Seamless Steel Tube

ASTM A523 Grade A Seamless Steel Pipes for High Pressure Cable Circuits Introduction: Product name Grade A Seamless Steel Pipes for High Pressure Cable Circuits Stadard ASTM A523 Technique ERW, seamless OD 5-420mm WT 5.56-14.27mm Application Cable, circuits Section shape Round Coating Yes Surface treatment Oiled Port Shanghai,Ningbo Terms of Delivery FOB,CIF,CFR Terms of Payment T/T Grade Type C max Mn max P max S max Grade A Heat Product Heat Product Heat Product Heat

EN10210 S355NH Hot Rolled Bogie Frame Seamless Round Hollow Steel Tube Introduction: Product name Hot rolled seamless steel tubes Stadard EN10210 Technique Hot rolled OD 5-420 WT 0.5-50 Application Automotive industry Section shape Round Surface treatment Oiled to prevent rust Port Shanghai,Ningbo Terms of Delivery FOB,CIF,CFR Terms of Payment T/T Size scope: OD: up to 2500mm ---Circular OD: up to 800*800mm---Square OD:up to 750*500mm---Rectangular OD: up to 500-250mm---

En10305-2 E155 E195 Precision Steel Tubes 1.Chinese leading supplier of precision steel pipes, using high-quality hydraulic precision steel pipes, Precision carbon steel pipe, precision seamless steel pipe, CDs steel pipe, CDW steel pipe 2.Production process: Cold rolling mill and cold rolling mill Size: 20-350 mm When sending the inquiry, please describe the final heat treatment. 3.Steel Grade and Chemical Compositions Steel Grade C Si MN P S Steel Name max max max max max

ASTM A213 Seamless steel Tube for heat exchanger Product details: This specifification2 covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, TP304, etc. The tubing sizes and thicknesses usually furnished tothis specifification are 1⁄8 in. [3.2 mm] in inside diameter to 5 in.[127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to12.7 mm], inclusive, in minimum wall thickness or, if specifified in the order,

ASTM A210 Grade A-1 Seamless Steel Tube for Boiler Tubing Product Details Standard:ASTM A210 Material :Grade A-1 And Grade C OD :12.7-127mm ID :0.9-12.7mm Technique: Cold-drawn Surface Condition:Pickling Or Shot Blasting Application:For Boilers,Superheaters,Steam linepipes of boilers Chemical Composition: Steel Grade and Chemical Compositions: Grade C Mn P S Si A-1 ≤0.27 ≤0.93 ≤0.035 ≤0.035 ≥0.10 C ≤0.35 0.29-1.06 ≤0.035 ≤0.035 ≥0.10 Mechanical proporties: Grade Tensil

ASTM A192 Carbon Steel Boiler Tubes For High Pressure Boilers Size: OD: 12.7-177.8mm WT: 1-25.4mm Length: according to customer requirement Application: For Boilers,Superheaters, Heat-Exchangers, High-pressure Boilers Manufacture: Tubes are manufactured by seamless process and both hot finished and cold finished are applicable Heat treatment: Hot finished tubes need not be heat treated. Cold Finished tubes are heat treated after the final cold finishing pass at a temperature

GCr15 100Cr6 Seamless Steel Tube Steel Grade/Steel Material: Steel Grade mass fraction % C Si Mn P S Cr Mo GCr15 0.95-1.05 0.15-0.35 0.20-0.40 ≤0.027 ≤0.020 1.30-1.65 ≤0.10 100Cr6 0.93-1.05 0.15-0.35 0.25-0.45 ≤0.025 ≤0.015 1.35-1.60 ≤0.10 100CrMnSi6-4 0.93-1.05 0.45-0.75 1.00-1.20 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMnSi6-6 0.93-1.05 0.45-0.75 1.40-1.70 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMo7 0.93-1.05 0.15-0.45 0.25-0.45 ≤0.025 ≤0.015 1.65-1.95 0.15-0.30 Delivery Condition:

Torich 133*4*4113mm 304L Alloy Sputtering Sputtering Target Stainless Steel Tube Grade:304L Specification: 133*4*4113mm Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness deviation≤0.10mm Straightness deviation: Overall length direction≤0.5mm Standard:DIN2462 Special requirements: 1. Quality requirements: Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness

Torich 133*4*4113mm 304L Planar Sputtering Target Sputtering Target Stainless Steel Tube Torich 133*4*4113mm 304L Sputtering Target Stainless Steel Tube Grade:304L Specification: 133*4*4113mm Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness deviation≤0.10mm Straightness deviation: Overall length direction≤0.5mm Standard:DIN2462 Special requirements: 1. Quality requirements: Tolerance of OD:0.1-0.4mm Tolerance of ID