Weldable Nickel Base Alloy Steel Pipe Make Pumps / Valves Creep - Resistant
Product Details
inconel 600 tube
,inconel 601 tube
Nickel Base Alloy Inconel 625 Hex Bar Tube Make Pumps and Valves and Other High Pressure Equipment.
Inconel Alloy 625
(UNS designation N06625) is a nickel-based superalloy that possesses
high strength properties and resistance to elevated temperatures. It also demonstrates
remarkable protection against corrosion and oxidation. Its ability to withstand high stress
and a wide range of temperatures, both in and out of water, as well as being able to resist
corrosion while being exposed to highly acidic environments makes it a fitting choice for
nuclear and marine applications.
Inconel 625 was developed in the 1960s with the purpose of creating a material
that could be used for steam-line piping. Some modifications were made to its
original composition that have enabled it to be even more creep-resistant and
weldable. Because of this, the uses of Inconel 625 have expanded into a wide range
of industries such as the chemical processing industry, and for marine and nuclear
applications to make pumps and valves and other high pressure equipment.
Nickel Alloy Chemical Composition:
| UNS | Chemical ,% | ||||||||
| C max | Si max | S max | Mn max | Ni | P | V | W | |||
| N02200 | 0.15 | 0.35 | 0.01 | 0.35 | 99 min | … | … | … | |
| N02201 | 0.02 | 0.35 | 0.01 | 0.35 | Ni+Co 99min | … | … | … | |
| 10276 | 0.01 | 0.08 | 0.03 | 1.0 | Balance | 0.04max | 0.35max | 3.0-4.5 | |
| Grade | UNS | Tensile Strength Min Ksi(Mpa) | Yield Strength Min Ksi(Mpa) | Elongation in 2 in or 50 mm ,Min,% | ||||||
| S04400 | 70(483) | 28(193) | 35 | ||||||
| S06600 | 80(552) | 35(241) | 30 | ||||||
| S06601 | 80(552) | 30(207) | 30 | ||||||
| S06625 | 120(827) | 60(414) | 30 | ||||||
| UNS N08800 | 75(520) | 30(205) | 30 | ||||||
| UNS N08810 | 85(586) | 35(241) | 30 | ||||||
| UNS N08811 | 65(448) | 25(172) | 30 | ||||||
| UNS N08825 | 85(586) | 35(241) | 30 | ||||||
| UNS N02200 | 55(379) | 15(103) | 40 | |||||||
| UNS N02201 | 50(345) | 12(83) | 40 | |||||||
| UNS N10276 | 50(690) | 41(283) | 40 | ||||||
Note :
Inconel 625 : Gr1: Annealed at 871ºC min
Gr2:Solution annealed at 1090 ºC min with or without subsequent stabilization.
Available Size:
OD: 6.53-219.1 mm
WT: 0.89-12.7 mm
L: 20 meter Max
Available Specification :
ASTM B161 /B 163/ B 165/ B 167/ B 407/ B 423/ B 444/ B 751/ B 775/ B 829
ASTM SB161 /SB 163/ SB 165/ SB 167/ SB 407/ SB 423/ SB 444/ SB 751/ SB 775/ SB 829
Delivery Condition:
- Annealed and pickled
- Bright and Annealed
- Annealed and Pickled + Polishing
- Bright and Annealed + Polishing
-
Auto Parts ASTM A513 Cold Rolling Welded Steel Tubes with DOM Production
Auto Parts ASTM A513 Welded Steel Tubes with DOM production ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Applications: for Machinery, Mechanical Engineering 1. Standard: ASTM A513 cold rolling welded precision steel tubes 2. Steel Grade: SAE1010, SAE1020, other materials upon agreement with customers. 3. Production method: Cold rolling on the weled steel tubes, to reach high accuracy on the OD and WT tolerance 4. Size range: O.D.:6-350mm W.T. -
25mm Diameter Bright Annealing Seamless Steel Tube for Hydraulic Systems
EN10305-1 E235 E355 NBK Bright Annealing Precision Steel Pipes for Hydraulic Systems EN10305-1 NBK Bright Annealed Precision steel pipes for Hydraulic system OD:4-80 (mm) WT0.5-10 (mm) Length 1000-12000mm Product name: Seamless Precision Steel Pipe Application: for hydraulic systems precision steel pipes for Hydraulic system OD (mm) WT (mm) Length (mm) 4 0.5 5800-6000 4.0 1.0 5800-6000 5.0 1.0 5800-6000 6.0 1.0 5800-6000 6.0 1.5 5800-6000 8.0 1.0 5800-6000 9.5 0.89 5800-6000 -
Precision Seamless Black Phosphating Steel Tube for Hydraulic Systems
Steel Pipes with high precision for Hydraulic Systems with Black Phosphating surface Black Phosphated Hydraulic Tubes with High Precision and tight tolerance, the tubes are produced by precision cold drawn and cold rolling, then bright annealed in a protected atmosphere, afterwards it is blackphosphated on the surface Production process: DIN series tubes, cold drawn and bright annealed precision seamless steel tube is used as the tube to be phosphated. The phosphorization is -
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37
Precision Seamless Galvanized Steel Tubes DIN2391 EN103052 ST35.0 ST37 Production Process: Cold rolling by Cold pilger machine and Cold rolling machine,galvanized and zinc plated could be applied. Cold Rolled and Galvanized Steel Tube Production process: DIN highly accurate, cold rolled and bright seamless steel tube is used as the tube to be galvanized. The outer wall of tube is electroplated. The caps are covered at two ends of tube to prevent from the dust. Main Features:
