welded steel pipe
"
143 - 187 HB BS 970 805H20 Alloy Steel Tube Cold Drawn with Normalized / Quenched
BS970 805H20 Alloy Steel Tube BS970 Alloy Steel Grade Alloy steels can be supplied with a grain size of 5 to 8 determined in accordance with BS4490 or another method by agreement. Steel supplied to hardenability reqquirements are supplied fine-grained and if coarse grain steel is specifically required, then the hardenaility shall be subject to negotiation. 251A58 251H60 251A60 525H60 525A58 685H57 525A60 704H60 525A61 705H60 685A57 735H51 704A60 805H60 705A60 735A51 735A54
Welded Round Stainless Steel Tubing Coil 200 - 1000mm For Beer Drinks Evaporator
Round Stainless Steel Coil Tube Evaporator For Equipment Of Beer & Drinks,ASTM A249/A269 Sizw Range : outer diameter 3-25.4mm Wall Thickness: 0.3-2.0mm Inner Bore Size of Coil : 500-1500mm General Delivery Length: 200-1000mm Example of physical Properties of steel pipe under Bright Annealing Condition: Elongation Percentage: >55% Surface Hardness: 550N/MM2 Yield Strength :>195N/NM2 Coil tubes Specification Table O.D mm W.T mm 3.0-4.0 4.01-6.00 6.01-8.00 8.01-10.0 10.01-12.7
25mm Welded Stainless Steel Tube , Feedwarter Heater Ss Seamless Pipes
ASTM A688 Welded Austenitic 25mm Stainless Steel Tube For Feedwarter Heater Manufacturing process - Automatic arc welding - Laser welding Chemical Requirement Grade: TPXM-19 TPXM-10 TPXM-11 TPXM-29 TP304 TP304L TP304H UNS S20400 S20910 S20900 S21904 S24000 S30400 S30403 S30409 C, max 0.03 0.060 0.080 0.04 0.08 0.08 0.035 0.040-0.10 Mn, max 7.0-9.0 4.0-6.0 8.0-10.0 8.0-10.0 11.5-14.5 2.00 2.00 2.00 P, max 0.045 0.045 0.045 0.045 0.060 0.045 0.045 0.045 S, max 0.030 0.030 0
Duplex / Super Duplex Polished Stainless Steel Tubing With Higher Intensity
ASTM /ASME A789/ SA 789 Duplex and Super Duplex Steel Products The duplex material is a kind of ferrite - austenitic duplex stainless steel,which is integrated conducive properties both of ferrite and austenitic and provided with higher intensity as well as tenacity. Available Size: O.D 6-219.1mm W.T 0.5-12.7mm L 20 meter Max Available Specification: ASTM /ASME A789/SA789 ; ASTM /ASME A790/SA790 Delivery Condition: 1.Annealed and Pickled 2.Bright and Annealed 3.Annealed and
Electric Resistance Welded Drawn Over Mandrel Steel Tubing With Cold Finished
TORICH BS6323-6 Cold Finished Electric Resistance Welded DOM Steel Tube Product Description: Standard: BS6323-6 Size Range: OD: 6-350mm WT: 1-35mm Length: max 12000mm Steel Grade: CEW1a CEW2a CEW3a CEW4a CEW5a Delivery Condition: 1 BK Cold finished(hard) 2 BKW Cold finished(soft) 3 GBK Annealed 4 NBK Normalized 5 GZF Annealed (including de-scaling) 6 NZF Normalized (including de-scaling) Product Pictures: Packing: Characteristic: Good concentricity Good OD and ID tolerance
Seamless / Welded Honed Cylinder Tubing Hot Rolled Astm A-668 A312 Standard
ASTM A-668 ASTM A312 Seamless and Welded Pipes Honing Grinding Tube Product Name Honing Grinding Steel Pipe Usage Used for low pressure liquid delivery, such as water, gas, and oil. Process LSAW - UO(UOE),RB(RBE),JCO(JCOE) DSAW -Double Submerged arc welded Standard API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, GB/T3091, GB/T9711 Certificate API 5L PSL1 / PSL2, API 5CT Out Diameter 355.6mm 1626mm Wall Thickness 8 -50mm Length up to 12m Steel Grade API 5L PSL1 / PSL2
Seamless Mediumcarbon Steel Heat Exchanger Tubes Astm A210 / Sa210 Standard
Product Description TORICH ASTM A210/SA210 Seamless Medium Carbon Steel Heat Exchanger Tubes Product Name ASTM A210/SA210 Seamless Medium Carbon Steel Heat Exchanger Tubes Brand TORICH Standard ASTM A210/SA210 Grade 10#, 20#, Q195, Q215, Q235 etc Size OD: 12.7-127mm WT:1-15mm L:1-15m Technic Cold Drawn Condition Normalizing, Annealed Used Boiler and Superheater Tubes Chemical Requirement Grade C Mn P S Si A-1 0.27 0.93 0.035 0.035 0.10 C 0.35 0.29-1.06 0.035 0.035 0
Seamless Stainless Steel Square Tube 2000-12000mm 304 316 Material
Products Description TORICH Seamless&Welded Special Steel Pipe Stainless Steel Square Tube 304 316 Material Standard ASTM, GB, JIS, DIN Matrial 304, 304L, 316, 316L, TP409 Etc Size OD: 8-100mm*8-100mm WT: 1-8mm Length: max 12000mm Production Method Seamless Or Welded Delivery Condition Pickled and Annealed, or as customer's requirement Test and Inspection Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test
T5 Steel Grade Heat Exchanger Tubes For High Temperature Equipment ISO9001
TORICH China Supplier OD19.05mm*WT2.11mm SA213 T5 Seamless Alloy Steel Boiler and Heat Exchanger Tube TORICH China Supplier OD19.05mm*WT2.11mm SA213 T5 Seamless Alloy Steel Boiler and Heat Exchanger Tube PRODUCT DESCRIPTION: Material: 304 304L 316 316L Etc OD: 6-127mm WT: 0.5-12mm Length: 6m Or As Customers' Request Application: For Boiler And Heat Exchange Delivery Condition: Pickled After Heat Treatment Production Method: Code drawn, annealed with nitrogen protection,
