stainless steel round tube
"
Round Shape Stainless Steel Seamless Pipe Titanium Alloy For Condenser
TORICH Seamless Titanium and Titanium Alloy Tubes for Condenser and Heater-Exchangers TORICH Seamless Titanium and Titanium Alloy Tubes for Condenser and Heater-Exchangers Standard: GB/T3624, GB/T3625, ASTM B338/ASME SB338, ASTM B861/ASME SB861, DIN17861 Size range: OD: 10-80mm WT: 0.5-4.5mm Length: 15m max Material: TA1, TA2, TA3, TA9, TA10 Usage: Condenser and Heater-Exchangers Chemical Composition% Grade N max C max H max Fe max O max Residual Al V Pd Mo Cr Si max S max Mn
Bright Finished Polished 4130 4140 42CrMo4 QT Hydraulic Ck45 C45E Hard Chrome Round Bar/Steel Bar/Piston Rod
TORICH bright finished polished 4130 4140 42CrMo4 QT Hydraulic Ck45 C45E Hard chrome round bar/steel bar/piston rod Quick detail: OD: 6-300mm Length:1-9m Material:CK45/ST52/20MnV6/42CrMo/40Cr/Bearing steel/stainless steel/4140 4130 45# 1045 S45C GCr15 Chrome thickness :20-30 micron Hardness of the chrome layer:800HV(min) Heat treatment: QT Annealing Straight:0.2/1000mm Surface roughness:Ra 0.2 micron(max) Surface coating: Hard chromed Tolerance f7 Yield Strength:350Mpa
GB/T9808 STM-R780 High Straightness Seamless Cold Drawn Steel Tube For Drilling
GB/T9808 STM-R780 High Straightness Seamless Steel Tubes for Drilling our products apply to geological core drilling,water well drilling,hydrogeoligical drill,casing material for engineering drilling,core tube material and casing coupling Seamless Steel Tubes,ordinary drill pipe material and drill pipe joint Seamless Steel Tubes,rope coring drill pipe material and drill pipe joint Seammless Steel Tubes,drill collar material and drill collar lock joint Seamless Steel Tubes.
Cold Drawn Seamless Carbon Steel Tube For Heat Exchanger And Condenser
ASTM A179 Seamless Cold Drawn Low Carbon Steel Heat Exchanger Tubes and Condenser Tubes Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger Tubes and Condenser Tubes Applications: For Boilers, Superheaters, Tubular Heat-Exchangers, Condensers Heat transfer apparatus U bend Tubes according to Customer request Material: Low Carbon Steel Production: Seamless Cold Drawn Size range: O.D.:3.2-76.2mm W.T.:1-15mm L: according to customer requirement. Steel Grade and Chemical
Din En 10297 Seamless Steel Tube Mechanical With Black Painted Surface
TORICH DIN EN 10297 Seamless Steel Tubes for Mechanical Application Product Description: OD: 6-813 mm WT: 0.5-100mm Length: 1-12m Material: 10#, 20#, 45#, 16Mn, Q195, Q235, Q345 Delivery condition: - Fine Grain Steel: Steel having an austenitic/ferritc grain size equal to or finer than 6 when measured in accordance with EURONORM103 - Normalizing Rolling: A rolling process in which the final deformation is carried out in a certain temperature range leading to a material
Astm A106 Seamless Metal Tubes , Black Painted Carbon Seamless Steel Pipe
ASTM A106 Seamless Carbon Steel Pipe for High-Temperature Service This covers seamless carbon steel pipe forhigh-temperature service in NPS !/8 to NPS 48 [DN 6 ItoDN 1200] inclusive, with nominal (average) wallthickness as given in ASME B 36.10M. It shall be permissibleto furnish pipe having other dimensions provided such pipecomplies with all other requirements of this specification. Pipeordered under this specification shall be suitable for bending,flanging, and similar
Astm A321 Hot Rolled Steel Tube , Quenched Tempered Carbon Steel Bar 6.35 - 241.3mm
ASTM A321 Hot-rolled,quenched,and Tempered Carbon Steel Bars 6.35-241.3mm Out Diameter 1. Scope This specification covers hot-rolled, quenched, and tem-pered carbon steel bars, of the following sections and sizeranges: 1)Rounds, '% to 9/ in. (6.35 to 241.3 mm) incl, indiameter. 2)Squares, '/4 to 5/ in. (6.35 to 139.7 mm) incl,between parallel surfaces. 3)Hexagons, '/4 in. (6.35 mm) and over betweenparallel surfaces. The values stated in inch-pound units are to be regardedas
TORICH 1045/1020 Cold Drawn Seamless Steel Tube for Nuts
TORICH 1045/1020 Cutting Cold Drawn Seamless Steel Tube Used for Manufacturing Nuts Standard: ASTM A519, Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions Non-alloy and alloy steel tubes Application: for seamless circular tubes made of non-alloy and alloy steels for mechanical and gneral engineering purposes. Size range: O.D.: 5-420mm W.T.: 0.5-50mm L:max12000mm Material: 1008,1010,1020,1026,1045,4130,4140, E235,
Seamless T5 Heat ExchangerASTM A213 T11 Steel Tube Pipe Annealed
TORICH T12 T5 T22 Condenser Heat Exchanger ASTM A213 Steel Tube Pipe Standard:SA213 Grade: T5 T12 T11 T22 Type: Seamless Apolication: Boiler heat exchanegr condenser Delivery time: 30-60 days according to quantity Payment : 30% T/T in advance, 70% paied before shipment 1.Chemical components: C Mn P S Si Cr Mo T5 0.15 0.3-0.6 0.025 0.025 0.5 4-6 0.45-0.65 T11 0.05-0.15 0.3-0.6 0.025 0.025 0.5-1 1-1.5 0.44-0.65 T12 0.05-0.15 0.3-0.61 0.025 0.025 0.5 0.8-1.25 0.44-0.65 T22
