alloy steel seamless pipe
"
WT 50mm Annealed Finned ASME SA179 Heat Exchanger Pipe
Products Description: ASME SA179 Seamless Cold -Drawn Low -Carbon Steel Heat -Exchanger Tubes and Condenser Tubes This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon
ISO9001 Certified N06625 Inconel 625 Exhaust Tubing
Inconel 625 Tubes Sans Soudure for Heat Exchanger Nickel and Nickel alloy referred to the alloys main elemental contents of Ni, Cu, Cr, Fe and Mo. Those all characterized by its combination performance of high corrosion resistance and heat ability at temperature 650 ~ 1000 C. According to main alloy elements content can divide: Ni Cr Mo alloy (Inconel 600 Series) Ni-Cr-Fe alloy (Incoloy 800 Series) Ni - Mo Ni Cu (Hastelloy Series) Pure Nickel and low alloy nickel
Low Temperature ASTM A334 Gr.1 Gr.6 Seamless Welded Carbon Steel Tubes
Low Temperature ASTM A334 Gr.1 Gr.6 Seamless Welded Carbon Steel Tubes Product Description This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thickness has an adverse affect on low-temperature impact properties. Standard ASTM A334 O.D. 3.2 - 500 mm W.T. 0.5 - 30 mm Length Max 12000 mm
JIS G3452 Carbon 10.5mm Cold Drawn Seamless Steel Tube
JIS G 3452 Carbon steel pipes for ordinary piping JIS G3452 Carbon Steel Pipes for Ordinary Piping specifies the carbon steel pipe, hereinafter referred to as the "pipes", used for the pipings for conveying steam, water, oil, gas, air, etc. at comparatively low working pressure. CHEMICAL COMPOSITION unit (%) Steel grade P S SGP 0.040max 0.040max Note: Special steel grade is also available, according to customer request. MECHANICAL PROPERTIES Steel grade Tensile strength Mpa
Round ERW 12000mm Length Welded Steel Tube
4.76*0.7 Copper Coating Single Welded Steel Tube 1. Standard ASTM A254 Copper-brazed steel tubing SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance 0.05mm Length 180Kg/coil; 700-1000m/coil; per customers request 5.
Copper Coated Seamless 8mm Od Low Finned Tube
Copper Coated Seamless Low Finned Tube PRODUCT DESCRIPTION: Keyword: Copper Low Fin Tube Material: C10200, C11000 Etc Fin Thickness: 0.1mm - 2mm Tube OD: 8mm - 55mm Length: max 12m Application: For Boiler And Heat Exchanger End Protector: Plain End / Beveled End Surface: Copper Coated Test and Inspection: Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: Incoming Raw Material Inspection Raw
ASTM A254 TORICH 10mm Od Welded Steel Tube
4.76*0.65 Copper Coating Single Welded Steel Tube 1. Standard ASTM A254 Copper-brazed steel tubing SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance 0.05mm Length 180Kg/coil; 700-1000m/coil; per customers request 5
Copper Coating 0.4μM Single 4.76x0.65 Welded Steel Tube
4.76*0.65 Copper Coating 0.4m Single Welded Steel Tube 1. Standard ASTM A254 Copper-brazed steel tubing SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance 0.05mm Length 180Kg/coil; 700-1000m/coil; per customers
Oval Hex A500 Rectangle Hollow Precision Steel Tube Seamless
Verified Square Hollow, Rectangle Hollow, Oval,Hex,Omega,Double Fins Precise And Long Special Seamless Shaped Pipe Product name: Special seamless shaped pipe Package: as per customers requests Production tech: Cold drawn Size: as per customer's requests. Special Shape Tube for such diverse applications as: Automotive shafts and steering columns Tools and tool handles Torque wrenches and wrench extensions Telescoping components Rebar and direct drilling couplers Components
