cold formed steel tube
"
Electric Resistance DOM Steel Tube JIS G3445 STKM 15A For Auto Competent
Product Name:Carbon steel tubes for machine structural purposes Appllication: Machine Auto competent Furniture Bicycle Mechanical parts Mechanical Elements machine elements 1.Grade STKM 11A STKM 12 (ABC) STKM 13(ABC) STKM 14(ABC) STKM 15(AC) etc Standard JIS G3445 2.OD:4-60mm,Wall thickness:0.5-7mm 3.Characteristic:The tubes are high precision in tolerance 4.Kindly advise heat treatment requirement if any. HR CW SR A N HF HR:hot rolled CW:cold worked SR:stress relieved A
Hot Finished Heavy Wall Steel Tubing DIN EN10210-1 Construction And Decoration
DIN EN 10210-1 Hot finished Heavy Wall Steel Tubing of non-alloy and fine grain steels DIN EN 10210-1 Hot finished structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions Part 2: Tolerances, dimensions and sectional properties Cold forming: Process is done at ambient temperature Structrual hollow section manufacturing process: Structural hollow sections are manufactured by seamless or by welding. Welded sections manufactured by
ASME SB163 UNS N08825 Nickel Alloy Seamless Steel Tube For Chemical Industry
ASME SB163 UNS N08825 Nickel Alloy Seamless Steel Tube for chemical industry Type: Nickel alloy steel pipes Application: Chemical process industry, acid production, pickling equipment, pollution control equipment. Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: C Si Mn P S Ni Cr Fe Mo Cu Al Ti Min 38.0 19.5 22.0 2.5 1.5 0.6 Max 0.05 0.5 1.0 0.03 46.0 23.5 3.5 3.0 0.2 1.2 Physical
API Carbon 0.3-3.5mm Thickness Precision Steel Tube
EN 10305-4 E235 (E255 E355 )+N Carbon Steel Pipe For Hydraulic And Pneumatic Systems The surface of phosphating precision seamless steel pipe is especially suitable for painting or spray coating. The paint surface has strong adhesion, excellent effect and beautiful ,anti rust effect Greatly strengthened. Name Scope mm DIN seriesmm OD 04-30 0.08 OD 31-40 0.15 OD 41-50 0.20 OD 51-60 0.25 Wall 0.5-7 10% Production Routing: Quality carbon steel from bao steel etc big mill,
En 10305 4.0X0.7 Small Diameter CDW Precision Steel Tube Plain End For Fuel Injection Nozzle
En 10305 4.0X0.7 Small Diameter CDW Precision Steel Tube Plain End For Fuel Injection Nozzle Quick detail : Origin China Brand name Torich Certificate ISO9001 TS16949 Material Carbon steel 1020,1010,1045,4130,4140,38CrMoAl,20Cr etc Product name EN 10305 Small Cdw Tube Cold Draw Seamless Welded Diameter Steel Tube For Precision Applications Capacity Cold drawing,Cold rolled Basic introduction Size range of CDW Tube : 3-400mm Production method: Cold drawing,Cold rolled Steel
Omega Tube SAE1010 Precision Cold Drawn Seamless Steel Tube for Boiler Applications
Omega Tube SAE 1010 Precision Cold Drawn Special Shaped Seamless Tube For Boilers Material This product is a precision cold-drawn seamless steel tube manufactured in an (omega) / special-shaped profile for boiler and heat-transfer service.It is commonly produced from SAE 1010 low-carbon steel , a grade known for excellent cold-formability, stable weldability, and consistent performance after cold working and stress relief/annealing , making it suitable for precision-profile
EN 10208 Standard Welded Steel Tube / Welded Steel Pipe For Pipelines ISO
EN 10208 Standard Steel Pipe for pipelines for combustible fluids The process by which a flat product is formed into a pipe without heating of the plate or strip.Cold working operation with a permanent strain greater than the maximum strain of 1.5% which differentiates it from sizing operations specified in table. For seamless pipe, the entire pipe; for welded pipes, the entire pipe excluding weld(S) and heat affected zone (HAZ) Normalizing forming Forming process in which
ASTM A500 Cold Formed Tube Welded Carbon Steel Structural Tubing For Structural Use
ASTM A500 Cold Formed Tube Welded Carbon Steel Structural Tubing For Structural Use ASTM A500 is a standard specification for cold-formed welded and seamless carbon steel structural tubing in rounds and shapes. This specification is widely used in construction and structural applications due to its versatility, strength, and cost-effectiveness. The tubing is designed for structural applications where strength, weldability, and formability are critical. Material ASTM A500
TORICH GB/T3091 Q195 Welded Steel Tube For Low Pressure Liquid Delivery
TORICH GB/T3091 Q195 Welded Steel Pipes For Low Pressure Liquid Delivery sizes: O.D : 5mm-420mm W.T : 0.5mm-50mm Length:3000mm-12000mm Steel material: Q195,Q215,Q215B,Q235A,Q235B,Q235,Q345,Q345B Application: Carbon steel pipe use for construction ,building filed , low pressure liquid, water, gas, oil, line pipe Surface Treatment: Galvanized,Oiled,Black Painted (varnish coating),corrosion resistant coating, Anti corrosion coating Technique: Electronic Resistance Welded (ERW )
