JIS G 3460 Round Carbon and Nickel Steel Pipe For Low Temperature Service
Product Details
nickel alloy pipe
,heat exchanger tubes
Torich International Co.,Ltd is specialized in manufacturing and suppying JIS G 3460 Carbon and Nickel Steel Pipe for low temperature service
JIS G 3460 Steel Tube Size range:
OD: 5-420mm
WT: 0.5-50mm
Length: Upon request
JIS G 3460 Nickel Steel Pipe Application: for low temperature service
JIS G 3460 Nickel Steel Tube Shipment:
FCL, LCL workable. Bulk Vessel workable By Air, By Sea, by Courier
| CHEMICAL COMPOSITION % max | ||||||
| Steel grade | C | Si | Mn | P | S | Ni |
| STPL 380 | 0.25 | 0.35 | 1.35 | 0.035 | 0.035 |
|
| STPL 450 | 0.18 | 0.10-0.35 | 0.30-0.60 | 0.030 | 0.030 | 3.20-3.80 |
| STPL 690 | 0.13 | 0.10-0.35 | 0.9 | 0.030 | 0.030 | 8.50-9.50 |
Remarks:
When it is practically difficult to apply the test due to the dimension of a pipe,STPL 380 shall , by way of compensation,contain 0.01% or more of acid soluble aluminum, or alternative,0.015% or more of total aluminum.
| MECHANICAL PROPERTIES min | |||
| Steel grade | Tensile strength Mpa | Yeild point or proof stress Mpa | Elongation % |
| STPL 380 | 380 | 205 | 35 |
| STPL 450 | 450 | 245 | 30 |
| STPL 690 | 690 | 520 | 21 |
Remarks:
1.The value of elongation given in above table shall not be apply to the pipe whose outside diameter is under 40mm,However, the value of elongation shall be recorded.
-
Auto Parts ASTM A513 Cold Rolling Welded Steel Tubes with DOM Production
Auto Parts ASTM A513 Welded Steel Tubes with DOM production ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Applications: for Machinery, Mechanical Engineering 1. Standard: ASTM A513 cold rolling welded precision steel tubes 2. Steel Grade: SAE1010, SAE1020, other materials upon agreement with customers. 3. Production method: Cold rolling on the weled steel tubes, to reach high accuracy on the OD and WT tolerance 4. Size range: O.D.:6-350mm W.T. -
25mm Diameter Bright Annealing Seamless Steel Tube for Hydraulic Systems
EN10305-1 E235 E355 NBK Bright Annealing Precision Steel Pipes for Hydraulic Systems EN10305-1 NBK Bright Annealed Precision steel pipes for Hydraulic system OD:4-80 (mm) WT0.5-10 (mm) Length 1000-12000mm Product name: Seamless Precision Steel Pipe Application: for hydraulic systems precision steel pipes for Hydraulic system OD (mm) WT (mm) Length (mm) 4 0.5 5800-6000 4.0 1.0 5800-6000 5.0 1.0 5800-6000 6.0 1.0 5800-6000 6.0 1.5 5800-6000 8.0 1.0 5800-6000 9.5 0.89 5800-6000 -
Precision Seamless Black Phosphating Steel Tube for Hydraulic Systems
Steel Pipes with high precision for Hydraulic Systems with Black Phosphating surface Black Phosphated Hydraulic Tubes with High Precision and tight tolerance, the tubes are produced by precision cold drawn and cold rolling, then bright annealed in a protected atmosphere, afterwards it is blackphosphated on the surface Production process: DIN series tubes, cold drawn and bright annealed precision seamless steel tube is used as the tube to be phosphated. The phosphorization is -
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37 Production Process: Cold rolling by Cold pilger machine and Cold rolling machine,galvanized and zinc plated could be applied. Cold Rolled and Galvanized Steel Tube Production process: DIN highly accurate, cold rolled and bright seamless steel tube is used as the tube to be galvanized. The outer wall of tube is electroplated. The caps are covered at two ends of tube to prevent from the dust. Main Features:
