thick wall steel tube
"
Carbon Seamless Triangle Pto Shaft Tubing DIN 2391 For Algricultural Machineries
Products Description TORICH DIN 2391 Carbon Seamless Triangle Lemon Tube PTO Tube For Algricultural Machineries Standard DIN 2391, GB/T3639, EN10305, DIN3094 Material 10#~45#,16Mn, ST35~ST52 Carbon Steel Size OD: 30mm~200mm WT: 3mm~20mm Length: according to customer requirement Technique Cold Draw/Cold Rolled Hardness HB170-217 Tolerance It can be controled within OD/Thickness +/-0.1mm Application The POWER-TAKE-OFF system in agriculture machinery Harvester, Tractors Test
SA192 Cold Drawn Seamless Profile Finned Tube for Boiler Heat Exchanger
SA192 Profile Seamless Cold Drawn Shaped Carbon Steel Two Fins Pipe Round Boiler Finned Tube Profile Steel Tube Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Carbon Steel and Alloy Steel grade, upon customers request. Profile Steel Tube Size: OD:5-420 mm, W.T.:0.5-50 mm, Length: up to 12 m, or according to customer's requirement. ( Diameter and wall thickness could be at customer's request.) Standard: BS, JIS, GB, DIN, ASTM, API,
Heat Exchanger Boiler GB13296 Stainless Steel Welded Pipe
GB13296 Seamless Stainless Steel Heat Exchanger Boiler Pipe Standard: GB13296 Seamless Stainless Steel Tubes For Boiler And Heat Exchanger Usage: This standard is applicable to Austenite and Ferritic seamless stainless steel tubes for boiler and heat exchanger. Production process: Seamless tube can be produced by Hot Treatment, Cold Drawing or Cold Rolling. Note: Special steel grade is also available, according to customer request. Permissible deviation of outside diameter
super duplex stainless coiled tubing
super duplex stainless coiled tubing Sizw Range : outer diameter 3-25.4mm Wall Thickness: 0.3-2.0mm Inner Bore Size of Coil : 500-1500mm General Delivery Length: 200-1000mm Example of physical Properties of steel pipe under Bright Annealing Condition: Elongation Percentage: >55% Surface Hardness: 550N/MM2 Yield Strength :>195N/NM2 Coil tubes Specification Table O.D mm W.T mm 3.0-4.0 4.01-6.00 6.01-8.00 8.01-10.0 10.01-12.7 12.71-19.05 19.05-25.4 0.30-0.40 0.41-0.50
TORICH UNS N04400 ASTM B165 U Bend Tube
TORICH UNS N04400 ASTM B165 Nickel Copper U Bending Enhanced Evaparation Tube This specification covers nickel-copper alloy UNS N04400 in the form of cold-worked seamless pipe and tube. The material shall conform to the composition limits specified. Tension test, hydrostatic test, nondestructive electric test, and rounding method shall be done in accordance to the specified requirements. Chemical Requirements Element Composition Limit % Product(check)Analysis Variations
SAE 1020 Shock Absorber 10mm Carbon Steel Seamless Tubing
SAE 1020 carbon steel for automobile outer tube Cabon steel grade SAE 1020 is a low hardness and low tensile strength alloy. The Brinell hardness of the SAE 1020 Steel Tube ranges between 119 235, whereas its tensile strength is between 410 MPa to 790 MPa. Though it lacks some of the characteristics of a conventional carbon steel grade, the SAE 1020 Steel Tube exhibits other important characteristics such as high strength, high machinability, high ductility as well as good
High Frequency Welded Aluminum 2mm Spiral Finned Tube
High Frequency Welded Spiral Finned Aluminum Fins Tube Finube Fin Caoutchouc Advantages of high frequency welding spiral finned tube 1. The installation is simple and economical. The large length of high-frequency welded spiral finned tube can reach more than 20 meters, and there is no connection point, which makes the installation more economical and fast, and reduces the probability of water leakage at the connection. 2. The maintenance is simple. After the installation of
GOST 9941-81 Alloy Steel Pipe Seamless Warm Deformed Tubes Corrosion Resistant
GOST 9941-81 Alloy Steel Pipe: Seamless Warm-Deformed Tubes for Corrosion Resistant Applications Introduction GOST 9941-81 is a Russian industry standard that specifies the requirements for alloy steel seamless warm-deformed tubes used in corrosion-resistant applications. This standard ensures the quality and performance of the pipes, making them suitable for use in various industrial sectors. In this article, we will delve into the material, key features, chemical compositio
ASTM A335 P91 Alloy Steel Seamless Pipe Chrome Moly Pipe For High Temperature Service
ASTM A335 P91 P1 P2 P5 P11 Alloy Steel Seamless Pipe: Chrome Moly Pipe for High-Temperature Service Material and Specification ASTM A335 is a specification for seamless ferritic alloy-steel pipe intended for high-temperature service. The grades covered under this specification include P1, P2, P5, P11, and P91, each designed to withstand elevated temperatures and pressures. These pipes are commonly used in power plants, petrochemical plants, and other high-temperature
