thick wall steel tube
"
Welded Not Alloy ERW Steel Pipes CA55 For Lower Temperatures
ASTM A671 ERW Steel Pipes CA55 CB60 CB65 for Atmospheric and Lower Temperatures Size range :OD 400mm,WT 6mm. Production method: OD tolerance:5% of the specified outside diameter. Out of Roundness: Difference between major and minor outside diameter 1% Thickness: The minimum wall thickness at any point in the pipe shall not be more than 0.01inch 0.3mm under the specified nominal thickness. Heat treatment: 1. Without heat treatment 2. Stress released 3. Normalizing 4.
Forging Weld Neck Flange Asme B16.5 Standard Dn10 - Dn800 For Connection
ASME B16.5 DN10~DN 800 Forging Stainless Steel Weld Neck Flange Steel Flange Standards ASME B16.5 GB9112_9131 SH3406 DIN2576 /27/66 DIN3632_2638 Material 317/L 304/L 316/L 310/L 310/L 309/S 347/H 321/321H 904/L Surface Treatment Anti-rust Oil,Transparent/Yellow/Black Anti-rust Paint,Zinc, Sizes DN10 to DN800 Pressure Class 150LB, 300LB, 400LB, 600LB, 900LB,1500LB, etc. Related Type Plate type Flat Welding Flange,Slip on Neck Flange, Welding Neck Flange, Long Welding Neck
Stainless Steel Structural Tubing , Seamless Hollow Structural Steel Pipe
ASTM A847 Cold Drawn Seamless Low Alloy Square/Rectangular Structural Pipes Size range: O.D.: 6-813mm W.T.:1-12.7mm L: according to customer requirement Steel Grade and Chemical Compositions: Steel Grade and Chemical Compositions C Mn P S Cu 0.24 1.40 A 0.06 0.80B Mechanical Properties: Tensile strength min Mpa 483 Yield strength min Mpa 345 Elongation min % 19A Manufacture: Tubes are made by seamless process. The tubing may be stress relieved or annealed, as is
10*2 12*1 Small Bore Tubing For Nozzle Chemical Injection Liquid System
10*2 **1 12*1 Small Bore Tubing For Nozzle Chemical Injection Liquid System Quick detail: Standard:EN 10305-1 DIN2391 Material: E235 E355 1010 1020 10# 20# St37 St42 etc Size: 4-12mm WT:05-7mm Description: Chemical composition of EN 10305-1 Steel Grade C Si Mn P S Al Steel name Steel number max max max max max min E215 1.0212 0.10 0.05 0.70 0.025 0.025 0.025 E235 1.0308 0.17 0.35 1.20 0.025 0.025 - E355 1.0580 0.22 0.55 1.60 0.025 0.025 - Mechanical and techological
Titanium Welded Seamless Alloy Steel Pipe TA3 TA9 TA10 0.5 - 2mm Wall Thickness
Titanimu Alloy Steel Pipe GB/T 362595 for Heat Exchanger and Cold Condensors Material : Titanimu alloy steel, Characteristic of the material:e High strength ,low density,good mechanical property ,good tenacity.good corrosion resistanc. It can be made by seamless and welded.and widely apply in power generation,Aerospace,oil and gas ,chemical processing. Available size list: Cold drawn Seamless pipes with Ti and Ti alloy grade condition Diameter/mm Wall thickness /mm 0.5 0.6 0
Welded High Strength Low Alloy Structural Steel Pipe ASTM A847 Material
ASTM A847 Welded High-Strength Low Alloy Structural Pipes Size range: O.D.: 6-1626mm W.T.:1-15.88mm L: according to customer requirement Steel Grade and Chemical Compositions: Steel Grade and Chemical Compositions C Mn P S Cu 0.24 1.40 A 0.06 0.80B Mechanical Properties: Tensile strength min Mpa 483 Yield strength min Mpa 345 Elongation min % 19A Manufacture: Tubes are made by welded process. Welded tubing shall be made from flat-rolled steel by the electric-resistance
Galvanized Double Wall Bundy Tube Zinc Coating For Automobile Brake
TORICH With Zinc Coating For Automobile Brake Double Wall Galvanized Bundy Tube 1. Standard GM123M, GM124M, TS7600G, GB 11258-89 2. Steel Grade/Steel Material/Steel Number: Low carbon steel, such as SPCCBLDBLC 3. Raw Material: Cold rolled low carbon steel strip 4. Characteristic: Good Surface Quality, Uniform coating No coating burr Stable quality Excellent corrosion resistance TORICH QUALITY ASSURANCE 5. Application: Brake tube on automobile 6. Specifications: OD(mm) OD
304 316 304L 316L 430 Stainless Steel Rectangular / Square Tube ASTM A213
ASTM A213 is a standard specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes. The ASTM A213 Stainless Steel Square Tube is made of stainless steel and comes in a square shape. The tube is commonly used in industrial and domestic applications due to its corrosion-resistant properties. Material and Specification The ASTM A213 Stainless Steel Square Tube is made of stainless steel and comes in a range of sizes. The tube is
ASTM A 179 Carbon Steel Heat Exchanger Tubes Extruded Fin Fin Tube 18 Meters Max
Fin Tube Type and Material No. Fin Type Fin Material Tube Material 1 Extruded Fin Fin Tube SB209 - B209 Aluminium Alloy 1050 or 1060 SB75 - B75 Copper SA179 - A179 Carbon Steel SA213 - A213 Stainless Steel SB75 - B75 Copper SB111 - B111 Copper Alloy 2 G Fin Fin Tube / Embeded Fin Tube EN573-3 Aluminium Alloy 1050 or 1060 SB152 - B152 Copper 3 L Fin Fin Tube 4 LL Fin Fin Tube 5 KL Fin Fin Tube Fin Tube Details Tube O.D 8-51mm Wall Thickness Please advice Length Usually 12mtr
