EN 10305-2 Welded Cold Drawn Precision Steel Tubes for Automotive Shock Absorbers TORICH EN 10305-2 welded cold drawn precision steel tubes are manufactured from electric resistance welded (ERW) carbon steel tubes followed by cold drawing to achieve controlled dimensional accuracy, wall thickness ...
Outside Diameter (OD):4–150 Mm Within The Standard's Scope
Wall Thickness:0.5–10 Mm For Specified Dimensional Combinations
Length:1–12 M Supply Range, Subject To Manufacturing Requirements; Custom Cut Lengths Available
Heat Treatment:+C, +LC, +SR, +A, +N
Main Application:Automotive Shock Absorber Working Cylinders
Product Description
EN 10305-2 Welded Cold Drawn Precision Steel Tubes for Automotive Shock Absorbers
TORICH EN 10305-2 welded cold drawn precision steel tubes are manufactured from electric resistance welded (ERW) carbon steel tubes followed by cold drawing to achieve controlled dimensional accuracy, wall thickness consistency, and smooth internal and external surfaces.
Designed for automotive shock absorber manufacturing, these precision tubes are suitable for shock absorber working cylinders where internal diameter accuracy, roundness, surface finish, and weld integrity are important for piston movement and reliable hydraulic performance.
Available steel grades include E155, E195, E235, E275, and E355, with delivery conditions +C, +LC, +SR, +A, and +N according to EN 10305-2:2016. Dimensions, surface finish, inspection requirements, and cut lengths can be specified according to customer drawings.
1. Product Specifications
Parameter
Specification
Product Name
Welded Cold Drawn Precision Steel Tube
Material
Non-alloy quality carbon steel
Manufacturing Standard
EN 10305-2:2016
Steel Grades
E155, E195, E235, E275, E355
Manufacturing Process
ERW welding followed by cold drawing
Outside Diameter (OD)
4–150 mm within the standard's scope
Wall Thickness
0.5–10 mm for specified dimensional combinations
Length
1–12 m supply range, subject to manufacturing requirements; custom cut lengths available
Outside Diameter Tolerance
±0.08 to ±0.80 mm for listed sizes in +C/+LC conditions; heat-treated tolerances depend on T/D ratio
Wall Thickness Tolerance
±7.5% or ±0.1 mm, whichever is greater, when ordered by OD × WT or ID × WT
Eccentricity
Maximum 7.5% calculated according to EN 10305-2 when specified by OD × ID
Straightness
For OD >15 mm and L >1,000 mm: maximum deviation 0.0015L for ReH ≤500 MPa or 0.002L for ReH >500 MPa; additional 3 mm maximum over any 1 m length
Surface Roughness
Ra ≤4 μm on internal and external surfaces; improved roughness by agreement
Surface Condition
Cold-drawn finish, with additional surface treatment available by agreement
Heat Treatment
+C, +LC, +SR, +A, +N
End Condition
Square-cut ends free from harmful burrs; custom finishing available
Inspection Documents
EN 10204 Type 2.2, 3.1, or 3.2 as specified
Main Application
Automotive shock absorber working cylinders
Note: EN 10305-2 dimensional tolerances depend on tube size, delivery condition, and the dimensions specified in the order. Reduced tolerances and additional inspection requirements must be agreed upon before production.
2. Main Features
2.1 Controlled Dimensional Accuracy
EN 10305-2 establishes defined dimensional tolerances for cold-drawn welded tubes. For example, a 30 mm outside diameter has a standard tolerance of ±0.08 mm in the +C or +LC condition.
The standard also permits reduced diameter tolerances under Option 16, corresponding to half the applicable standard tolerance, with a minimum of ±0.05 mm.
For shock absorber working cylinders, the inside diameter should be separately specified when piston-to-bore clearance is critical.
2.2 Defined Internal Surface Quality
EN 10305-2 specifies a maximum surface roughness of Ra 4 μm for the internal and external tube surfaces.
For shock absorber cylinders requiring a finer piston-running surface, additional finishing and verification can be specified according to the customer's drawing.
A target such as Ra ≤0.4 μm requires a separately agreed finishing process and inspection criteria; it is not the default EN 10305-2 requirement.
2.3 Material Strength According to Delivery Condition
Cold drawing and heat treatment produce different mechanical properties. For example, E235 steel has the following minimum tensile strengths:
E235+C: 490 MPa
E235+LC: 440 MPa
E235+SR: 440 MPa
E235+N: 340–480 MPa tensile strength range
The correct delivery condition should be selected according to subsequent machining, forming, welding, and mechanical performance requirements.
2.4 Controlled Weld Integrity
The welded tube is cold drawn after electric resistance welding to improve dimensional consistency.
Where required, EN 10305-2 provides optional non-destructive testing for longitudinal imperfections and leak-tightness verification. These additional inspections can be specified to support the quality requirements of shock absorber components.
3. Our Advantages
3.1 Internal Diameter Control for Consistent Piston Assembly
In shock absorber manufacturing, an acceptable outside diameter does not automatically guarantee that the working cylinder has the required internal clearance. Variations in internal diameter, roundness, and wall thickness eccentricity may affect piston movement and assembly consistency.
TORICH supports dimension-based production specifications covering:
OD and ID tolerances defined independently where required.
Reduced diameter tolerances according to EN 10305-2 Option 16.
Reduced eccentricity requirements under Option 18.
Internal surface roughness measurement according to an agreed inspection plan.
This approach helps customers evaluate tube suitability against the actual functional dimensions of the shock absorber cylinder.
3.2 Weld Quality Verification for Hydraulic Reliability
For welded shock absorber cylinders, weld-zone integrity is an important consideration, particularly when components are exposed to repeated pressure fluctuations and vibration. EN 10305-2 provides specific inspection options:
Option 12: Non-destructive testing for longitudinal imperfections.
Option 13: Non-destructive testing for leak-tightness.
Option 25: Flattening or drift-expanding testing for +A or +N tubes when specified.
TORICH can incorporate the agreed inspection requirements into the production and quality documentation. This enables customers to define weld inspection requirements before sample approval and serial production.
3.3 Delivery Conditions and Cut-Length Control for Downstream Processing
Shock absorber manufacturers may encounter distortion, inconsistent dimensions, or additional machining requirements during secondary processing. TORICH offers different delivery conditions to match the manufacturing sequence.
For example, +C provides higher cold-worked strength, while +SR reduces stresses introduced by cold drawing. The +N condition provides normalized mechanical properties and generally greater elongation than +C.
Custom cutting, end finishing, and dimensional inspection can also be specified according to customer drawings. EN 10204 Type 3.1 inspection certificates can be supplied when requested in the purchase order, supporting material traceability and production quality verification.
4. Execution Standards
Primary Standard: EN 10305-2:2016 — Welded cold drawn steel tubes for precision applications.
Related International Standards
Standard System
Reference Standard
Description
EN
EN 10305-2:2016
Welded cold drawn precision steel tubes
ASTM
ASTM A513/A513M-25, Type 5
Electric resistance welded mechanical tubing, drawn over a mandrel
GOST
GOST 10707-80
Cold-deformed electric-welded steel tubes
JIS
JIS G 3445:2021
Carbon steel tubes for machine structures
GB
GB/T 31315-2014
Cold-drawn or cold-rolled precision welded steel tubes for mechanical structures
Note: These are related product standards rather than automatically interchangeable specifications. Chemical composition, mechanical properties, dimensional tolerances, inspection methods, and delivery conditions differ. Any alternative-standard supply requires technical review and customer approval.
5. Application
Automotive Twin-Tube Shock Absorber Working Cylinder
The working cylinder is an important component of a twin-tube hydraulic shock absorber. It provides the internal cylindrical surface along which the piston moves during suspension compression and rebound. The working cylinder must maintain appropriate piston clearance and surface quality to support controlled hydraulic damping.
Key Tube Requirements
Internal Diameter Accuracy: Controls the clearance between the piston assembly and the cylinder bore.
Internal Surface Finish: Helps reduce unwanted friction and supports the intended operating conditions of piston components.
Roundness and Eccentricity: Help maintain uniform dimensions around the cylinder circumference.
Weld Integrity: Supports the structural and sealing requirements established by the shock absorber design.
