Polished Seamless Stainless Steel Pipe For Liquid Pipeline 0Cr18Ni9 1Cr18Ni9Ti
Product Details
stainless steel round tube
,large diameter stainless steel tube
Polished Seamless Stainless Steel Pipe For Liquid Pipeline 0Cr18Ni9 1Cr18Ni9Ti
Stainless Steel Seamless Pipes For Fluid Transport, made according to Chinese national standard GB/T 14976-94.
GB/T 14976-94 is a standard applicable for stainless steel seamless pipes which is produced by hot -rolled (extruded and expanded) or cold-drawn (cold-rolled) and used for fluid transport.
Steel pipes fall into two categories, i.e. the hot -rolled (extruded and expanded) steel pipes and cold-drawn (cold-rolled) steel pipes.
GB/T14976-1994 Seamless Stainless Steel Pipe for Liquid Services
0Cr13 0Cr18Ni9 1Cr18Ni9Ti 0Cr17Ni12Mo2 0Cr18Ni12Mo2Ti
Application: For Fluid Transport
Production method: hot -rolled (extruded and expanded) or cold-drawn (cold-rolled)
Material: 0Cr13, 0Cr18Ni9, 1Cr18Ni9Ti, 0Cr17Ni12Mo2, 0Cr18Ni12Mo2Ti and so on
Length:
The ordinary lengths of steel pipes are specified as follows:
Hot-rolled (extruded and expanded) steel pipes: 2 ~12m
Cold-drawn (cold-rolled) steel pipes: 2 ~ 8m
The length to be supplied for the cold-drawn (cold-rolled) steel pipes with O.D ≤ 10mm shall not be smaller than 1m.
Bending tolerance:
Wall thickness < 15mm, Bending≤ 1.5 mm/m
Wall thickness ≥15mm, Bending≤ 2.0 mm/m
Hot expanded pipes, Bending≤ 3.0 mm/m
Shape of ends:
Both ends of pipes shall be cut squarely and burs shall be removed from the ends.
Chemical Compositions:
| Steel Grade | Chemical Compositions(%) | |||||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Ti | Other | |
| 0Cr18Ni9 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 8.00-11.00 | 17.00-19.00 | / | / | / |
| 00Cr19Ni10 | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 8.00-12.00 | 18.00-20.00 | / | / | / |
| 0Cr23Ni13 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 12.00-15.00 | 22.00-24.00 | / | / | / |
| 0Cr25Ni20 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 19.00-22.00 | 24.00-26.00 | / | 5C%~0.07 | / |
| 0Cr18Ni10Ti | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 9.00-12.00 | 17.00-19.00/ | / | ≥5C% | / |
| 0Cr18Ni11Nb | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 9.00-13.00 | 17.00-19.00 | / | / | Nb≥10C% |
| 0Cr17Ni12Mo2 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 10.00-14.00 | 16.00-18.50 | 2.00-3.00 | / | / |
| 00Cr17Ni14Mo2 | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 12.00-15.00 | 16.00-18.00 | 2.00-3.00 | / | / |
| 0Cr19Ni13Mo3 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 11.00-15.00 | 18.00-20.00 | 3.00-4.00 | / | / |
| 00Cr19Ni13Mo3 | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 11.00-15.00 | 18.00-20.00 | 3.00-4.00 | / | / |
| 0Cr18Ni12Mo2Ti | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 11.00-14.00 | 16.00-19.00 | 1.80-2.50 | 5C%~0.07 | / |
| 1Cr18Ni12Mo2Ti | ≤0.12 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 11.00-14.00 | 16.00-19.00 | 1.80-2.50 | 5(C%-0.02) ~0.80 | / |
| 0Cr18Ni12Mo3Ti | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 11.00-14.00 | 16.00-19.00 | 2.50-3.50 | 5C%~0.07 | / |
| 1Cr18Ni12Mo3Ti | ≤0.1 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 11.00-14.00 | 16.00-19.00 | 2.50-3.50 | 5(C%-0.02) ~0.80 | / |
| 0Cr18Ni12Mo2Cu2 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 11.00-14.00 | 17.00-19.00 | 1.20-2.75 | / | / |
| 00Cr18Ni14Mo2Cu2 | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 12.00-16.00 | 17.00-19.00 | 1.20-2.75 | / | Cu 1.00~2.50 |
| 1Cr18Ni9Ti | ≤0.12 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.030 | 8.00-11.00 | 17.00-16.00 | / | 5(C%-0.02) ~0.80 | Cu 1.00~2.50 |
| 0Cr13 | ≤0.08 | ≤0.60 | ≤0.80 | ≤0.035 | ≤0.030 | ≤0.60. | 12.00-14.00 | / | / | / |
| 0Cr26Ni5Mo2 | ≤0.08 | ≤1.00 | ≤1.50 | ≤0.035 | ≤0.030 | 3.00-6.00 | 23.00-28.00 | 1.00-3.00 | / | / |
Manufacture process:
- Metallurgical process of steel
Steel shall be smelted using arc furnace.
It is possible to use the other processed for smelting the steel after an agreement is reached between the supplier and the client.
- Manufacture processes for steel pipes
Steel pipes shall be manufactured using hot-rolling (extruding and expanding) or cold-drawing (cold-rolling) processes. In case, a special manufacture process is requested by the client, it shall be specified in the contract.
Delivery condition:
Steel pipes shall be delivered after the heat treatment and pickling are made in the manufacturer.
Mechanical properties:
The longitudinal mechanical properties of steel pipes under heat treatment conditions (tensile strength and elongation) shall comply with the specifications made in the following table. It is possible to determine the yield strength of steel pipes upon the request made by the client when it is specified in the contract.
| Steel Grade | Mechanical properties | ||
| Tensile Strength MPa | Yield Strength MPa | Elongation % | |
| Not smaller than | |||
| 0Cr18Ni9 | 520 | 205 | 35 |
| 00Cr19Ni10 | 480 | 175 | 35 |
| 0Cr23Ni13 | 520 | 205 | 35 |
| 0Cr25Ni20 | 520 | 205 | 35 |
| 0Cr18Ni10Ti | 520 | 205 | 35 |
| 0Cr18Ni11Nb | 520 | 205 | 35 |
| 0Cr17Ni12Mo2 | 520 | 205 | 35 |
| 00Cr17Ni14Mo2 | 480 | 175 | 35 |
| 0Cr19Ni13Mo3 | 520 | 205 | 35 |
| 00Cr19Ni13Mo3 | 480 | 175 | 35 |
| 0Cr18Ni12Mo2Ti | 530 | 205 | 35 |
| 1Cr18Ni12Mo2Ti | 530 | 205 | 35 |
| 0Cr18Ni12Mo3Ti | 530 | 205 | 35 |
| 1Cr18Ni12Mo3Ti | 530 | 205 | 35 |
| 0Cr18Ni12Mo2Cu2 | 520 | 205 | 35 |
| 00Cr18Ni14Mo2Cu2 | 480 | 180 | 35 |
| 1Cr18Ni9Ti | 520 | 205 | 35 |
| 0Cr13 | 370 | 180 | 22 |
| 0Cr26Ni5Mo2 | 590 | 390 | 18 |
Process performances:
- Hydrostatic pressure test
- Flattening test
- Expand test
- Intergranular corrosion test
- Surface quality
- Ultrasonic test
References of standards:
GB 222 Method of sampling steel for determination of chemical composition and permissible variations for product analysis
GB 223 Methods for chemical analysis of iron, steel and alloy
GB 228 Metallic materials - Tensile testing
GB 241 Metal tubes - Hydrostatic pressure testing
GB 242 Metallic materials – Tube - Drift expanding test
GB 246 Metallic materials - Flattening test
GB 2102 Acceptance, packing, marking and certification of pipe
GB 4163 Stainless steel pipes - Method for ultrasonic testing
GB 4334.1 Stainless steels - 10% oxalic acid etch test
GB 4334.2 Stainless steels - Ferric sulfate-sulfuric acid corrosion test
GB 4334.3 Stainless steels - 65% nitric acid corrosion test
GB 4334.4 Stainless steels - Nitric-hydrofluoric acid corrosion test
GB 4334.5 Stainless steels - Method of copper sulphate-sulphuric acid corrosion test
GB 4334.6 Stainless steels - 5% sulfuric acid corrosion test
GB 6397 Metallic materials - Test pieces for tensile testing
GB 7735 Steel tubes - The inspection method on eddy current test
-
Auto Parts ASTM A513 Cold Rolling Welded Steel Tubes with DOM Production
Auto Parts ASTM A513 Welded Steel Tubes with DOM production ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Applications: for Machinery, Mechanical Engineering 1. Standard: ASTM A513 cold rolling welded precision steel tubes 2. Steel Grade: SAE1010, SAE1020, other materials upon agreement with customers. 3. Production method: Cold rolling on the weled steel tubes, to reach high accuracy on the OD and WT tolerance 4. Size range: O.D.:6-350mm W.T. -
25mm Diameter Bright Annealing Seamless Steel Tube for Hydraulic Systems
EN10305-1 E235 E355 NBK Bright Annealing Precision Steel Pipes for Hydraulic Systems EN10305-1 NBK Bright Annealed Precision steel pipes for Hydraulic system OD:4-80 (mm) WT0.5-10 (mm) Length 1000-12000mm Product name: Seamless Precision Steel Pipe Application: for hydraulic systems precision steel pipes for Hydraulic system OD (mm) WT (mm) Length (mm) 4 0.5 5800-6000 4.0 1.0 5800-6000 5.0 1.0 5800-6000 6.0 1.0 5800-6000 6.0 1.5 5800-6000 8.0 1.0 5800-6000 9.5 0.89 5800-6000 -
Precision Seamless Black Phosphating Steel Tube for Hydraulic Systems
Steel Pipes with high precision for Hydraulic Systems with Black Phosphating surface Black Phosphated Hydraulic Tubes with High Precision and tight tolerance, the tubes are produced by precision cold drawn and cold rolling, then bright annealed in a protected atmosphere, afterwards it is blackphosphated on the surface Production process: DIN series tubes, cold drawn and bright annealed precision seamless steel tube is used as the tube to be phosphated. The phosphorization is -
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37 Production Process: Cold rolling by Cold pilger machine and Cold rolling machine,galvanized and zinc plated could be applied. Cold Rolled and Galvanized Steel Tube Production process: DIN highly accurate, cold rolled and bright seamless steel tube is used as the tube to be galvanized. The outer wall of tube is electroplated. The caps are covered at two ends of tube to prevent from the dust. Main Features:
