Steel Tube Low Carbon Annealed For Automotive Industry SAE J525 ERW/DOM Welded Low-Carbon Annealed Steel Tube for Automotive Hydraulic Lines SAE J525 ERW/DOM welded steel tube is a normalized, cold-drawn, single-wall low-carbon steel pressure tube designed for automotive fluid-line parts requiring bending, flaring, forming, and brazing. It is a practical choice when the drawing requires tight OD/ID control, good concentricity, a smooth surface, and
