seamless carbon steel tube
"
254Smo F51 F52 OD6.25mm Stainless Steel Welded Pipe
Torich 254Smo/ F51 / F52 Super Duplex Stainless Welded Steel Pipe Type: Stainless, Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: welded Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6.
Torich Incoloy 909 Stainless Steel Flat Bar Nickel Base Alloy
Torich Incoloy 909 Stainless Steel Flat Bar Nickel Base Alloy 1.Introduction INCOLOY alloy 909 (UNS N19909) is a nickel-ironcobalt alloy whose outstanding characteristics are a constant low coefficient of thermal expansion, a constant modulus of elasticity, and high strength. The alloy is strengthened by a precipitation-hardening heat treatment made possible by additions of niobium and titanium. The chemical composition of INCOLOY alloy 909 is given in Table 1. The
2inch 304 304h stainless steel pipe
2inch 304 304h stainless steel pipe 304 Stainless Steel Pipe is most suited for applications where superior strength and excellent corrosion resistance is required. 304 / 304L stainless steel seamless pipes are widely accepted in food processing, water treatment, petrochemical, diary, and chemical industries for moving fluids and gases. Welded 304 / 304L stainless steel tube/pipe is ideally used for posts, and poles as well as handrails, in exterior and marine applications.
2inch 304 304h stainless steel pipe
2inch 304 304h stainless steel pipe 304 Stainless Steel Pipe is most suited for applications where superior strength and excellent corrosion resistance is required. 304 / 304L stainless steel seamless pipes are widely accepted in food processing, water treatment, petrochemical, diary, and chemical industries for moving fluids and gases. Welded 304 / 304L stainless steel tube/pipe is ideally used for posts, and poles as well as handrails, in exterior and marine applications.
6mm Od 2mm Id St37 Carbon Seamless Pipe For Fuel Injection
6MM OD FUEL INJECTION PIPE SEAMLESS CARBON THICK WALL 2MM ID ST37 STEEL PIPE ST37.4 Carbon Seamless Steel Pipe Tube Chemical Composition(%) Mechanical Property C Si Mn S P Cr Ni Cu Mo Yield Strength Tensile Strength ( s ) ( b ) 0.08~0.13 0.15-0.35 0.30~0.60 0.050 0.040 0.20 0.25 0.25 - 205(21) (MPa) 335(35) (MPa) End Shape Beveled end, plain end, vanished, or adding plastic caps to protect the two ends as per customer's requirements Surface Oiled, Galvanized,
Corrosion Resistant Crimped Fin Tube with Enhanced Air-Side Performance and Reliable Mechanical Bond for Air Coolers
Crimped Fin Tube (Helically Tension Wound, Cold-Formed Finned Tube) for Air Coolers Material A Crimped Fin Tube (also called a Spiral Tension Wound / Cold-Formed Finned Tube ) is a heat-transfer tube where a metal fin strip is helically wound under controlled tension onto a base tube . The fin strip is pre-formed to widen the contact foot, then mechanically locked to the tube surface (with end fixing such as tack/tag welding or spot welding depending on design). Common
ASTM A312 TP317L Stainless Steel Precision Seamless Pipe with Enhanced Chloride Corrosion Resistance and Low Carbon Weld Integrity
ASTM A312 TP317L Stainless Steel Precision Seamless Pipe (Austenitic) Material Overview ASTM A312 TP317L is a low-carbon, molybdenum-alloyed austenitic stainless steel seamless pipe designed for high-temperature and general corrosive service . It is typically selected when 316L is not sufficient for chloride-bearing or acidic environments, thanks to its higher Mo and Ni content and improved pitting/crevice corrosion resistance. Specifications Product type: Precision seamless
Hex Shape Special Steel Pipe GB/T 3094 / Hex Tubing Steel Plain End
Hex & Special Shapes Specialty Tubing/steel hex tubing Material :Carbon steel+Stainless steel Shape:Outside hexagonal steel tubes, intside round steel tubes other shape: Ellipse oval steel tubes Special shapes seamless steel tubes Rectangle steel tubes Outside Hexagonal Inside Round Seamless Steel Tubes Both inside and outside are Hexagonal Shape Special shapes of seamless steel tubes according to customers' drawings or detail requirement Production method:Cold drawn Keywords
ASTM B829 Monel 400 Nickel Alloys Seamless Pipe For General Requirements
ASTM B829 Monel 400 Incoloy 625 Nickel Alloy Pipe: Nickel Alloys Seamless Pipe for General Requirements Material Specification ASTM B829 is a standard specification for nickel alloys, specifically focusing on seamless pipes. This specification covers Monel 400 and Incoloy 625, which are renowned for their excellent corrosion resistance and mechanical properties. These alloys are commonly used in industries where high performance and durability are required. Key Features
