cold drawn tubes
"
DIN 2445-1 ST52 Hot Finished Seamless Steel Tube for Hydraulic Systems
DIN 2445-1 ST30 ST35 ST45 ST52 Hot Finished Seamless Tubing Introduction DIN 2445-1 is a standard that specifies the requirements for hot finished seamless steel tubes used in fluid dynamics systems. These tubes are essential in various applications due to their strength, durability, and resistance to pressure. This article will cover the material specifications, chemical composition, mechanical properties, and applications of ST30, ST35, ST45, and ST52 seamless steel tubes.
DIN 10220 ST37 High Strength Steel Tube Seamless Precision Steel Tubes For General Purpose
DIN 10220 ST37 ST45 ST52 High Strength Steel Tube Seamless Precision Steel Tubes for General Purpose Material DIN 10220 specifies the requirements for seamless precision steel tubes made from high-strength steel grades such as ST37, ST45, and ST52. These tubes are widely used in various engineering applications due to their excellent mechanical properties and versatility. Specification The seamless precision steel tubes conform to the DIN 10220 standard, which outlines the
JIS G7219 TS360 Seamless Pressure Pipe Seamless Steel Tubes For Pressure Purposes
JIS G7219 TS360 TS410 TS430 TS500 Seamless Pressure Pipe: Seamless Steel Tubes for Pressure Purposes Material JIS G7219 specifies the requirements for seamless steel tubes used for pressure purposes. These tubes are designed to withstand high pressure and are commonly used in industries such as oil and gas, petrochemicals, and power generation. The seamless construction ensures uniformity and strength, making them ideal for critical applications. Specification The JIS G7219
KL Fin Tube with Knurled L-Footed Design for High Heat Transfer Efficiency and Corrosion Resistance
KL Fin Tube (KL Type Knurled L-Footed Finned Tube for Heat Exchangers) Material / Product Description KL fin tube (KL type knurled L-footed finned tube) is a wrap-around finned tube where an L-shaped fin strip is helically wound onto a pre-knurled base tube. The knurling and L-foot create a tight mechanical interlock and a large metal-to-metal contact area, improving heat transfer efficiency and fin bond stability compared with standard L or LL fins. Typical base tube
Welded Austenitic Stainless Steel Tube for Tubular Feed Water Heaters
ASTM A688 TP304/304L/304LN , TP316/316L/316LN Welded Austenitic Stainless Steel Feed warter Heater Tubes Size range: O.D.: 4.0-230mm W.T.:1-30mm L: according to customer requirement Material and Manufacture: Tubes are made from Flat-rolled steel by automatic welding process. Subsequent to welding and prior to final heat treatment, the tubes are cold drawn or cold rolled The tubes are ready for U-bending after annealed, according to customer's drawing and design. Surface
GB/T24593 12Cr18Ni9 06Cr18Ni11Ti 304 / 316Welded Stainless Steel Tube OD 3-500mm
Product Name: GB/T24593 12Cr18Ni9 06Cr18Ni11Ti 304/316Welded austenitic boiler and heat-exchanger Stainless Steel Pipes Size range: O.D.:3-500mm W.T.:0.5-50mm L:2000-12000mm according to customers' actual application and production. Application : For boiler and heat-exchanger Steel Grade: 12Cr18Ni9,06Cr19Ni10,022Cr19Ni10,06Cr25Ni20,022Cr22Ni5Mo3N,019Cr19Mo2NbTi,06Cr13Al Characteristic: Good concentricity Good surface quality Good OD and ID tolerance High Precision Stable
GB/T 19793 Small Diameter Thick Wall Welded Pipe / Tube Q235 Q195 SPCC SPHC
GB/T 19793 small diameter Thick-wall welded pipe/tube Q235 Q195 SPCC SPHC Typical fields of application are in: Automobile and motorcycle Shock Absorber Pipe Hydraulic-cylinder Pipe Mechanical steel pipes for auto and motor parts Gas Spring pipe motor casing pipe etc size:length--2~12m WT--2~4.5mm OD--16~50mm material:Q235 Q195 SPCC SPHC Production process: ordinary high-frequency welded pipe Advantages: small diameter and thick wall Surface Quality:The internal and external
Welded Austenitic Stainless Steel Tube Astm A688 For Tubular Feed Water Heaters
ASTM A688 TP304/304L/304LN , TP316/316L/316LN Welded Austenitic Stainless Steel Feed warter Heater Tubes Size range: O.D.: 4.0-230mm W.T.:1-30mm L: according to customer requirement Material and Manufacture: Tubes are made from Flat-rolled steel by automatic welding process. Subsequent to welding and prior to final heat treatment, the tubes are cold drawn or cold rolled The tubes are ready for U-bending after annealed, according to customer's drawing and design. Surface
Non Alloy Seamless Omega Tube
Non Alloy Seamless Special Steel Pipe Omega Tube Material 20G For Boilers from TORICH Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Lemon Wall thickness: 0.5-50mm Length: up to 12m, or according to customer's requirement. Outer diameter: Round: 5-420mm Diameter and wall thickness could be at customer's request. Technology: Cold Draw/Cold Rolled Surface treatment: painted
