thick wall steel tube
"
JIS G3456 Hot Rolled Seamless Steel Tube Carbon Steel Pipes For High Temperature Service
JIS G3456 Hot Rolled Seamless Steel Tube Carbon Steel Pipes For High Temperature Service Material The JIS G3456 standard specifies the material requirements for hot rolled seamless steel tubes used for high temperature service. The material composition primarily consists of carbon steel. Specification Specification Value Standard JIS G3456 Type Hot rolled seamless steel tube Material Carbon steel Size Range Outer diameter: 15.9mm-139.8mm Wall thickness: 2.6mm-36mm Length
321 302 310S Stainless Steel Welded Steel Tube for Mechanical Structure GB/T 12770
Welded Stainless Steel Tubes for Mechanical Structure GB/T 12770 SPEC: Material:304/304L 316/316L 321 302 310S Size Range:OD:4-1200mm WT:0.3-200mm General Length:2-12m Tolerance: According to the following tables or customers request. Table1Tolerance of OD Classification Nominal OD Permissible Tolerance PC PB PA H T 25 0.20 0.15 0.10 25~40 0.30 0.25 0.20 40~63 0.50 0.30 0.25 63~90 0.60 0.50 0.40 90~159 0.80 0.65 0.50 159~300 0.8%D 0.7%D 0.5%D
Low Carbon Automotive Steel Tubes Small Diameter For Automobiles Brake Tubes
Low Carbon Steel Tube Small Diameter For Automobiles Copper brazed double wall steel tube is made of steel strips which is copper plated on both sides.It has widely applied for automobiles,refrigerators and the other hydraulic system industries. Dimension and specification O.D. mm Thickness mm Weight g/m Assurance pressure kg/cm3 4.76 0.7 70.28 350 6.00 0.7 91.76 350 6.35 0.7 97.75 350 7.00 0.7 108.75 350 7.14 0.7 111.17 350 8.00 0.7 126.31 350 Tolerance O.D. and W.T. +/-0
Low Carbon Seamless Steel Tube Large Diameter Oiled Surface For Fittings
Large Diameter Cold Rolled Seamless Low Carbon Steel Pipe for Fittings Application:Applicable to -45 C grade ~-100 C level cryogenic pressure vessel pipe and low temperature heat exchanger pipe seamless steel Size:L--4-12m OD--30-351mm WT--3-25mm Manufacture method:Steel should be smelted with oxygen converter or electric furnace and added outside the furnace Delivery Condition:Normal delivery Processing methods:Hot rolled (expanding) steel pipe--WH cold drawing (rolling)
Max 24000mm Length JIS G3465 Seamless Mild Steel Tubing
JIS G3465 Seamless Mild Steel Tubing Standards: JIS G3465 Grade: STM-C 540, STM-C 640, STM-R 590, STM-R 690,STM-R 780,STM-R830 Outer Dimensions: 6mm ~ 350mm Wall Thickness: 0.8mm ~ 35mm Length: max 24000mm Application: Steel pipes for low temperature service Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation,
ASTM A513 DOM Steel Tube with Precision Structure 1026 High Yield Strength and Controlled Straightness for Hydraulic Cylinders
ASTM A513 DOM 1010 1020 1026 Mechanical Electric Resistance Welded Steel Pipe Product Overview ASTM A513 DOM steel tubing is a precision mechanical tubing product made from electric-resistance-welded carbon steel tube and then cold drawn over a mandrel to improve dimensional accuracy, wall uniformity, surface finish, and mechanical strength. For buyers specifying 1010, 1020, or 1026, ASTM A513 Type 5 is the correct specification to request when the application requires closer
ASTM A513 DOM Steel Tube with Cold Drawn Precision Dimensional Control for Mechanical Applications
ASTM A513 DOM Steel Tube ERW Cold Drawn Precision Steel Tube ASTM A513 DOM steel tube is a precision mechanical tubing product made by forming strip into ERW tube, welding, and then cold drawing over a mandrel to improve dimensional accuracy, surface consistency, concentricity, and mechanical performance. ASTM A513 covers ERW carbon and alloy steel mechanical tubing in round, square, rectangular, and special shapes, while Type 5 DOM tubing is widely selected where tighter OD
Precision Seamless Steel Tube ASTM A519 / ASME SA519 with 6–450 mm OD and 1020-4140 Steel Grades for Mechanical Engineering
Mechanical Engineer Precision Seamless Steel Tube With Carbon / Alloy Mechanical Engineering Precision Seamless Steel Tube With Carbon / Alloy Steel Mechanical engineering precision seamless steel tubes are supplied for machined parts, shafts, bushings, sleeves, hydraulic components, and structural mechanical assemblies where weld-free tube body, controlled OD/wall size, machinability, heat-treatment response, and stable mechanical properties are required. This product is
SAE J525 ERW/DOM Welded Low-Carbon Steel Tube Annealed for Bending and Flaring in Automotive Industry
SAE J525 ERW / DOM Welded Steel Tube Low Carbon Annealed For Automotive Industry SAE J525 ERW/DOM Welded Low-Carbon Annealed Steel Tube for Automotive Hydraulic Lines SAE J525 ERW/DOM welded steel tube is a normalized, cold-drawn, single-wall low-carbon steel pressure tube designed for automotive fluid-line parts requiring bending, flaring, forming, and brazing. It is a practical choice when the drawing requires tight OD/ID control, good concentricity, a smooth surface, and
