DIN17458 Seamless 3 Inch Stainless Steel Tubes With X5 CrNi18 10
Product Details
stainless steel round tube
,large diameter stainless steel tube
DIN17458 Seamless Circular Austenitic Stainless Steel Tubes subject to special requirements for construction of pressure vessel,chemical plant and pipework
Minimum Order Quantity: 5MT
Payment Terms: T/T or L/C
Delivery Time: FOB,CFR,CIF are workable
30-60days according detail PO quantity
TABLE 1 Amounts by which the chemical composition in the product analysis may deviate from the limit values specified for the cast analysis
| Element | Limit values specified for the cast analysis as in table 1 % by mass | Permissible deviations① % by mass |
| Carbon C | ≤0.030 ＞0.030 ≤0.08 | ﹢0.005 ﹢0.01 |
| Silicon(Si) | ≤1.0 | ﹢0.05 |
| Manganese(Mn) | ≤2.0 | ﹢0.04 |
| Phosphorus(P) | ≤0.045 | ﹢0.005 |
| Sulfur(S) | ≤0.030 | ﹢0.005 |
| Nitrogen(N) | ≤0.22 | ±0.01 |
| Chromium(Cr) | ≥16.5 ≤20.0 | ±0.20 |
| Molybdenum(Mo) | ≥2.0 ≤5.0 | ±0.10 |
| Nickel(Ni) | ≥8.5 ＜10.0 ≥10.0 ≤15.0 | ±0.10 ±0.15 |
| Niobium(Nb) | ≤1.00 | ±0.05 |
| Titanium(Ti) | ≤0.80 | ±0.05 |
①If several product analyses are carried out for a single cast and if these elements show contents for a single element outside the range specified for the cast analysis,this content shall either exceed the permissible maximum content or be below the permissible minium content,but not both at the same time for one cast.
-
Auto Parts ASTM A513 Cold Rolling Welded Steel Tubes with DOM Production
Auto Parts ASTM A513 Welded Steel Tubes with DOM production ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Applications: for Machinery, Mechanical Engineering 1. Standard: ASTM A513 cold rolling welded precision steel tubes 2. Steel Grade: SAE1010, SAE1020, other materials upon agreement with customers. 3. Production method: Cold rolling on the weled steel tubes, to reach high accuracy on the OD and WT tolerance 4. Size range: O.D.:6-350mm W.T. -
25mm Diameter Bright Annealing Seamless Steel Tube for Hydraulic Systems
EN10305-1 E235 E355 NBK Bright Annealing Precision Steel Pipes for Hydraulic Systems EN10305-1 NBK Bright Annealed Precision steel pipes for Hydraulic system OD:4-80 (mm) WT0.5-10 (mm) Length 1000-12000mm Product name: Seamless Precision Steel Pipe Application: for hydraulic systems precision steel pipes for Hydraulic system OD (mm) WT (mm) Length (mm) 4 0.5 5800-6000 4.0 1.0 5800-6000 5.0 1.0 5800-6000 6.0 1.0 5800-6000 6.0 1.5 5800-6000 8.0 1.0 5800-6000 9.5 0.89 5800-6000 -
Precision Seamless Black Phosphating Steel Tube for Hydraulic Systems
Steel Pipes with high precision for Hydraulic Systems with Black Phosphating surface Black Phosphated Hydraulic Tubes with High Precision and tight tolerance, the tubes are produced by precision cold drawn and cold rolling, then bright annealed in a protected atmosphere, afterwards it is blackphosphated on the surface Production process: DIN series tubes, cold drawn and bright annealed precision seamless steel tube is used as the tube to be phosphated. The phosphorization is -
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37 Production Process: Cold rolling by Cold pilger machine and Cold rolling machine,galvanized and zinc plated could be applied. Cold Rolled and Galvanized Steel Tube Production process: DIN highly accurate, cold rolled and bright seamless steel tube is used as the tube to be galvanized. The outer wall of tube is electroplated. The caps are covered at two ends of tube to prevent from the dust. Main Features:
