Heat Exchanger Seamless Cold Drawn Steel Tube T5 T9 T11 T12 T22 Oiled Surface
Product Details
precision stainless steel tubing
,seamless carbon steel tube
Alloy Steel Pipe Heat-Exchanger Cold Drawn Boiler Tubes T5 T9 T11 T12 T22
Torich International Co.,Ltd is specialized in manufacturing Alloy Steel Grade T5 T9 T11 T12 T22, according to technical standard of SA213, Standard Specificiation for Seamless Ferritic and Austenitic Alloy Steel Boiler, Superheater, and Heat Exchanger Tubes.
Covers 2 Points of Wall Thickness Tolerace:
1. Minimum wall thickness
2. Average wall thickness
Pls specify in the enquiry detail.
The Tubing sizes an thickness covers:
OD: 1/8'' (3.2mm) to 5'' (127mm)
WT: 0.015'' to 0.500'' (0.4 to 12.7mm)
Alloy Steel Pipe Heat-Exchanger Tubes SA213 Steel Grades Chemical Composition and Mechanical Properties:
| Steel Grade | C | Mn | P | S | Si | Cr | Mo |
| max | max | max | max | max | min | ||
| T5 | 0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.5 | 4.0-6.0 | 0.45-0.65 |
| T9 | 0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.25-1.00 | 8.0-10.0 | 0.90-1.10 |
| T11 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50-1.00 | 1.0-1.50 | 0.44-0.65 |
| T12 | 0.05-0.15 | 0.30-0.61 | 0.025 | 0.025 | 0.50 | 0.80-1.25 | 0.44-0.65 |
| T21 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50-1.00 | 2.65-3.35 | 0.80-1.06 |
| T22 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50 | 1.90-2.60 | 0.87-1.13 |
| Steel Grade | Tensile Strength | Yield Strength | Elongation | Hardness.Max | |||
| min.ksi [Mpa] | min.ksi [Mpa] | % | Brinell/Vickers | Rockwell | |||
| T5b | 60[415] | 30[205] | 30 | 179HBW/190HV | 89HRB | ||
| T9 | 60[415] | 30[205] | 30 | 179HBW/190HV | 89HRB | ||
| T12 | 60[415] | 32[220] | 30 | 163HBW/170HV | 85HRB | ||
| T91 | 85[585] | 60[415] | 20 | 250HBW/265HV | 25HRC | ||
| T92 | 90[620] | 64[440] | 20 | 250HBW/265HV | 25HRC | ||
Mechanical Properties:
Tensile Strength
Yield Strength
Elongation
Mechanical property requirements do not apply to tubing smaller than 1/8'' (3.2mm) in inside diameter or thinner than 0.015'' (0.4mm) in thickness
Hardness Requirements:
Brinell, Vickers or Rockwell hardness tests shall be made on specimens frrom each lot.
Flattening Test:
One flattening test shall be made on specimens from each end of one finished tube, not the one used for flaring test, from each lot.
Flaring Test:
One flaring test shall be made on specimens from each end of one finished tube, not the one used for flattening test, from each lot
Surface Condition:
Ferritic alloy cold-finished steel tubes shall be free of scale and suitable for inspection. A slight amount of oxidation is not considered scacel.
Ferritic alloy hot-finished steel tubes shall be free of loose scale and suitable for inspection
Stainless steel tubes shall be pickled free of scale. When bright annealing is used, pickling is not necessary.
Any special finish requirement shall be subject to agreement between the customer and our production teams.
| Packing and Container Loading for Alloy Steel Pipe:
Referenced Documents: ASTM A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ASTM A941 Terminology Relacting to Steel, Stainless Steel, Related Alloys and Ferroalloys ASTM A1016/A1016M Specificiation for General Requirements for Feeritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes ASTM E112 Test Method for Determining Average Grain Size
Keywords: alloy steel tubes, austentic stainless steel, boiler tubes, ferritic stainless steel, heat exchanger tubes, high-temperature applications,seamlss steel tubes, steel tubes, superheater tubes, temperature service application-high |
|---|
Looking for ideal Seamless Heat-Exchanger Tubes Manufacturer & supplier ? We has a wide selection at great prices to help you get creative. All the Alloy Steel Round Pipe Grades are quality guaranteed. We are China Origin Factory of Round Tube Steel. If you have any question, please feel free to contact us.
Product Categories : Seamless Alloy Steel Tubes
QUALITY CONTROL
1~ Incoming Raw Material Inspection
2~ Raw Material Segregation to avoid steel grade mix-up
3~ Heating and Hammering End for Cold Drawing
4~ Cold Drawing and Cold Rolling, on line inspection
5~ Heat Treatment, +A, +SRA, +LC, +N, Q+T
6~ Straightening-Cutting to specified length-Finished Measuring Inspection
7~ Machanical Testing in own labs with Tensile Strength, Yield Strength, Elongation, Hardness, Impact, Mictrostruture etc
8~ Packing and Stocking.
100% of our steel tubes are dimensionally checked
100% of our steel tubes are visually checked to assure they have a perfect surface condition and no surface defects.
100% eddy current test and ultrosonic test to eliminate longitudinal and transversal defects.
-
Auto Parts ASTM A513 Cold Rolling Welded Steel Tubes with DOM Production
Auto Parts ASTM A513 Welded Steel Tubes with DOM production ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Applications: for Machinery, Mechanical Engineering 1. Standard: ASTM A513 cold rolling welded precision steel tubes 2. Steel Grade: SAE1010, SAE1020, other materials upon agreement with customers. 3. Production method: Cold rolling on the weled steel tubes, to reach high accuracy on the OD and WT tolerance 4. Size range: O.D.:6-350mm W.T. -
25mm Diameter Bright Annealing Seamless Steel Tube for Hydraulic Systems
EN10305-1 E235 E355 NBK Bright Annealing Precision Steel Pipes for Hydraulic Systems EN10305-1 NBK Bright Annealed Precision steel pipes for Hydraulic system OD:4-80 (mm) WT0.5-10 (mm) Length 1000-12000mm Product name: Seamless Precision Steel Pipe Application: for hydraulic systems precision steel pipes for Hydraulic system OD (mm) WT (mm) Length (mm) 4 0.5 5800-6000 4.0 1.0 5800-6000 5.0 1.0 5800-6000 6.0 1.0 5800-6000 6.0 1.5 5800-6000 8.0 1.0 5800-6000 9.5 0.89 5800-6000 -
Precision Seamless Black Phosphating Steel Tube for Hydraulic Systems
Steel Pipes with high precision for Hydraulic Systems with Black Phosphating surface Black Phosphated Hydraulic Tubes with High Precision and tight tolerance, the tubes are produced by precision cold drawn and cold rolling, then bright annealed in a protected atmosphere, afterwards it is blackphosphated on the surface Production process: DIN series tubes, cold drawn and bright annealed precision seamless steel tube is used as the tube to be phosphated. The phosphorization is -
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37 Production Process: Cold rolling by Cold pilger machine and Cold rolling machine,galvanized and zinc plated could be applied. Cold Rolled and Galvanized Steel Tube Production process: DIN highly accurate, cold rolled and bright seamless steel tube is used as the tube to be galvanized. The outer wall of tube is electroplated. The caps are covered at two ends of tube to prevent from the dust. Main Features:
