alloy steel seamless tube
"
Carbon Steel Seamless Tube Cold Drawn Steel Tube DIN 2391 For Automobile
Seamless Steel Tube Carbon Steel Seamless Pipes Cold Drawn Steel Tube DIN 2391 For Automobile Table of Contents Material Specification Chemical Composition Mechanical Properties Steel Grade Application Material The seamless steel tubes used for carbon steel seamless pipes, specifically designed for cold drawn applications as per DIN 2391, are fabricated from high-quality carbon steel. This material ensures excellent durability, strength, and corrosion resistance, making it
JIS G4105 SCM440 Alloy Steel Seamless Pipes for High Temperature Applications
JIS G4105 SCM440 Alloy Steel Seameless Pipes: High-Temperature Chromium-Molybdenum Tubes SCM440 alloy steel seamless pipes, specified under JIS G4105, are chromium-molybdenum medium-carbon structural steel tubes designed for high-temperature service. These pipes combine excellent strength, toughness, and fatigue resistance after quenching and tempering, making them equivalent to international grades such as AISI 4140 and EN 42CrMo4. Material SCM440 (JIS G4105) is a medium
Cold Drawn / Rolled Alloy Steel Pipe Seamless For Gear Wheel Axle Shaft
Seamless Cold Drawn Or Cold Rolled Alloy Steel Tubing 41Cr4 40Cr DIN1.7035 For Gear Wheel , Axle , Shaft Alloy Steel Tubes 41Cr4 40Cr DIN1.7035 Seamless Steel Tubes with alloy steel grade 41Cr440CrDIN1.7035 International equivalent: JIS: SCr440 ASTM: 5140 ISO: 41Cr4 41Cr4DIN1.7035: C:0.42 Si:0.25 Mn:0.70 Cr: 1.05 40Cr: C:0.37-0.44 Si:0.17-0.37 Mn:0.50-0.80 Cr:0.80-1.10 Seamless steel tubes with these steel grade could achieve good mechanical properites with quenching and
Round Seamless Titanium Pipe Alloy Steel Pipe For Condenser / Stainless Steel Tubing For Heater Exchanger
Round Seamless Titanium Pipe Alloy Steel Pipe For Condenser / Stainless Steel Tubing For Heater Exchanger Standard: GB/T3624, GB/T3625, ASTM B338/ASME SB338, ASTM B861/ASME SB861, DIN17861 Size range: OD: 10-80mm WT: 0.5-4.5mm Length: 15m max Material: TA1, TA2, TA3, TA9, TA10 Usage: Condenser and Heater-Exchangers Chemical Composition% Grade N max C max H max Fe max O max Residual Al V Pd Mo Cr Si max S max Mn max Cu Oth ers Ni Ti Each max Total max TA1 0.03 0.08 0.015 0.20
Bicycle Frame ASTM B861 ASME SB861 Alloy Steel Pipe
TORICH ASTM B861 ASME SB861 Seamless Titanium Tubes Pipes for Bicycle Frame Material : Titanimu Alloy Steel, Characteristic of the material:High strength ,low density,good mechanical property ,good tenacity.good corrosion resistance . titanium alloy steel seamless pipe It can be made by seamless and welded.and widely apply in power generation,Aerospace,oil and gas ,chemical processing. Available size list: OD 6-127mm WT: 0.5-10mm Cold drawn Seamless pipes with Ti and Ti alloy
Inconel 625 Seamless Tubing Inconel Alloy 625 Round Nickel Alloy Steel Tube
Inconel 625 Seamless Tubing Inconel Alloy 625 Round Nickel Alloy Steel Tube Product Description Inconel 625 is an alloy grade with a density of 8.4 g/cm3 and a melting point of 1290-1350C. It has excellent resistance to inorganic acid corrosion and has excellent corrosion resistance to various corrosive media in oxidation and reduction environments. Alloy 625 shows excellent corrosion resistance in many media. It has excellent resistance to pitting, crevice corrosion,
Cold Finished Seamless Alloy Steel Tube Astm B668 Uns N08028 Length 2 - 12m
Products Description: ASTM B668 UNS N08028 Cold Finished Seamless Alloy Steel Pipe and Tube Steel Grade/Steel Material: Element C max Si max Mn max P max S max Cr Ni Mo Cu Iron Composition,% 0.030 1.0 2.50 0.030 0.030 26.0-28.1 30.0-34.0 3.0-4.0 0.6-1.4 remainder Mechanical Properties: Tensile Strength, min, ksi(MPa) Yield Strength, min, ksi(MPa) Elongation, min, % 73(500) 31(214) 40 Delivery Condition: Solution-Annealed, or Bright Annealed Size Range: OD: 5-203.2mm WT: 0.5
Boiler Structural Alloy Steel Pipe Oiled Surface With Hot / Cold Finished
Details of Structural Alloy Steel Pipe: Product Name::Alloy Steel TubeGrade::GB/T3077 , 38CrMoAl , ISO41CrAlMo74Material:Alloy SteelProduction:Hot Finished And Cold Finished Alloy Steel Tube Grade GB/T3077 38CrMoAl ISO 41CrAlMo74 Structural steel tubes standardGB/T3077: 38CrMoAlISO: 41CrAlMo74GOST: 38X2MOA(38XMOA)DIN: 41CrAlMo7 34CrAlMo5BS: 905M39 905M31NF: 40CAD6.12 30CAD6.12 Chemical composition of Structural Alloy Steel Pipe:C :0.35~0.42Si:0.20~0.45 Mn:0.30~0.60 S :0.035
T1 T1a T1b Seamless Alloy Steel Pipe ASTM A209 For Boiler And Superheater
ASTM A209 T1 T1a T1b Seamless Alloy Steel Tubes For Boiler and Superheater Size range: O.D.: 6-420mm W.T.:1-50mm L: according to customer requirement Steel Grade and Chemical Compositions: Element T1 T1a T1b Carbon 0.10-0.20 0.15-0.25 0.14max Manganese 0.30-0.80 0.30-0.80 0.30-0.80 Phosphorus 0.025 0.025 0.025 Sulfur max 0.025 0.025 0.025 Silicon 0.10-0.50 0.10-0.50 0.10-0.50 Molybdenum 0.44-0.65 0.44-0.65 0.44-0.65 Mechanical Properties: Element T1 T1a T1b Tensile strength
