rectangular steel pipe
"
ASME SA213 Grade T12 Internal Thread Seamless Low-Alloy Heat Exchanger Tube with Cr-Mo Design and 30-325 mm OD
ASME SA213 Grade T12 Internal Thread Tube Seamless Low-Alloy Tube for Heat Exchangers Material Overview ASME SA213 Grade T12 (UNS K11562) is a seamless chromiummolybdenum (Cr-Mo) low-alloy steel tube widely specified for boiler, superheater, and heat-exchanger service where elevated-temperature strength and pressure integrity are required. The ASME SA-213 specification is the Code adoption of ASTM A213/A213M for these seamless alloy-steel tubing applications. Specification
Corrosion Resistant Crimped Fin Tube with Enhanced Air-Side Performance and Reliable Mechanical Bond for Air Coolers
Crimped Fin Tube (Helically Tension Wound, Cold-Formed Finned Tube) for Air Coolers Material A Crimped Fin Tube (also called a Spiral Tension Wound / Cold-Formed Finned Tube ) is a heat-transfer tube where a metal fin strip is helically wound under controlled tension onto a base tube . The fin strip is pre-formed to widen the contact foot, then mechanically locked to the tube surface (with end fixing such as tack/tag welding or spot welding depending on design). Common
SA178a Annealed ASTM A178 ERW Heat Exchanger Tubes
ASTM A178 ERW Carbon Steel Boiler and Suoer Heater Tubes Product Description: ASTM A178 is a specification which covers standards for electric resistance welded tubes, which are abbreviated as ERW SA178 Boiler Tube. These ASTM specified SA178a Boiler Tubes are produced with a minimum wall thickness made from carbon steel alloys as well as carbon- manganese steel. This ASTM SA178 Grade A Electric-Resistance Welded Carbon Steel Boiler Tubes are designed to be used in boiler
Overlapped L Type Fin Tube Carbon LL Type Finned Tube with Helically Wound Fins and High Thermal Conductivity for Heat Exchangers
Overlapped L Type Fin Tube Carbon LL Type Finned Tube for Heat Exchanger Product Overview Overlapped L type fin tube, also called LL type finned tube or LL-foot fin tube, is a tension-wound finned tube where L-shaped fins are helically wrapped around a carbon steel base tube and each fin foot overlaps the previous one. This creates a double L foot that completely jackets the outer surface of the tube. For carbon LL type fin tubes, the base tube is typically seamless low- or
Aluminum L-Foot Tension Wound L-Type Fin Tube for Corrosion Resistant Heat Exchangers
L-Type Fin Tube Aluminum L-Foot Tension Wound Finned Tubes for Heat Exchanger Material Overview Aluminum L-foot tension wound finned tubes are bi-metallic or multi-metallic heat transfer elements in which a thin aluminum strip is helically wound around a base tube under controlled tension. An L-shaped foot is first formed on one edge of the fin strip; this foot bears directly on the outer surface of the tube and mechanically locks the fin to the tube along its full length
ASTM B75 C12200 Cold Drawn Seamless Copper Alloy Tube for Steam Tracing Applications
ASTM B75 C12200 Copper Alloy Tube High-Quality Copper Alloy Tubes For Steam Tracing Material Description ASTM B75 C12200 copper alloy tube is a seamless, cold-drawn phosphorus-deoxidized copper (Cu-DHP) tube designed for general engineering service and particularly well suited for steam tracing and low- to medium-temperature steam lines. The alloy (UNS C12200 / Cu-DHP) combines: Very high copper purity (99.9% Cu including Ag) with 0.0150.040% phosphorus as a deoxidizer,
Continuously Welded Helical Finned Tube with 30-325 mm Outer Diameter and 6M or Custom Length for Boiler Economizers
Helical Finned Tube Continuously Welded Spiral ND Steel Fin Tube for Boiler Economizers Material A high-frequency resistance welded helical/spiral finned tube produced with an ND steel (09CrCuSb) base tube and optional ND/carbon/stainless fin strip. ND steel is a CuSbCralloyed low-alloy steel engineered to resist low-temperature sulfuric-acid dew-point corrosion and chloride attack in flue-gas paths, making it ideal for boiler economizers and air preheaters. Specificatio
Corrosion Resistant Hastelloy C276 Round Bar for Seawater Application in Solution Annealed Condition
Hastelloy C-276 ChromiumNickel Alloy Round Bar for Shipbuilding 1. Material Description Hastelloy C-276 (UNS N10276, W.Nr. 2.4819) is a nickelchromiummolybdenumtungsten alloy with very low carbon and silicon, designed for excellent corrosion resistance in both oxidizing and reducing media. It offers outstanding resistance to pitting, crevice corrosion, and stress-corrosion cracking in chloride-bearing and contaminated seawater environments, making it well suited to
Inconel 718 Od420mm Torich Nickel Alloy Tube
Inconel 718 Nickel Alloy Tube Inconel 718 nickel alloy tube is an age-hardenable nickel-chromium-iron alloy also containing significant amounts of niobium, molybdenum, titanium and aluminum. It combines good corrosion resistance with extremely high strength. Typical applications include heat exchangers and O-rings. ASTM B163 Alloy 718 Tube , is an austenitic nickel-based superalloy.718 inconel tube exhibits excellent high yield tensile and creep-rupture properties at
