alloy steel seamless tube
"
S235JR Cold Formed Square Tube Industrial Use Square Hollow Section for Structural Frames
S235JR Square Tube Carbon Steel Square Tube for Industrial Use Material S235JR is a non-alloy structural (mild) carbon steel grade used for general-purpose load-bearing fabrication. In cold-formed square hollow sections (SHS) , steel strip/plate is roll-formed at ambient temperature, welded (typically high-frequency), and then sized to achieve stable geometry and consistent dimensions.Note on designation: for European hollow sections, the grade is often specified as S235JRH
A928 / A928M S32205 Ferritic / Austenitic Duplex Electric Fusion Welded Pipe
A928/A928M Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal Electric-fusion-welded Steel Pipe for corrosive service. Grade: S31200, S31260, S31500, S31803, S32003, S32205, S32304, S32550, S32750, S32900, S32950, S32760, S32520 Manufacture: Welding, the joints are fully penetration double-welded or single-welded Five Classes of pipes are covered : Class 1 - Pipes shall be double welded by processes using filler metal in all
Cold Drawn Dom Steel Tubing Welded Non Alloy Astm A513 1020 For Hydraulic Pipe
ASTM A513 1020 DOM Cold Drawn Welded Steel Tube ASTM A513 1020 DOM Cold Drawn Welded Steel Tube Thickness 1.5-15mm Out Diameter 18-230mm Length 5-12meter 5.8meters for 20' container,6meters To 12 meters for 40'container Standard 1026 Application cold drawn seamless 1026 dom steel tube price is widely used in following fields: 1.For low pressure liquid delivery such as water , gas and oil . 2.For construction End Threading ,coupling and with plastic caps protected Surface
Stress Relieved Cold Drawn Seamless Steel Tube With Mechanical Property
ASTM A311 Cold-drawn Mechanical Property Stress-relieved Carbon Steel Bars This specification covers two classes. nine grades. andfour conditions of stress-relieved cold-drawn carbon steel barsproduced to mech anical property requirements. One class.B. iscold drawn with higher than normal (heavy) drafts to providehigher strength levels, and four grades provide improvedmachinability. Materials and Manufacture 1.Melting Practice -The steel shall be made by one ormore of the
25Cr Duplex Steel Pipe S32750 S32760 Super Duplex Steel Tubing
25Cr Duplex Steel Pipe S32750 S32760 Super Duplex Steel Tubing Applications: For chemical , boiler industry Technique: Cold worked and hot worked Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Material 200 series: 201, 202 300 series: 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S,309S,2205,2507,2520 400 series: 410, 410S,420, 430, 431, 440A,904L Size range: O.D. 8-530mm W.T. 0.5mm-30mm Length max 12000mm Characteristic: Good concentricity
Duplex 2205 Stainless Steel Tube
DUPLEX 2205 STAINLESS STEEL PIPE 2205 is a duplex (austenitic-ferritic) stainless steel containing about 40 50% ferrite in the annealed condition. 2205 has been a practical solution to chloride stress corrosion cracking problems experienced with 304/304L or 316/316L stainless. The high chromium, molybdenum and nitrogen contents provide corrosion resistance superior to 316/316L and 317L stainless in most environments. The design strength of 2205 is significantly higher than
ASTM A789 UNS S32750 Super Duplex 2507 Duplex Stainless Steel pipe and tube
ASTM A789 UNS S32750 Super Duplex 2507 Duplex Stainless Steel pipe and tube Applications: For chemical , boiler industry, construction Technique: Cold worked and hot worked Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Material 200 series: 201, 202 300 series: 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S,309S,2205,2507,2520 400 series: 410, 410S,420, 430, 431, 440A,904L Size range: O.D. 8-530mm W.T. 0.5mm-30mm Length max 12000mm
SAE 1022 TORICH Carbon Steel Tube For Automobile Outer
SAE 1022 carbon steel for automobile outer tube 1022 is a general purpose low tensile low hardenability carbon steel generally supplied in the black hot rolled condition, with a typical tensile strength range 360 - 560 Mpa and Brinell hardness range 100 - 170.Characterised by excellent weldability, fairly good machinability with reasonable strength and good ductility. 1022 due to its very low hardenability will through harden only in very small sections to relatively moderate
TORICH DIN2462 Sputtering Target 304l Tubing 133x4x4113mm
TORICH DIN2462 304L Stainless Steel Pipe 133x4x4113mm for Sputtering Target Quick Details: Grade:304L Specification: 133*4*4113mm Tolerance of OD:132.8-133.5mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+5mm Ellipticity: Roundness deviation0.10mm Straightness deviation: Overall length direction0.5mm Standard:DIN2462 Special requirements: 1. Quality requirements: Tolerance of OD:132.8-133.5mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+5mm Ellipticity:
