stainless tube steel
"
ASTM B677 UNS N8904 Nickel Alloy Stainless Steel Seamless Tube UNS N08925
Seamless, Cold-worked or Hot-finished pipe and tube intended for general corrosive service. Steel Grade: UNS N08904,UNS N08925,and UNS N08926 Materials and Manufacture: The material is supplied in the solution-treated condition Tests: Chemical Analysis - One test per lot Machanical Properties - One test per lot Non-destructive Test - Each Piece in each lot Average Diameter: The average if the maximum and minimum outside diameters as determined at any one cross section of the
DIN17458 Seamless 3 Inch Stainless Steel Tubes With X5 CrNi18 10
DIN17458 Seamless Circular Austenitic Stainless Steel Tubes subject to special requirements for construction of pressure vessel,chemical plant and pipework Minimum Order Quantity: 5MT Payment Terms: T/T or L/C Delivery Time: FOB,CFR,CIF are workable 30-60days according detail PO quantity TABLE 1 Amounts by which the chemical composition in the product analysis may deviate from the limit values specified for the cast analysis Element Limit values specified for the cast
ASTM A179 Cold-Drawn Low-Carbon Seamless Steel Tube for Heat-Exchanger and Condenser
ASTM A179 Cold-Drawn Low-Carbon Seamless Steel Tube for Heat-Exchanger and Condenser is widely used for Marine boiler and superheater and , pressure piping with seamless steel tube manufacturing. This kinds of steel pipe is made by material of 320/360/410/460/490 according to the GB/T 5312 standard. Size: Outer Diameter: 6-1000 mm,Wall Thickness: 1- 80 mm,Length :1-12m or as your request Application:Manufacture of boilers or superheater. Material:10#.20#.16Mn.A106(B,C)
321 302 310S Stainless Steel Welded Steel Tube for Mechanical Structure GB/T 12770
Welded Stainless Steel Tubes for Mechanical Structure GB/T 12770 SPEC: Material:304/304L 316/316L 321 302 310S Size Range:OD:4-1200mm WT:0.3-200mm General Length:2-12m Tolerance: According to the following tables or customers request. Table1Tolerance of OD Classification Nominal OD Permissible Tolerance PC PB PA H T 25 0.20 0.15 0.10 25~40 0.30 0.25 0.20 40~63 0.50 0.30 0.25 63~90 0.60 0.50 0.40 90~159 0.80 0.65 0.50 159~300 0.8%D 0.7%D 0.5%D
GB/T18704 Q195 Q235 12Cr18Ni9 Stainless Steel Clad Pipes OD 12.7mm - 325mm
Product Name:TORICH GB/T18704 Q195 Q235 12Cr18Ni9 Stainless Steel Clad Pipes for Structural PurposesStandard: GB/T18704OD: 12.7 - 325 mm WT: 0.8 - 12 mm Length: 1-8m or according to customers' actual application and production.Application:public facilities. Vehicle and ship manufacturing. Road guardrail. Furniture. Medical apparatus and instrumentsSteel Grade:Q195 Q235 06Cr19Ni10 12Cr18Ni9 12Cr18Mn9Ni5N 12Cr17Mn6Ni5NTechnology: Continuous welding molding Tolerance of
GB/T 12771 Dia 4-1200mm Welded 304/304L 316/316L Stainless Steel Pipes for Liquid Transpotation
GB/T 12771 Diameter 4-1200mm Welded 304/304L 316/316L Stainless Steel Pipes for Liquid Transpotation Product Name: Welded Stainless Steel Pipes for Liquid Service GB/T 12771 SPEC: Material:304/304L 316/316L Diameter : 4-1200mm Wall thickness : 0.3-200mm Length : 2-12m Upon customer's request Tolerance: According to the following tables or customers request. Table 1 Tolerance of OD Classification D Permissible Tolerance A B H All Dimensions 0.5% or 0.20 0.75% or 0.30 T
Astm A312 Polished Stainless Steel Pipe Seamless Heavily Cold Worked
TORICH ASTM A312 Seamless Heavily Cold Worked Austenitic Stainless Steel Pipe TORICH ASTMA312 Seamless Heavily Cold Worked Austenitic Stainless SteelPipe Standard: ASTM A312, ASTM A262, ASTM A370, ASTM A941, ASTM A999/A999M, ASTM A1016/A1016M, E112, E381, ANSI B1.20.1, B36.10, B36.19, AWS A5.9, SAE J1086 Material: TP304H, TP304H, TP309HCb, TP310H, TP310HCb, TP316H, TP347H, TP348H OD: 10.29-762.0mm WT: 1.24-12.7mm Usage: This standard covers seamless austenitic stainless steel
Gb/t 8163 Stainless Steel Seamless Tube Cold Drawn / Hot Rolled For Liquid Service
Seamless Steel Tubes,Cold Drawn or Hot Rolled,GB/T 8163,for Liquid Service,TORICH SPEC: Material:Q295 Q345 10# 20# Q390,Q420,Q460 Size Range OD:4-1200mm WT:0.3-200mm General Length:3-12.5m Tolerance: According to the following tables or customers request. Tolerance of the OD &WT: OD Tolerance: Production Method OD Tolerance Hot Rolling(Extrusion) 1% or 0.50mm Cold Drawn(Cold Rolled) 1% or 0.30mm Tolerance for wall thickness: 1.Wall thickness tolerance of Hot Rolling
Annealed Seamless Heat Exchanger Tubes ASME SA179 L G Finned Aluminum Tubing
Products Description: Carbon Steel Tube ASME SA179 Aluminum L G Finned Tube for Heat Exchange Steel Grade/Steel Material: 1. Standard: ASTM A178, ASTM A179, ASTM A192, ASME SA213, ASTM A106 etc 2. Fin Material: Aluminum, Copper Alloy, Stainless Steel, Carbon Steel Finned: Extruded fin, Spiral fin, Embeded G fin, Low fin, H fin, L fin etc Items General Materials Core Tube Material Carbon steel, low-alloy steel, stainless steel, brass, copper, cooper-nickel alloys, aluminum
