thick wall steel tube
"
GB/T 32970 Longitudinal Submerged Arc Welded Steel Pipe For High Pressure Service At High Temperatures
GB/T 32970 Longitudinal Submerged-Arc Welded Steel Pipe For High Pressure Service At High Temperatures Material The material used in GB/T 32970 longitudinal submerged-arc welded steel pipes for high pressure service at high temperatures is carbon steel. Specification The specification of GB/T 32970 includes the following parameters: Outer diameter range: 219-2820mm Wall thickness range: 6-30mm Length: 6-12 meters Pipe end: Bevel end, plain end, or threaded end Key Features GB
GB/T 28413 SA178 High Frequency Welded Carbon Steel Pipes For Boiler Heat Exchangers
GB/T 28413 SA178 High Frequency Welded Carbon Steel Pipes For Boiler Heat Exchangers Introduction GB/T 28413 SA178 is a standard specification for high-frequency welded carbon steel pipes commonly used in boiler heat exchangers. This article provides an overview of the material, specification, key features, chemical composition, mechanical properties, steel grades, applications, and possible alternative grades for SA178 pipes. Material The material used for GB/T 28413 SA178
Seamless 0.5 Motor Housing Thin Walled Tube Stainless Steel 304
Stainless Steel 304 Seamless 0.5 Thin-Walled Motor Housing Thin-Walled Tube Shield Tube Quick detail : Origin China Brand name Torich Certificate ISO9001 TS16949 Material 304,316,201 etc Product name Stainless Steel 304 Seamless 0.5 Thin-Walled Motor Housing Thin-Walled Tube Shield Tube Capacity Burnished Honed Cutting Chamfering Basic introduction Production method:Seamless Cold drawning Material : Steel Grade: What we can do : Cold draw Application: Motor Housing Thin
JIS Standard Threaded TA2 Titanium Radiator Fin Tube
High Efficiency TA2 Titanium Tube Evaporator Internal And External Thread Fin Tube Specification range: ( 8.0-38.0)mm ( 0.5-2.0)mm Shape: Fin, Pockmarked Surface, Spiral sheet, Point (surface and tube bore) Material grade: Titanium and titanium alloy tubes (TA1, TA2, TA3, ta8, ta8-1, ta9, ta9-1, TA10, gr.1, gr.2, gr.7, gr.12, gr.16, etc.) austenitic stainless steel pipe SUS304, SUS316L, 321, 904L, etc Ferritic stainless steel pipe 409,409L,439L,SUS445J2 Duplex stainless
Threaded Seamless TA2 Titanium Tube For Evaporator
Evaporator Internal And External Thread Fin High Efficiency TA2 Titanium Tube Specification range: ( 8.0-38.0)mm ( 0.5-2.0)mm Shape: Fin, Pockmarked Surface, Spiral sheet, Point (surface and tube bore) Material grade: Titanium and titanium alloy tubes (TA1, TA2, TA3, ta8, ta8-1, ta9, ta9-1, TA10, gr.1, gr.2, gr.7, gr.12, gr.16, etc.) austenitic stainless steel pipe SUS304, SUS316L, 321, 904L, etc Ferritic stainless steel pipe 409,409L,439L,SUS445J2 Duplex stainless
S235JR Cold Formed Square Tube Industrial Use Square Hollow Section for Structural Frames
S235JR Square Tube Carbon Steel Square Tube for Industrial Use Material S235JR is a non-alloy structural (mild) carbon steel grade used for general-purpose load-bearing fabrication. In cold-formed square hollow sections (SHS) , steel strip/plate is roll-formed at ambient temperature, welded (typically high-frequency), and then sized to achieve stable geometry and consistent dimensions.Note on designation: for European hollow sections, the grade is often specified as S235JRH
TORICH Astm 1020 Thick Wall Seamless Steel Pipe
ASTM 1020 SMALL DIAMETER THICK WALL SEAMLESS STEEL PIPE AISI 1020 Carbon Seamless Steel Pipe Tube Chemical Composition(%) Mechanical Property C Si Mn S P Cr Ni Cu Mo Yield Strength Tensile Strength ( s ) ( b ) 0.18~0.23 0.15-0.35 0.30~0.60 0.050 0.040 0.25 0.25 0.25 - 414 (MPa) 483 (MPa) End Shape Beveled end, plain end, vanished, or adding plastic caps to protect the two ends as per customer's requirements Surface Oiled, Galvanized, Phosphate etc Treatment Technique
Brown Fintube Hairpin Heat Exchanger Aisi Embedded Fin Tube 1mm Thickness
Brown Fintube Hairpin Heat Exchanger Brown Fintube Embedded Finned Tube Embedded finned tube production line equipment is successfully manufactured after many years of experience and practice, and has successively entered the market. The equipment is upgraded with reference to the advanced technology of British embedded finned tube equipment. PLC control mode is developed according to domestic production requirements, simple operation - processing - complete supporting
Heat Exchanger TA2 Titanium Fin Tube With Pockmarked Surface
High Efficiency TA2 Pockmarked Surface Titanium Fin Tube Material grade: Titanium and titanium alloy tubes (TA1, TA2, TA3, ta8, ta8-1, ta9, ta9-1, TA10, gr.1, gr.2, gr.7, gr.12, gr.16, etc.) Raw Material Guarantee: We use best raw material from China Steel (CSPM) which has better control over the properties and chemical composition of sponge titanium smelting and billet. It relies on CSPMs strong R&D skills, modern production facilities and national laboratories to ensure
