precision stainless steel tubing
"
Auto Parts High Pressure Oil Seamless Steel Tube for Diesel Engine EN10305-1
High Pressure Oil Tubes for Diesel Engine DIN2391, EN10305-1, EN10305-4 St37.4, St35(E235), St45(E255), St52(E355) Production process: Cold drawing bright heat treatment without oxidization 100%nondestructive testing inside flushing under the high pressure antirust oiling outer and inner surface. Main Features: high accuracy, excellent brightness, no oxidization on the outer and inner walls after heat treatment, high cleanness inside wall. The steel tube is able to stand high
Astm A519 Seamless Steel Tube High Precision 6 - 350mm Od For Machining
Standard: ASTM A519 Seamless Carbon and Alloy Steel Mechanical Tubing ASTM A519 Applications: for Machinery, Mechanical Engineer Size range: O.D.:6-350mm W.T.:1-50mm L:max12000mm Raw Material: Round Steel Billet from Bao Steel with grade SAE1008 SAE1010 SAE1018 SAE1020 SAE1026 etc Production: Hot PiercingCold Drawing Sizing to final dimension Steel Grade and Chemical Compositions: Steel C Mn P S Si Cr Mo Grade max max max max min 1008 0.10 0.30-0.50 0.040 0.050 1010 0.08-0
400mm 6" SCH80 Seamless Steel Tube ASTM A106 Gr B GI S40 Carbon Steel Pipe
Torich 400mm 6' SCH80 ASTM A106 Gr B GI S40 Carbon Steel Pipe Size range: O.D.:50-500mm W.T.:5-60mm L:max12000mm Steel Grade and Chemical Compositions: Steel Grade C Mn P S Si Cr Cu Mo Ni V max max max min max max max max max A 0.25 0.27~0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 B 0.30 0.27~1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 C 0.35 0.27~1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 Mechanical Properties: Grade Tensil Strength Mpa Yield Point Mpa Elongtatio
GB/T 5312 Carbon / Carbon - Manganese Seamless Steel Tube Oiled
GB/T 5312 Carbon and Carbon-Manganese Steel Seamless Steel Tubes and Pipes for Ship Material:320/360/410/460/490 and so on. OD:3-420mmWT:0.5-50mmLength:3-12m Characteristic: Good concentricityGood OD and ID toleranceHigh PrecisionStable qualitySmooth RoughnessTORICH QUALITY ASSURANCE Production Processs:RAW MATERIALINCOMING INSPECTIONSTORAGE CUTTINGHAMMERING PICKING LUBRICATION CLEANING PHOSPHORI CLEAN ENDS CUTTINGSTRAIGHTENINGHEAT TREATMENTMIDDLLE CHECK COLD
Cold Drawn Seamless Carbon Steel Tube For Heat Exchanger And Condenser
ASTM A179 Seamless Cold Drawn Low Carbon Steel Heat Exchanger Tubes and Condenser Tubes Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger Tubes and Condenser Tubes Applications: For Boilers, Superheaters, Tubular Heat-Exchangers, Condensers Heat transfer apparatus U bend Tubes according to Customer request Material: Low Carbon Steel Production: Seamless Cold Drawn Size range: O.D.:3.2-76.2mm W.T.:1-15mm L: according to customer requirement. Steel Grade and Chemical
Astm A321 Hot Rolled Steel Tube , Quenched Tempered Carbon Steel Bar 6.35 - 241.3mm
ASTM A321 Hot-rolled,quenched,and Tempered Carbon Steel Bars 6.35-241.3mm Out Diameter 1. Scope This specification covers hot-rolled, quenched, and tem-pered carbon steel bars, of the following sections and sizeranges: 1)Rounds, '% to 9/ in. (6.35 to 241.3 mm) incl, indiameter. 2)Squares, '/4 to 5/ in. (6.35 to 139.7 mm) incl,between parallel surfaces. 3)Hexagons, '/4 in. (6.35 mm) and over betweenparallel surfaces. The values stated in inch-pound units are to be regardedas
ASTM A519 4130 4042 Seamless Cold Drawn Steel Tube
Torich ASTM A519 4130 4042 Steel Round Alloy Tube Seamless Pipe Introduction: Product name 4130 Steel Round Tube Pipe Material 4130, 4042,4135,4137,4140,4142 Usage Mechanical industry, Automotive industry, Aerospace,Construction Standard ASTM A519 Type Alloy Package Bundle, Box,Carton Key words Alloy steel tube, carbon steel tube, mechanical tubing, seamless steel tube, steel tube Production ability 45 tons per month MOQ 3 tons Tubes shall be made by a seamless process and
SAE J524 Seamless Low Carbon Seamless Steel Tube Annealed for Bending / Flaring
SAE J524 Seamless Low Carbon Seamless Steel Tube Annealed for Bending / Flaring Standard: SAE J524 Seamless Low Carbon Steel Tubing Annealed for Bending and Flaring Applications: for Bending and Flaring to auto parts Size range: O.D.:6-88.9mm W.T.:1-15mm L: According to customer Order Table 1- TUBING OUTSIDE DIAMETER TOLERANCE Nominal Tubing OD mm Tolerance mm Up to 25.4 0.10 Over 25.4 to 38.1 inclusive 0.15 Over 38.1 to 50.8 inclusive 0.20 Over 50.8 to 88.9 inclusive 0.25
Low Carbon Seamless Steel Tube DIN 1629 St37.0 Non - Alloyed Steel Pipe
Low Carbon Seamless Steel Tube DIN 1629 St37.0 Non-alloyed Steel Pipe Standard: DIN 1629 Seamless circular unalloyed steel tubes subject to special requirements Applications: used in construction of chemical plant,vessels,pipework and for general mechanical engineering purposes. Production Method: Seamless Cold Drawn/Rolling or Hot Rolling Size range: O.D.:20-660mm W.T.:1-60mm L:max12000mm Steel Grade and Chemical Compositions: Steel grade Type of deoxidization (R, killed
