hot finished seamless tube
"
DOM Steel Tube 30-325mm OD for Mechanical Applications
T5 DOM Steel Tube Drawn Over Mandrel Low Carbon Steel Welded Pipe For Mechanical This product is a Drawn-Over-Mandrel (DOM) steel tube manufactured from low-carbon welded pipe, designed for demanding mechanical applications requiring high precision, uniform mechanical properties, and excellent surface finish. It is cold-drawn over a mandrel to achieve tight tolerances on outside diameter (OD), inside diameter (ID), and wall thickness, resulting in smooth, oxide-free surfaces
ST35 Carbon Steel Oval Tube 30-325mm for Guardrail Construction
Oval Mild Steel Tube ST35 Carbon Steel Welded Elliptical Steel Pipe for Guardrail 1. Material Overview These oval mild steel tubes, typically produced to the DIN 2391 / EN 10305-1 standard, are cold-drawn precision carbon steel tubes offered in grades ST35, ST37, ST45, and ST52 . Theyre designed for high accuracy in dimensions and surface finish, commonly used in hydraulic systems, mechanical engineering, and automotive components making them ideal for guardrail applicatio
Continuously Welded Helical Finned Tube with 30-325 mm Outer Diameter and 6M or Custom Length for Boiler Economizers
Helical Finned Tube Continuously Welded Spiral ND Steel Fin Tube for Boiler Economizers Material A high-frequency resistance welded helical/spiral finned tube produced with an ND steel (09CrCuSb) base tube and optional ND/carbon/stainless fin strip. ND steel is a CuSbCralloyed low-alloy steel engineered to resist low-temperature sulfuric-acid dew-point corrosion and chloride attack in flue-gas paths, making it ideal for boiler economizers and air preheaters. Specificatio
ASTM B407 Nickel Iron Chromium Alloy Seamless Pipe For Heat Exchanger
ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe for Heat Exchanger and Condenser TORICH is a Professional Manufacturer of ASTM A511 MT304 Seamless Steel, which is for Nickel-Iron-Chromium Alloy Steel Tubing for General Service We can manacture stainless steel tubes based on the following technical standard: ASTM A213,ASTM A312,ASTM A511,ASTM A269,ASTM A249,ASTM A358 The Stainless Steel Grade can cover the following: ASTM A213 TP304 TP304L TP304H TP310S TP316
T23 T91 Seamless Steel Tube For High Pressure Boilers
High-pressure Boilers Seamless Steel Tube T23 T91 Omega Tube Tube and material order spection for ASME ferritic material grades. ASME material : SA192 Hot finished or cold finished seamless steel tube SA210-A1 Hot finished or cold finished seamless steel tube SA210-C Hot finished or cold finished seamless steel tube SA213-T2 Hot finished or cold finished seamless steel tube SA213-T11 Hot finished or cold finished seamless steel tube SA213-T22 Hot finished or cold finished
Boiler Seamless Stainless Steel Tube with OD 6-127mm, WT 0.5-12mm and ISO9001 Approval for Heat-Exchanger Service
Boiler Seamless Stainless Steel Tube OD 6-127mm WT 0.5-12mm ISO9001 Approval Boiler seamless stainless steel tubes in OD 6-127 mm and WT 0.5-12 mm are supplied for pressure-bearing heat-transfer service, especially boiler, superheater, condenser, and heat-exchanger tube bundles. The product range matches the typical ASTM A213 scope, which covers seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes, with commonly supplied sizes up to 5 in.
EN 1.7218 25CrMo4 Chromium-Molybdenum Precision Seamless Steel Tube for High-Strength Applications
EN 1.7218 (25CrMo4) Precision Seamless Chromium-Molybdenum Steel Tube Material The grade 25CrMo4 (also designated EN1.7218 ) is a high-quality chromium-molybdenum alloy steel developed for engineering applications requiring good hardenability, strength, toughness and weldability. It is fully suitable for precision seamless steel tubes through cold or hot forming processes. The material is often supplied in a quench & temper (QT) state, or in softened (annealed) condition for
EN10216-3 Seamless Steel Tube For Pressure Purposes Technical Delivery Conditions
EN10216-3 Seamless Steel Tube For Pressure Purposes Technical Delivery Conditions Steels are fully killed made to fine grain. The tubes are manufactured by a seamless process Option 1: The tubes shall be cold finished before heat treatment Forming operation and delivery condition Forming operation Heat treatment condition Symbol for delivery condition Hot finished Normalised +N Hot finished Quenched and tempered +QT Hot finished + cold finished Normalised +N Hot finished +
Polished Surface ASTM A213 Standard Seamless Steel Tube with 3.2-127mm OD for Boiler and Heat Exchanger
Ferritic / Austenitic Alloy Seamless Steel Tube Polishing Surface 3.2 - 127mm OD ASTM A213/A213M-18 seamless ferritic and austenitic alloy-steel tubes are designed for pressure-bearing heat transfer service where dimensional stability, clean internal surface condition, and reliable elevated-temperature performance matter. In this category, the most commonly specified austenitic grades include TP304, TP304L, TP316L, TP321, and TP347H, covering general heat-exchanger duty,
