thick wall steel pipe
"
High Precision DIN 2391 24mm Cold Drawn Seamless Tube
24mm high precision seamless steel small tube Torich the steel tubes maker. Key words :Hydraulic cyliner tubes,DIN2391 steel tubes ST37 ST35 St37.4 St52 E235 E255 E355 etc material is avaliable. Delivery condition:BK(+C),BKS(+SR),BKW(+LC),GBK(+A),NBK(+N). Spec: OD4-114.3mm WT0.5-15mm Pls feel free contact if any special requests on material and sizes. Production method:Quality carbon steel--Cold drawing--Bright heat treatment without oxidization (NBK status)--nondestructive
ASME B16.9 10" Butt Weld Concentric Reducer Seamless DN6 DN100
ASME B16.9 Concentric Reducer Standard ASME B16.9 wraps in several parameters that act as a guideline for the manufacturer of wrought factory-made buttwelding fittings such as elbows, tees, reducers including the Carbon Steel Concentric Reducer etc. The fittings need to conform to the values of the following parameters i.e. overall concentric pipe reducer dimensions, ratings, testing, tolerances, and markings. Depending on the buyer, these reducers are made available between
Overlapped L Type Fin Tube Carbon LL Type Finned Tube with Helically Wound Fins and High Thermal Conductivity for Heat Exchangers
Overlapped L Type Fin Tube Carbon LL Type Finned Tube for Heat Exchanger Product Overview Overlapped L type fin tube, also called LL type finned tube or LL-foot fin tube, is a tension-wound finned tube where L-shaped fins are helically wrapped around a carbon steel base tube and each fin foot overlaps the previous one. This creates a double L foot that completely jackets the outer surface of the tube. For carbon LL type fin tubes, the base tube is typically seamless low- or
Corrosion Resistant Crimped Fin Tube with Enhanced Air-Side Performance and Reliable Mechanical Bond for Air Coolers
Crimped Fin Tube (Helically Tension Wound, Cold-Formed Finned Tube) for Air Coolers Material A Crimped Fin Tube (also called a Spiral Tension Wound / Cold-Formed Finned Tube ) is a heat-transfer tube where a metal fin strip is helically wound under controlled tension onto a base tube . The fin strip is pre-formed to widen the contact foot, then mechanically locked to the tube surface (with end fixing such as tack/tag welding or spot welding depending on design). Common
Bearing GR15 SKF 100CR6 Seamless Mechanical Tubing
HIGH HARDNESS BEARING SEAMLESS GR15 SKF 100CR6 STEEL PIPE AND TUBE Product Name HIGH HARDNESS BEARING SEAMLESS GR15 SKF 100CR6 STEEL PIPE AND TUBE Material 10#,20#,45#,Q345,A106-B,20Cr,15CrMo,St37,St42,ASTM 4140 etc. Standard JIS,GB,ASTM,DIN Technique Cold Rolled OD 10~335mm,1/2"~12" Wall Thickness 2~25mm,SCH10~XXS Length 5.8m~12m/customized design Surface Treatment black painting, varnish, oil, galvanized, anti corrosion coatings Packaging 1. Bundle packing. 2. Bevelled end
Torich ASTM A556 Gr A2 B2 C2 Seamless Boiler Tubes
Torich ASTM A556 Seamless Cold Drawn Seamless Boiler Pipe This standard is issued under the fixed designation A556/A556Mthe number immediately following the designation indicate the year of original adoption or,in the case of revision,the year of last revision. A number in parentheses indicates the year of last reapproval.A superscript epsilon indicates an editorial change since the last revision or reapproval. Reference documents:A450/A450M Specification for General
Fin Cooler L Type Wound Finned 40mm Wt Heat Exchanger Tubes
Tube Fin Type Tube-Fin Cooler L-Type Wound Finned Tube L-type wound finned tube: aluminum fin or copper fin is folded into an L shape and continuously spirally wound on the outer surface of the base tube under the action of tension. High operating temperature: 150 . Ll type wound finned tube: on the basis of L type, the fin root completely covers the outer surface of the base tube; To some extent, this fin type ensures better corrosion resistance. High operating temperature:
6mm-860mm OD Stainless Duplex Sheet Pickled Surface For Maximum Durability
stainless duplex sheet 1. Product name: Duplex Stainless Steel Pipes,ASTM A789 Seamless&Welded Ferritic/Austenitic Stainless Steel Pipes 2. Diameter:6mm~860mm 3. Wall Thickness: 0.5mm~80mm 4. Length: Any length between 1~15 meters, will be customized 5. Standard: ASME SA213, A312, A269, A688, A789, A790, EN 10216-5 etc. 6. Surface: Pickled surface, or bright annealed surface, will be customized 7. Other Materials: 304, 304L, 316, 316L, 317, 317L, 321, 321H, 310, s31803,
2205 stainless duplex sheet
2205 stainless duplex sheet 1. Product name: Duplex Stainless Steel Pipes,ASTM A789 Seamless&Welded Ferritic/Austenitic Stainless Steel Pipes 2. Diameter:6mm~860mm 3. Wall Thickness: 0.5mm~80mm 4. Length: Any length between 1~15 meters, will be customized 5. Standard: ASME SA213, A312, A269, A688, A789, A790, EN 10216-5 etc. 6. Surface: Pickled surface, or bright annealed surface, will be customized 7. Other Materials: 304, 304L, 316, 316L, 317, 317L, 321, 321H, 310, s31803,