Material Consistency: Provides predictable mechanical behavior during cutting, forming, assembly, and subsequent processing.
E235 welded cold drawn precision steel tubing is a commonly considered material for this application. The final grade, delivery condition, dimensional tolerances, and bore finish must be selected according to the shock absorber manufacturer's engineering specification.
6. Chemical Composition
Chemical composition requirements according to EN 10305-2:2016, Table 2. Values are expressed as mass percentages based on cast analysis.
Steel Grade
Steel Number
C Max. (%)
Si Max. (%)
Mn Max. (%)
P Max. (%)
S Max. (%)
Total Al Min. (%)
E155
1.0033
0.11
0.35
0.70
0.025
0.025
0.015
E195
1.0034
0.15
0.35
0.70
0.025
0.025
0.015
E235
1.0308
0.17
0.35
1.20
0.025
0.025
0.015
E275
1.0225
0.21
0.35
1.40
0.025
0.025
0.015
E355
1.0580
0.22
0.55
1.60
0.025
0.025
0.020
Notes: (1) The values represent cast analysis limits, not typical measured compositions. (2) The minimum total aluminium requirement does not apply when sufficient alternative nitrogen-binding elements, such as Ti, Nb, or V, are present in accordance with the standard. (3) Product analysis deviations must comply with EN 10305-2:2016, Table 3.
7. Mechanical Properties
Mechanical properties at room temperature according to EN 10305-2:2016, Table 4. The table compares the cold-drawn hard (+C) and normalized (+N) delivery conditions.
Steel Grade
+C Tensile Strength Rm Min. (MPa)
+C Elongation A Min. (%)
+N Tensile Strength Rm (MPa)
+N Yield Strength ReH Min. (MPa)
+N Elongation A Min. (%)
E155
400
6
270–410
155
28
E195
420
6
300–440
195
28
E235
490
6
340–480
235
25
E275
560
5
410–550
275
22
E355
640
4
490–630
355
22
Notes: (1) Rm = tensile strength; ReH = upper yield strength; A = elongation after fracture. (2) For +C material, the standard does not specify a separate minimum yield strength value in Table 4. (3) For +N tubes with outside diameter ≤30 mm and wall thickness ≤3 mm, the minimum yield strength values are 10 MPa lower than those shown in the table. (4) Mechanical properties for +LC, +SR, and +A delivery conditions are specified separately in EN 10305-2:2016, Table 4. (5) Subsequent cold working or heat treatment may change the mechanical properties.
Product Gallery
Frequently Asked Questions
Q: Are you a trading company or a manufacturer?
A: We are a manufacturer, and we can also operate as a trading company.
Q: How long is your delivery time?
A: Generally speaking, it is 10–15 days if the goods are in stock, or 30–40 days if the goods are not in stock. It depends on the quantity.
Q: Do you provide samples? Are they free or extra?
A: Yes, we can offer samples free of charge, but the freight cost is to be paid by the buyer.
Q: What are your terms of payment?
A: For payments of USD 2,000 or less, 100% in advance. For payments of USD 2,000 or more, 30% T/T in advance with the balance before shipment. If you have any other questions, please feel free to contact us.
Auto Parts ASTM A513 Welded Steel Tubes with DOM production ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Applications: for Machinery, Mechanical Engineering 1. Standard: ASTM A513 cold rolling welded precision steel tubes 2. Steel Grade: SAE1010, SAE1020, other ...
Steel Pipes with high precision for Hydraulic Systems with Black Phosphating surface Black Phosphated Hydraulic Tubes with High Precision and tight tolerance, the tubes are produced by precision cold drawn and cold rolling, then bright annealed in a protected atmosphere, afterwards it is blackphosph...
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37 Production Process: Cold rolling by Cold pilger machine and Cold rolling machine,galvanized and zinc plated could be applied. Cold Rolled and Galvanized Steel Tube Production process: DIN highly accurate, cold rolled and bright ...
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
SUBMIT
More information facilitates better communication.
Mr
Mr
Mrs
OK
Submitted successfully!
We will call you back soon!
OK
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
SUBMIT
Please leave your correct email and detailed requirements (20-3,000 characters).