stainless tube steel
"
SAE J524 Seamless Low Carbon Seamless Steel Tube Annealed for Bending / Flaring
SAE J524 Seamless Low Carbon Seamless Steel Tube Annealed for Bending / Flaring Standard: SAE J524 Seamless Low Carbon Steel Tubing Annealed for Bending and Flaring Applications: for Bending and Flaring to auto parts Size range: O.D.:6-88.9mm W.T.:1-15mm L: According to customer Order Table 1- TUBING OUTSIDE DIAMETER TOLERANCE Nominal Tubing OD mm Tolerance mm Up to 25.4 0.10 Over 25.4 to 38.1 inclusive 0.15 Over 38.1 to 50.8 inclusive 0.20 Over 50.8 to 88.9 inclusive 0.25
ASTM A335 Round Ferritic Alloy Steel Tubes / Pipe For Heat - Exchangers
ASTM A335 Steel Ferritic Alloy Tubes Pipe for High-Temperature and Boilers ASTM A335 Seamless ferritic and alloy steel pipe for high temperature service Applications: for Boilers,Superheaters,Heat-Exchangers Size range: O.D.:6-420mm W.T.:1-50mm L: according to customer requirement Steel Grade and Chemical Compositions: Steel Grade C Mn P S Si Cr Mo max max max max max min P5 0.15 0.30-0.60 0.025 0.025 0.50 4.00-6.00 0.45-0.65 P9 0.15 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.00
BS 3059 Gr 360 Carbon Steel Heat Exchanger Tubes , Hot Finished Seamless Tube
BS 3059 Gr 360 Carbon Steel Heat Exchanger Tubes for Steel Boiler and Superheater Tubes Product Name:BS 3059 Steel boiler and superheater tubes Carbon ,alloy and austenitic stainless steel tubes with specified elevated temperature properties Size Diameter 5-420mm Wall thickness 0.5-50mm Length Upon request Application : for boiler and superheater Produce method: seamless ,welded Delivery condition: hot finished, cold finished CHEMICAL COMPOSITION % max Steel Grade C Si Mn P S
Low Carbon Seamless Steel Tube DIN 1629 St37.0 Non - Alloyed Steel Pipe
Low Carbon Seamless Steel Tube DIN 1629 St37.0 Non-alloyed Steel Pipe Standard: DIN 1629 Seamless circular unalloyed steel tubes subject to special requirements Applications: used in construction of chemical plant,vessels,pipework and for general mechanical engineering purposes. Production Method: Seamless Cold Drawn/Rolling or Hot Rolling Size range: O.D.:20-660mm W.T.:1-60mm L:max12000mm Steel Grade and Chemical Compositions: Steel grade Type of deoxidization (R, killed
DIN 2460 Seamless Steel Tube Welded Steel Pipe For Water Pipelines Construction
DIN 2460 Welded Steel Pipe for the Construction of Water Pipelines DIN 2460 Welded Steel Pipe for the Construction of Water Pipelines DIN 2460 Standard applies to welded and seamless types of steel pipes ready for laying, for the connection of water piipelines. The pipe follow the DIN2460 standard especially designed for use in connection with pipes for drinking water pipelines. Nonethelss, it is also applicable to the construction inside building. Place of Origin: Zhejiang
EN 10208 Standard Welded Steel Tube / Welded Steel Pipe For Pipelines ISO
EN 10208 Standard Steel Pipe for pipelines for combustible fluids The process by which a flat product is formed into a pipe without heating of the plate or strip.Cold working operation with a permanent strain greater than the maximum strain of 1.5% which differentiates it from sizing operations specified in table. For seamless pipe, the entire pipe; for welded pipes, the entire pipe excluding weld(S) and heat affected zone (HAZ) Normalizing forming Forming process in which
Seamless Steel Tubes for Low and Medium Pressure Boiler GB 3087
Seamless Steel Tubes for Low and Medium Pressure Boiler GB 3087 Spec: Material:10# 20# STB33/42 st35.8 Size Range:OD:4-1200mm WT:0.3-200mm General Length:4-12.5m Tolerance: According to the following tables or customers request. Tolerance of the OD &WT: OD Tolerance: Production Method OD Tolerance Hot Rolling(Extrusion) 1% or 0.50mm Cold Drawn(Cold Rolled) 1% or 0.30mm Tolerance for wall thickness: 1.Wall thickness tolerance of Hot Rolling steel tube: Production Method
GB18248 34CrMo4 30CrMnSiA Seamless Steel Tubes For Gas Cylinder
GB18248 34CrMo4 30CrMnSiA Seamless Steel Tubes for Gas Cylinder Products Description: GB18248 34CrMo4 30CrMnSiA Seamless Steel Tubes for Gas Cylinder Well-finished inside and outside surface. Alloy Steel tubes and pipes. Standard: GB18248 JIS G3429 Applications: for High Pressure Gas Cylinder Size Range: OD: 5-420mm WT: 0.5-50mm Length:4-12m Relevant standard: KS D3573 The Steel Refining Method: The steel is Killed steel refined in electric furance or oxygen converter. The
Seamless Straightness Steel Tubes for Drilling GB/T 9808 37SiMn 38CrMoAl
Good Straightness Seamless Steel Tubes for Drilling GB/T 9808 37SiMn 38CrMoAl Spec:Material:37SiMn 38CrMoAlSize Range:OD:6-95mm WT:1-10mm General Length:4-12m Chemical CompositonCHEMICAL COMPOSITION % maxPS0.0300.030 Tolerance of Outer Diameter and Wall ThicknessStandardProduction MethodTube Size ToleranceGB/T 9808-2008Hot rolledOD(+1.0%D) or +0.65(-0.5%D) -0.35WT10(+15%S)or +0.45(-10%S) -0.35>10(+12.5%S, -10%S)Cold Drawn(rolled)OD 0.50%D or 0.20WT 8%S or 0.15Q(N)/ T118
