seamless steel pipe
"
Pickling Surface Welded Alloy Steel Pipe ASTM A250 Electric Resistance
GB/T12771 Polished Liquid Delivery Welded Stainless Steel Pipes 12Cr18Ni9 Description alloy steel pipe, alloy seamless steel pipe, alloy welded pipe, seamless alloy steel pipe,alloy pipe,alloy steel tube Standard ASTM A335,ASTM A213,JIS G3458,JIS A3462,DIN17175,GB5310,GB9948 Material ASTM A335 P2, ASTM A335 P12, ASTM A335 P11, ASTM A335 P22, ASTM A335 P5, ASTM A335 P9, ASTM A213 T2, ASTMA213T11, ASTMA213T5,ASTMA213T9,ASTMA21T22,1Cr5Mo,12Cr2Mo, 12Cr1MoV,15CrMo,etc. Outside
Flat Elliptical Oval Welded Special Steel Pipe SAE J526 1010 High Precision
Flat Elliptical Oval Welded Special Steel Pipe SAE J526 1010 High Precision Product Description: SAE J526 DOM Carbon Seamless Steeel Tube 16X1 20X2 DIN2391 ST35 CDS DOM Steel Tube DIN2393 ST35 CDW DOM Steel Tube DOM Steel Pipe Steel Grade/Steel Material: E155,E195,E235,E275,E355 Delivery Condition: BK, BKW, BKS, GBK, NBK Size Range: OD: 4.0-420mm WT:0.5-50mm Length: max 12000mm Our regularproduction size 60x50 42x3.2mm Characteristic: Good concentricity Good OD and ID
Sa179 Sa192 Seamless Special Steel Pipe Carbon Boilers Internal Thread Steel Pipe
SA192 Seamless Carbon Boilers Tubes Thread Steel Pipe Applications: Seamless Carbon Boiler Tubes Size range: O.D.:5-420mm W.T.:0.5-50mm L: according to customer's requirement (Max12m) Chemical Compositions Mechanical Properties C 0.06-0.18 Tensil Streghth min ksi[Mpa] 47[325] Mn 0.27-0.63 Yield Point min ksi[Mpa] 26[180] P 0.035 Elongation 35% S 0.035 Si 0.25 QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3.
ASTM A179 OD 420mm Cold Rolled Steel Pipe
Torich ASTM A179 Seamless Precision Cold Drawn Carbon Steel Tubes Brief introduction: Name ASTM A179 Seamless Precision Cold Drawn Carbon Steel Tubes Standard ASTM A79 Production method Cold drawn Section shape Round OD 5-420mm WT 0.5-50mm Length Max12000mm Application Boilers, supreheaters, heat exchangers, condenser, U bend tubes according to customer request Mechanical properties Tensile strength:325Mpa Elongation: 35 % Hardness: 72HRB Yield point: 180 Mpa Heat treatment
ASTM A268 Seamless and Welded Ferritic and Martensitic Stainless Steel Pipes
ASTM A268 Seamless and Welded Ferritic and Martensitic Stainless Steel Pipes Applications: For general service Technique: Cold-Formed and Hot Rolled Size range: O.D. 4-230mm W.T. 1-30mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Grade: TP4 05 TP4 10 TP2 49 TP4 30 TP4 43 TP4 46-1 TP4 46-2 TP4 09 UNS S40500 S41000 S42900 S43000 S44300 S44600 S44600
Big Diameter Cold Drawn OD120mm WT1.5mm 316 Stainless Steel Pipe
Big Diameter Cold Drawn OD120mm WT1.5mm 316 Stainless Steel Pipe Type: Stainless, Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: Cold rolled Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6.
18CrNiMo7-6 Case Hardened Tubing Alloy Structural Steel Pipe For Engine Drive Shaft
18CrNiMo7-6 Case Hardened Tubing Alloy Structural Steel Pipe For Engine Drive Shaft Material Specification 18CrNiMo7-6 is a high-quality alloy structural steel known for its excellent case hardening properties. It is widely used in the manufacturing of engine drive shafts due to its superior strength, toughness, and wear resistance. This steel grade is particularly suitable for components that require high surface hardness and a tough core. Key Features High Strength and
Duplex 2205 Pipe ASTM A789/A790 NACE MR0175 50/50 Austenite-Ferrite Duplex Stainless Steel Pipe
Duplex 2205 Pipe Silicon Alloy Steel Duplex Stainless Steel Pipe For Chemical Processing Material Description Duplex 2205 (UNS S32205 / S31803) is a nitrogen-alloyed duplex stainless steel with an approximately 50/50 austeniteferrite structure.It offers: About twice the yield strength of 304L/316L High resistance to pitting, crevice corrosion and chloride SCC Reliable performance in chloride-bearing, mildly sour and mixed acid/alkali chemical media This makes Duplex 2205
Hydraulic Systems EN10305-4 Seamless Cold Drawn Tube with Cold Rolling Production
EN10305-4 Precision Steel Tubes Hydraulic Systems with Cold Drawn and Cold Rolling Production EN10305-4 seamless precision bending steel tubes of hydraulic systems Size: 6-100mm Delivery condition: +N, +C,+LC, +SR, +A 1. Standard: EN10305-4 Cold drawn Precision Seamless Steel Pipes 2. Steel Grade: E215,E235,E355, other materials upon agreement with customers. 3. Production method: Cold drawing on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance,
