steel mechanical tubing
"
High Quality BS EN 10241 Galvanized Carbon Steel Pipe used in Transportation
High Quality BS EN 10241 Galvanized Carbon Steel Pipe used in Transportation The pipe of the EN10241shall have a smooth surface consistent with the manufacturing process and be free from burrs; surface marks may be ground. Unless otherwise specified in the table below. Repairs by weldiing, other than the weld seam, are forbidden.Welded or seamless steel tubes, forging and rolled bars. It is applicable to those threaded steel pipe fittings that are used in the transportation
Cold Drawn / Cold Rolled Seamless Alloy Steel Tube 34CrMo4 42CrMo4 42CrMo
34CrMo4 42CrMo4 42CrMo Seamless Cold Drawn/Cold Rolled steel tube 34CrMo4: C: 0.30-0.37 Si: 0.40 Mn: 0.40-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo4: C: 0.38-0.45 Si: 0.40 Mn: 0.60-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo: C: 0.38-0.45 Si: 0.17-0.37 Mn: 0.50-0.80 Cr: 0.90-1.20 Mo: 0.15-0.25 Main Characteristics: No Oxidation Layer on the Outer and Inner Walls No Crack under Flaring and Flattening No Leakage under High Pressure No Distortion
Seamless Welded Special Steel Pipe Rectangular Shape Stainless 304 316 Material
Products Description: 304 316 Seamless Welded Stainless Rectangular Steel Pipe Square Tube Steel Grade/Steel Material: Mechanical Requirement Grade: TP304 TP304L TP304LN TP316 TP316L TP316LN TP316LN TPXM-29 TP304N UNS S30400 S30403 S30453 S31600 S31603 S31653 S31653 S24000 S30451 C, max 0.08 0.035 0.035 0.080 0.035 0.035 0.035 0.08 0.080 Mn, max 2.00 2.00 2.00 2.00 2.00 2.00 2.00 11.5-14.5 2.00 P, max 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.060 0.045 S, max 0.030 0.030 0
JIS G3452 Carbon 10.5mm Cold Drawn Seamless Steel Tube
JIS G 3452 Carbon steel pipes for ordinary piping JIS G3452 Carbon Steel Pipes for Ordinary Piping specifies the carbon steel pipe, hereinafter referred to as the "pipes", used for the pipings for conveying steam, water, oil, gas, air, etc. at comparatively low working pressure. CHEMICAL COMPOSITION unit (%) Steel grade P S SGP 0.040max 0.040max Note: Special steel grade is also available, according to customer request. MECHANICAL PROPERTIES Steel grade Tensile strength Mpa
Copper Nickel Enhanced Evaporation U 125MPa Alloy Steel Pipe
TORICH ASTM B111 C71500 Copper Nickel Alloy Steel Enhanced Evaparation U Tube This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 3-1/8" in (80mm) inclusive, in diameter, for use in surface condenser, evaporators, and heat exchangers. The following coppers and copper alloys are apecified. Type: Copper Alloy Steel U Tube Application: For Enhanced Evaparation, Heat Exchanger, Boiler, and Condenser
Cold Drawn Seamless Stainless Steel Pipe ASTM A270 For Boiler Heat Exchangers
Stainless Steel and Pipe Cold Drawn Seamless Pipe ASTM A270 For Boiler Heat Exchangers Material The material used for cold drawn seamless pipes, specifically for boiler heat exchangers, conforms to the ASTM A270 standard. The ASTM A270 specification covers seamless and welded austenitic and ferritic/austenitic stainless steel sanitary tubing for general service. Specification The specification for the cold drawn seamless pipes, as per ASTM A270, includes the following key
GB/T 31937 L245J/BJ SAWL Carbon Welded Steel Pipe For Pipeline Of Coal Slurry
GB/T 31937 L245J/BJ L290J/X42J L320J/X46J L360J/X52J L390J/X56J SAWL Carbon Welded Steel Pipe For Pipeline Of Coal Slurry Introduction The GB/T 31937 standard specifies the requirements for L245J/BJ, L290J/X42J, L320J/X46J, L360J/X52J, and L390J/X56J carbon welded steel pipes used in the construction of pipelines for coal slurry transportation. This article provides an overview of the material, specification, chemical composition, mechanical properties, and application of
ASTM A928 S31200 Duplex Stainless Steel Pipe Electric Fusion Welded With Addition Of Ffiler Metal
ASTM A928 S31200 S31260 S31500 S31803 S32003 Duplex Stainless Steel Pipe Electric Fusion Welded With Addition Of Filler Metal Introduction ASTM A928 is a specification for electric fusion welded duplex stainless steel pipe with the addition of filler metal. This specification covers various grades of duplex stainless steel, including S31200, S31260, S31500, S31803, and S32003. These pipes are widely used in various industries due to their excellent corrosion resistance, high
ASTM A358 304 Stainless Steel Pipe Electric Fusion Welded Stainless Steel Pipe For High Temperature Service
ASTM A358 304 Stainless Steel Pipe: Electric Fusion Welded Stainless Steel Pipe For High Temperature Service Introduction ASTM A358 304 stainless steel pipe is an electric fusion welded stainless steel pipe designed for high temperature service. It is widely used in various industries due to its excellent corrosion resistance, high strength, and durability. This article provides an overview of the material, specification, key features, chemical composition, mechanical
