cold drawn tubes
"
ASTM A513 Type 5 DOM Carbon Steel Tubing for Hydraulic Cylinders
ASTM A513 Type 5 Drawn-Over-Mandrel (DOM) Carbon Steel Mechanical Tubing 1. Material Overview ASTM A513 Type 5 designates electric-resistance-welded (ERW) carbon steel tubing that undergoes a Drawn-Over-Mandrel (DOM) process. This cold-drawing ensures close control of dimensionstight outside/inside diameter and wall thickness tolerancesuniform concentricity, dense surfaces, and predictable mechanical strength. Its widely used for precision mechanical parts including
E155 E195 EN10305-2 Shock Absorber Welded Steel Tube
TORICH Welded Precision Steel Tube EN10305-2 E235 E355 Quick Detail: Product name Welded Precision Steel Tube EN10305-2 E235 E355 Steel Grade E155, E195, E235, E275, E355 Size Range OD range:15-200mm WT range: 0.8-16mm Tolerance OD: (+/-0.06mm) WT: (+/-0.03mm) ID surface 0.4m Straightness 0.5mm/1m Roundness 0.5mm Regular specifications 23.2X1.6, 42X3, 25.4X0.9, 15x1, 19x1.5, 20x1, 20x1.5 Delivery Condition +C, +LC, +SC, +A, +N Standard DIN 2393, ASTM-A513-t6, EN10305, ASTM
Carbon Steel Triangle PTO Shaft Tube for Agricultural Drive
Triangle PTO Shaft Tube Carbon Steel Special-Shaped Pipe for Agricultural Drive Shaft Material This is a specialshaped (triangular or lemon) seamless carbon steel tube, specifically designed for use as a PTO (Power TakeOff) shaft tube in agricultural drive systems. Materials include carbon steel grades such as ST52, E235, E355 (according to EN103051), as well as SAE grades 1010, 1020, 1040, Q345B, and Q355B. These are colddrawn and optionally coldfinished,
DOM Steel Tube for Roll Cage ASTM DIN GB JIS API Certified
Round DOM Roll Cage Tubing Structural Steel Pipe DOM Tubing For Roll Cage Material Drawn Over Mandrel (DOM) tubing is produced by electric resistance welding of carbon-steel strip followed by cold drawing over a mandrel to remove weld flash and enhance mechanical properties. This process yields: Uniform wall thickness and concentric OD/ID. Improved yield and tensile strength compared to standard ERW tubes. Smooth OD/ID surfaces, requiring minimal machining. Specifications
Lightweight Corrosion Resistant Thin-Walled Seamless Stainless Steel Tube for Motor Housing
Thin-Walled Seamless Stainless Steel Tube for Motor Housing Material Overview A thin-walled seamless stainless steel tube is a precision-manufactured hollow stainless component with a very small wall thickness relative to its diameter. The seamless process removes weld seams, ensuring uniform properties, improved reliability, and excellent performance in high-precision applications such as electric motor housings. Specifications Outer Diameter (OD): approx. 1.0 mm up to 100
Medical Grade Corrosion Resistant Stainless Steel Capillary Tube with High Dimensional Tolerance
Stainless Steel Capillary Tube Small-Diameter Medical-Grade Stainless Steel Pipe Material This product is a stainless steel capillary tube (also called a micro or small-diameter stainless steel pipe), engineered for medical and precision fluidic systems. It provides a hollow cylindrical conduit with very small internal diameters (ID) and tight dimensional tolerances, suitable for transporting small volumes of fluid or gas under controlled conditions. The tubes are often
Bundy Tube Double-Wall Low Carbon Steel Tube Copper Plated for Automotive Use
Bundy Tube Double-Wall Copper-Plated Low-Carbon Steel Tube for Automotive Use Material Overview Bundy tube is a double-wall low-carbon steel tube manufactured by rolling a steel strip into a 720 overlap and copper-brazing the seam. This produces a concentric double-wall tube with a continuous brazed bond between the two walls. For automotive brake and fuel lines, this design offers: The mechanical strength and rigidity of steel The corrosion protection and brazeability of
100Cr6 Bearing Tube Small Diameter Cold Rolled Precision Seamless Tube for Mechanical Components
Bearing Tube: Small-Diameter Cold-Rolled Precision Seamless Tube for Mechanical Components Material Overview This product is a small-diameter, cold-rolled (or cold-drawn) precision seamless steel tube designed for high-demand mechanical partsespecially where fatigue resistance, wear resistance, dimensional stability, and consistent microstructure are critical. It is typically produced in two material families: Through-hardening bearing steels (100Cr6, 100CrMn6): high-carbon
DOM Carbon Steel Tube for Precision Machinery 30-425mm OD
Dom Round Tubing Welded Carbon Round Steel Tube for Precision Machinery Material Overview Dom Round Tubingcommonly referred to as DOM (Drawn Over Mandrel)is produced from electric-resistance-welded (ERW) steel (typically AISI 1020, 1026, or equivalent). It undergoes cold drawing over a mandrel to remove weld flash, enhancing dimensional accuracy, concentricity, strength, and surface quality. It is widely used in precision machinery due to these enhanced characteristics.
