seamless steel pipe
"
Welded Hot Rolled Steel Tube GB/T 21832 Ss Seamless Pipe For Liquid Delivery
Products Description TORICH GB/T 21832 Austenitic-Ferritic Grade Welded Stainless Steel Hydraulic Cylinder Tube Standard GB/T 21832 Matrial UNS 329J3L Size OD: 4-1200mm; WT: 0.3-200mm; Length: 1.5-6m Production Method Single-sided or double-sided automatic arc welding Delivery Condition Pickled after heat treatment Application Pressure equipment, liquid delivery and heat exchanger Test and Inspection Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test,
C68700 C71500 Alloy U Bend Tubes ASTM B111 Cold Drawn Seamless Copper
Products Description TORICH ASTM B111 Cold Drawn Seamless Copper Alloy U Bending Tubes C68700 C71500 Key Word Seamless Mechanical Tube Material ASTM B111 Production method Cold Drawn + Bending General size OD: 19.05, 25 ,12.7;WT: 1.65 ,1.245 ,2.11 Application Heat Exchanger, Condenser, Superheater etc Chemical Requirement Steel Grade C4430 C4440 C4450 C68700 C71500 Cu 70.0-73.0 70.0-73.0 70.0-73.0 76.0-79.0 remainder Tin 0.9-1.2 0.9-1.2 0.9-1.2 - - Al - - - 1.8-2.5 - Ni, incl
ASTM A554 Stainless Steel Welded Pipe / Square Steel Tubing For Mechanical
ASTM A554 Welded Stainless Square Steel Tube for Mechanical 304 316 As-welded or cold-reduced mechanical tubing. Shapes: Round, Square, Rectangle, or special. Dimension: OD 406.4mm WT 0.51mm Grade: MT-301, MT-302, MT-304, MT-309S MT-310S, MT-316, MT-316L, MT-317 MT-321, MT-347, MT-430, MT-430i Materials and Manufacture: The tubes are manufactured from flat-rolled steel by automatic welding process. Delivery Condition: 1. As welded 2. Welded and annealed 3. Cold reduced 4.
Plain End Protector Stainless Steel Seamless Pipe With ASTM A269 Standard
ASTM A269 TP304/304L TP316/316L TP310 Seamless Stainless Steel Tube Size range: I.D.6.4mm W.T. 0.51mm L: according to customer requirement Steel Grade and Chemical Compositions: ASTM / UNS C (max) Si (max) Mn (max) P (max) S (max) Cr Ni Mo Ti TP304 / S30400 0.080 1.00 2.00 0.045 0.03 18.0-20.0 8.0-10.5 TP304L / S30403 0.035 1.00 2.00 0.045 0.03 18.0-20.0 8.0-13.0 TP304H / S30409 0.04-0.10 1.00 2.00 0.045 0.03 18.0-20.0 8.0-11.0 TP316 / S31600 0.080 1.00 2.00 0.045 0.03 16.0
ASTM B111 C71500 Steel U Tube For Boiler
TORICH ASTM B111 C71500 Copper Nickel Alloy Steel U Tube for Boiler This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 3-1/8" in (80mm) inclusive, in diameter, for use in surface condenser, evaporators, and heat exchangers. The following coppers and copper alloys are apecified. Type: Copper Alloy Steel U Tube Application: For Heat Exchanger, Boiler, and Condenser Technique: Cold Drawn Material: C71500
Ss304 Seamless Cold Drawn Hydraulic Cylinder Honed Tube
Hydraulic Cylinder using 304 Stainless Seamless Cold Drawn Steel Honed Tube Standard: EN10305-1 Steel Grade: E 235 E355 Etc Material: Carbon And Alloy Steel Grade I.D.: 40-400mm W.T.: 5mm Technique: Cold Draw Material:304 316 ect stainless steel. Place Of Origin: Zhejiang, China (Mainland) Surface Treatment: As Customer's Required Length: 3m Straightness:0.5/1000mm Tolerance of OD:0 -0.05 +0.05 Tolerance of ID:+0--0.03,+0.03--0.05,+0.05--0.10 Inside surface smooth finish:0.2
DIN2462 Stainless Steel Tubing For Planar Sputtering Target
Torich 133*4*4113mm 304L Planar Sputtering Target Sputtering Target Stainless Steel Tube Torich 133*4*4113mm 304L Sputtering Target Stainless Steel Tube Grade:304L Specification: 133*4*4113mm Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness deviation0.10mm Straightness deviation: Overall length direction0.5mm Standard:DIN2462 Special requirements: 1. Quality requirements: Tolerance of OD:0.1-0.4mm Tolerance of ID
0.4mm OD 304L Stainless Steel Tubing For Alloy Sputtering
Torich 133*4*4113mm 304L Alloy Sputtering Sputtering Target Stainless Steel Tube Grade:304L Specification: 133*4*4113mm Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness deviation0.10mm Straightness deviation: Overall length direction0.5mm Standard:DIN2462 Special requirements: 1. Quality requirements: Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness
Seamless Coiled Stainless 201 Precision Steel Tube
High Quality Stainless Steel Seamless Coiled Tubes Standard ASTM, ASME,EN, JIS, DIN,GB/T etc Material Grade 304(0Cr18Ni9) 304L(00Cr18Ni10) 316(0Cr17Ni12Mo2) 316L(0Cr17Ni14Mo2) 321, 409, 409L, 430 Diameter a) Outer Diameter: 0.1mm-80.mm b) Wall Thickness: 0.05mm-2.0mm c) Length: 500mm Or in coil Tolerance a) Outer Diameter: +/- 0.01mm b) Thickness: +/- 0.01mm c) Length: +/- 0.1mm Surface Treatment Polishing,Annealing, Mirro surface, Bright, Pickling Application medical
