heavy wall steel pipe
"
Aluminum L-Foot Tension Wound L-Type Fin Tube for Corrosion Resistant Heat Exchangers
L-Type Fin Tube Aluminum L-Foot Tension Wound Finned Tubes for Heat Exchanger Material Overview Aluminum L-foot tension wound finned tubes are bi-metallic or multi-metallic heat transfer elements in which a thin aluminum strip is helically wound around a base tube under controlled tension. An L-shaped foot is first formed on one edge of the fin strip; this foot bears directly on the outer surface of the tube and mechanically locks the fin to the tube along its full length
JIS G3445 STKM13C NBK BKS Carbon Steel Seamless Hydraulic Honed Tubes
JIS G3445 STKM13C NBK BKS Carbon Steel Seamless Hydraulic Honed Tubes Product Name JIS G3445 STKM13C NBK BKS Carbon Steel Seamless Hydraulic Honed Tubes Material Carbon Steel Tube Standard JIS G3445 Outer Diameter 30-250mm Wall Thickness 2-30mm Material Grade SKTM11A,STKM13A,STKM13C,and so on Delivery Condition BK/BKS/GBK/NBK Delivery time within 20-30 days after receiving prpayment Trade Terms FOB Shanghai,Ningbo or any other China main port ID Tolerance: H8 H9 ID Roughness:
4130 4140 30CrMo4 42CrMo4 Chrome Moly Alloy Tube
4130 4140 30CrMo4 42CrMo4 Precision Chrome Moly Alloy Tube Chemical Composition: Standard Steel Grade C(%) Si(%) Mn(%) S(%) P(%) A519 1010 0.05-0.15 0.15-0.35 0.3-0.6 0.050 0.040 1020 0.15-0.25 0.15-0.35 0.3-0.6 0.050 0.040 1045 0.43-0.50 0.15-0.35 0.6-0.9 0.050 0.040 4130 0.28-0.33 0.15-0.35 0.4-0.6 0.040 0.040 4135 0.32-0.39 0.15-0.35 0.6-0.9 0.040 0.040 4140 0.38-0.42 0.15-0.35 0.7-1.0 0.040 0.040 Other Specification: End Shape Beveled end, plain end, vanished,
TORICH BKS Shock Absorber Hydraulic Cylinder Tube ST52 E355 Material
TORICH ST52 E355 BKS Shock Absorber Using CK45 AISI1020 AISI1045 CDS Honed Tube ST52 E355 BKS Shock Absorber Using CK45 AISI1020 AISI1045 CDS Honed Tube Delivery condition: The tubes can be produced in the following delivery conditions: BK (+C) Cold finished/hard (cold finished as drawn). No heat treatment after the last cold forming process. BKW (+LC) Cold finished/soft (lightly cold worked) After the last heat treatment there is a light finishing pass (cold drawing). BKS (
ASME B16.9 10" Butt Weld Concentric Reducer Seamless DN6 DN100
ASME B16.9 Concentric Reducer Standard ASME B16.9 wraps in several parameters that act as a guideline for the manufacturer of wrought factory-made buttwelding fittings such as elbows, tees, reducers including the Carbon Steel Concentric Reducer etc. The fittings need to conform to the values of the following parameters i.e. overall concentric pipe reducer dimensions, ratings, testing, tolerances, and markings. Depending on the buyer, these reducers are made available between
