heat exchanger tubes
"
Polishing Capillary Stainless Steel Seamless Pipe Bright Annealing Astm A213
Bright Annealing Seamless Stainless Steel Capillary Tube Commodity name Small diameter bright annealing seamless stainless steel capillary tube Process method cold rolled/cold drawn Stainless steel grades TP304/304L, TP310/S,TP316/316L, TP317L, TP321, TP347/H S31803/2205, 904L Standard ASTM A213, A312, A511, A270, A269, A789, A790, DIN17456, DIN17458, JIS G3463 Size 6 x 0.3 ..... Testing Chemical Analysis. Hydrostatic or Nondestructive Electric Test, Intergranular Corrosion
Small Precision Steel Tube Disposable SS Needle Blunts ISO 9001 ASTM A269
" - 2" Length Disposable SS Needle Blunts Disposable Dispensing Needle Blunts Syringes Needle Tube Syringes Process method cold rolled/cold drawn Stainless steel grades TP304/304L, TP310/S,TP316/316L, TP317L, TP321, TP347/H S31803/2205, 904L Standard ASTM A213, A312, A511, A270, A269, A789, A790, DIN17456, DIN17458, JIS G3463 Size 0.8x0.1...... Testing Chemical Analysis. Hydrostatic or Nondestructive Electric Test, Intergranular Corrosion Test, Flaring Test, Flattening
Titanium Welded Seamless Alloy Steel Pipe TA3 TA9 TA10 0.5 - 2mm Wall Thickness
Titanimu Alloy Steel Pipe GB/T 362595 for Heat Exchanger and Cold Condensors Material : Titanimu alloy steel, Characteristic of the material:e High strength ,low density,good mechanical property ,good tenacity.good corrosion resistanc. It can be made by seamless and welded.and widely apply in power generation,Aerospace,oil and gas ,chemical processing. Available size list: Cold drawn Seamless pipes with Ti and Ti alloy grade condition Diameter/mm Wall thickness /mm 0.5 0.6 0
Cold Drawn Alloy Steel Pipe ASTM A335 12.7 - 177.8mm OD 4 - 12.5m Length
Alloy Pipe ASTM A335 P5, P9, P11, P22, P91 Alloy steel pipes are used in the energy industry for high temperature and very low-temperature service (cryogenic), or for applications with very high pressures. ASTM A335 alloy steel pipes fit ASTM A234 WPx series buttweld fittings (WP5, WP9, WP91) and A182 Fx forged fittings and flanges (A182 F5, F9, F11, F22, F91). All these materials have similar chemical and mechanical properties and can be joined or welded. Size range: O.D.:6
ASTM A524 Seamless Low Carbon Steel Pipe 8-426mm OD
A524 Seamless Low-Carbon Steel Pipe for Atmospheric and Lower Temperatures 1. Material Overview ASTM A524 (also designated A524/A524M-21 in its latest revision) defines the standard specification for seamless low-carbon (killed) steel pipe , primarily intended for service at atmospheric and lower temperatures , covering nominal pipe sizes (NPS) from 1/8 to 26 with wall thickness per ANSI B36.10 The steel is required to be killed steel , produced via open-hearth, electric
Welded Seamless Stainless Special Steel Pipe For Machinery Construction
Wall Thickness with 1.0 to 3.0mm, Mirror and Satin Finish : MATERIAL 201/304/316 STANDARD ASTM A554 PLACE OF ORIGIN CHINA SIZE 20 x 40 to 60 x 120mm THICKNESS 1.0~3.0 mm LENGTH 6m or as customers' request SURFACE 180G, 320G, 400G Satin / Hairline, 400G, 500G, 600G, 800G Mirror finish, Brushed, TIN titanium plated COLOR NON TEST Squash test, Extended test, Water pressure test, Crystal rot test, Heat treatment, NDT DELIVERY 7-30 days after receiving deposit or L/C depending on
ASTM A335 Alloy Steel Pipe OD 6 - 450mm for High Temperature Services
ASTM A335 Alloy Steel Pipe OD 6 - 450mm for High Temperature Services ASTM A335 Seamless ferritic and alloy steel pipe for high temperature service Applications: for Boilers,Superheaters,Heat-Exchangers Size range: O.D.:6-420mm W.T.:1-50mm L: according to customer requirement Astm a103 ASTM A335 ferritic alloy steel seamless steel pipe Steel Grade and Chemical Compositions: Steel Grade C Mn P S Si Cr Mo max max max max max min P5 0.15 0.30-0.60 0.025 0.025 0.50 4.00-6.00 0.45
UNS N08825 ASTM B163 Standard Nickel Alloy Steel Pipe
ASTM B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat Exchanger Tubes This specification covers seamless tubes of nickel and nickel alloy for use in condenser and heat-exchanger service. This covers outside diameter and average wall, or outside diameter and minimum wall tube. Tube shall be furnished in the alloys and conditions defined by this specification. The material shall conform to the composition limits of nickel, copper, molybdenum,
GB/T19447 TORICH 0.1mm Seamless Copper Pipe
GB/T19447 Seamless Copper and Copper Alloy Steel Low Fin Enhanced Evaparation Tube Quick Detail: The low-finned tube is produced by rolling (three-roll diagonal rolling), and its working principle is as follows: a mandrel is lined with the smooth tube, the tube material moves in a spiral straight line under the drive of the roller blade, and finnings are gradually processed on its outer surface through the pass formed by the rolling groove and mandrel. In order to more
