low carbon steel tube
"
EN10219-2 Non - alloy / Fine Grain Steels Cold Formed Welded Structural Hollow Sections
EN10219-1 EN10219-2 Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels Part 1: Technical delivery condition Part 2: Tolerances, Dimensions and Sectional Properties Structural hollow section manufacturing process: Structural hollow sections are manufactured by electric welding or submerged arc welding without subsequent heat treatment. Hollow sections manufactured by a continuous process shall not incude the welds used to join the lengths of strip
Low Density Alloy Steel Pipe 10.2-4.5 Mm WT , Titanium Seamless Tube For Petrochemical
Products Description TORICH GB/T 3624 Low Density Titanium Alloy Steel Tube For Petrochemical/Automobile Key Word Titanium Alloy Steel Tube Material TA1,TA2,TA3,TA8,TA8-1,TA9,TA9-1,TA10 Size OD: 4-114mm; WT: 0.2-4.5; Length: 1-12m Application Aerospace, petrochemical, shipbuilding, automobile, medicine etc. Mechanical Porperties Alloy Grade Tensile strength /Mpa specified non-proportional extension strength /Mpa percentage elongation after fracture % TA1 240 140-310 24 TA2
42 Inch 60 X 60 Square Structural Steel Pipe Mild Steel ERW Pipe Tube Grade S275JR
42 inch 60x60 Square Mild Steel ERW Pipe Tube Grade S275JR Basic detail information 1. Size: O.D.:5-420mm W.T.:0.5-50mm L:max12000mm 2. Certification: ISO9001, ISO14001,TS16949 3. Applications: for construction of bridges, and buildings, and for general structural purposes Package: 1) Bundle 2) In Bulk 3) Bags 4) As Clients' Requirements Fully Stocked GB/T 3087-2008 Seamless Steel Tubes For Low And Medium Pressure What is your Payment Term? 1. T/T: 30% deposit in advance, the
Seamless Steel Tube Precision Seamless Steel Pipe Precision Steel Tube Manufacturers
Seamless Steel Tube Precision Seamless Steel Pipe Precision Steel Tube Manufacturers TORICH is a professional steel tubes supplier from China with over 23 years manufacturing and exporting experience. Our main products are seamless precision pipe,carbon steel seamless precision pipe,alloy steel seamless precision pipe, stainless steel seamless precision pipe. The material we usually use for producing Seamless Steel Tube Precision Seamless Steel Pipe Precision Steel Tube
YB/T 5035 45# Precision Alloy Seamless Steel Pipe For Automobile Half Shaft Sleeve
YB/T 5035 45# Precision Alloy Seamless Steel Pipe For Automobile Half Shaft Sleeve Material and Specification The YB/T 5035 45# precision alloy seamless steel pipe is specifically designed for use in the manufacturing of automobile half shaft sleeves. This high-quality steel pipe is widely used in the automotive industry due to its exceptional performance and reliability. The material composition and mechanical properties of this steel pipe make it an ideal choice for this
B163 Nickel Alloy Steel Pipe Incoloy 800HT High Temperature Alloy Steel Tubing
B163 Alloy Steel Pipe Incoloy800HT Incoloy 800HT Chemical composition: Ni :30.0-35.0 Cr:19.0-23.0 Fe:39.5 C:0.06-0.1 Mn:1.5 Si:1.0 S:0.015 Cu:0.75 Al:0.15-0.60 Ti:0.15-0.60 Metallographic structure: face-centered cubic structure,The extreme low carbon element content ,improve the rate of Ti:C ,so that it also improve the structural stability, intergranular corrosion resistance.950 low temperature annealing assure the crystal structure. Mechanical properties: Mechanical
Stainless Welded Steel Tube Ferritic / Austenitic For General Corrosion Service
ASTM A790 Ferritic or Austenitic Stainless Steel Welded Tubes or Seamless tubes for general corrosion service Size range: O.D.: 4.0-230mm W.T.:1-30mm L: according to customer requirement Material and Manufacture: S31200, S31260, S31500, S31803, S32003, S32101, S32202,S32205, S32304, S32506, S32520... Tubes are made from Flat-rolled steel by automatic welding process. Subsequent to welding and prior to final heat treatment, the tubes are cold drawn or cold rolled Duplex
Stainless Steel DOM Round Tube for Hydraulic Cylinder 30-630mm
Stainless Steel DOM Round Tube for Hydraulic Cylinder Material The product is a DOM (DrawnOverMandrel) stainless steel round tubing, colddrawn over a mandrel to ensure superior dimensional precision, smooth inner and outer surfaces, and enhanced weld strength. DOM refers to the manufacturing process, not the alloy. Common stainless grades for corrosionresistant hydraulic applications include 304L, 316L, and 174PH for higher strength needs. Specifications Manufacturing
Customized Surface Heavy Wall Steel Tubing Seamless Cold Drawn Type OD 5-120mm
Customized Surface Heavy Wall Steel Tubing Seamless Cold Drawn Type OD 5-120mm Customized Surface Heavy Wall Steel Tubing Seamless Cold Drawn Type OD 5-120mm Material: Carbon and Alloy Steel, ferritic steel Grade 1A, Grade3, Grade 4, Grade 6A, Grade 7A Manufacture: The pipes are made by seamless and welding process with the addition of no filler metal in the welding operation. Grade 4 is manufactured by seamless process Heat treatment: All seamless and welded pipes, other
