seamless alloy steel pipe
"
DIN 17174 St35 Circular Steel Pipe Seamless Precision Steel Tubes For Low Temperature Service
DIN 17174 TTSt35N TTSt35V 11MnNi53 13MnNi63: Circular Steel Pipe Seamless Precision Steel Tubes for Low Temperature Service Material Specification DIN 17174 is a standard that specifies the requirements for seamless precision steel tubes used in low-temperature applications. These tubes are designed to withstand extreme cold environments, making them ideal for industries such as oil and gas, chemical processing, and cryogenics. The materials covered under this standard
Omega Shape Special Steel Pipe 1010 1020 Plastic Pipe Cap End Protector
Omega Shape Special Steel Pipe 1010 1020 Plastic Pipe Cap End Protector Products Description: Omega Tube Seamless Carbon Steel Special Shape Pipe 1010 1020 special steel pipe Omega tube Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or according to customer's requirement. Outer diameter: Round: 5-420mm Diameter and wall
A 556 / 556M Cold Drawn Carbon Feedwater Heater Seamless Steel Pipe Black
A 556/A 556M Cold-Drawn Carbon Feedwater Heater Seamless steel Tubes 1. Referenced Documents 1.1 ASTM Standards: A 450/A 450M Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes E 30 Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron 2. Manufacture 2.1 ManufactureTubes shall be made by the seamless process and shall be cold drawn. 2.2 Heat Treatment: 2.2.1 Cold-drawn tubes shall be heat
Non Alloy Oval Special Steel Pipe Custom Flat Sided Cold Rolled Steel Tube
TORICH Good OD&ID Tolerance Control Oval Steel Pipes Oval Special Steel Tube are produced with Material: 10#-45# A53-A369, ST35-ST52, Q195, Q235 , Q345 The sizes of Flat sided Oval Special Steel Tube are as follow: Outer Diameter:5-420mm (Diameter and wall thickness could be at customer's request.) Thickness: 0.5-50mm Section Shape: Oval Alloy Or Not: Non-alloy Surface Treatment of Oval Special Steel Tube : According To Customer's Requirement Special Pipes Oval Tube Grade :
Carbon Steel Special Steel Pipe Astm A519 Seamless Cold Drawn Od 15 - 80mm
ASTM A519 15CrMo Seamless Carbon Steel Special Shaped Tubes & Pipes Product Description OD:15mm-80mm WT:1mm-14mm Standard: GB/T8162 , GB/T8163 ,ASTM A519,DIN1629 Steel grade: GB/T8162 , GB/T8163:10#, 20#, 35#, 45#, 16MN(Q345B),15CrMo DIN 162 St 37.0, St 44.0, St 52.0 Process method:cold rolling or cold drawn Surface coating:varnish painted on pipe,anti-corrosion oil,galvanized,or painting as customer's request. 1. Introduction & Application: This kind of tubes is made by good
Hot Rolled 35crmo4 Seamless Carbon Steel Tube / Heavy Wall Steel Pipe Tube
Descriptions of Carbon Welded/Seamless Steel Pipe Product Name Hot Rolled Carbon 35crmo4 Seamless heavy wall Steel Pipe tube Standard ASTM A106, ASTM A53, API 5L Gr.B, DIN17175,DIN1629 Outer Dia: 10mm-1500mm Wall Thickness 2mm-70mm Dia Tolerance Control with in the standard, OD:+-1%, WT:+-10% Materials 10#,20#, 45#,16Mn,A106(B,C),A53(A,B),API J55,API K55,Q235,Q345,ST35.8,ST37,ST42,ST45,ST52 Inspection ISO,BV,SGS,MTC Packing Waterproof paper, and steel strip packed. Standard
Annealed Special Steel Pipe Carbon Seamless Omega Tube For Boiler Use
Products Description: Omega Tube Seamless Carbon Steel Special Shape Pipe 1010 1020 special steel pipe Omega tube Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or according to customer's requirement. Outer diameter: Round: 5-420mm Diameter and wall thickness could be at customer's request. Technology: Cold Draw/Cold Rolled
Astm A519 Special Steel Pipe Seamless Cold Formed Hollow Elliptical Oval Steel Tube
TORICH ASTM A519 Seamless Cold Formed Hollow Elliptical Steel Tube Quick Detail: Material: 10#-45# A53-A369, ST35-ST52, Q195, Q235 , Q345 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: oval Wall thickness: 0.5-50mm Length: up to 12m, or according to customer's requirement. Outer diameter: Round: 5-420mm Diameter and wall thickness could be at customer's request. Technology: Cold Draw/Cold Rolled Surface treatment: painted,galvanized,or oiled according to customer's requirement
Annealed Finned ASTM A213 Ferritic Alloy Steel Tube
ASTM A213 Seamless Ferritic and Austenitic Alloy-Steel Boiler, Super heater, and Heat-Exchanger Tubes Product Description: ASTM A213 standard is a common used specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Super heater, and Heat-Exchanger Tubes, offering manufacture and purchasing requirements for manufactures and users, main information contain grade, size, finishes, test and other terms, the equivalent standard is ASME SA213. Table 1, chemical
