carbon steel tube
"
Annealing 304 316 ASTM A213 Stainless Steel Coil Tube
TORICH ASTM A213 304 316 Stainless Steel Cooling Condenser Coil Pipe Products Description Standard:ASTM A213 Material 304 316 317 347h etc Heat treatment: Yes Packagig:In wooden boxes Packagig. Shape: coiled Usage: heat exchangerainess Steel Cooling Coil/Condenser Coil Pipe mless tube heat exchanger stainless steel coil pipe Product Name Stainless Steel Seamless Pipes Material stainless steel /Duplex stainless Technique Cold Drawn/Cold Rolling Size O.D 6-127mm ; W.T: 0.5-12mm
Torich Incoloy 800 Incoloy 800 Tubing Welded Seamless Nickel Alloy Steel Rod,Tube and Pipe EB3552
Torich Incoloy 800 Incoloy 800 Tubing Welded Seamless Nickel Alloy Steel Rod,Tube and Pipe EB3552 Product Name Torich Incoloy 800 Incoloy 800 Tubing Welded Seamless Nickel Alloy Steel Rod,Tube and Pipe EB3552 Technique Hot Rolled or Forged Length Customized Diameter 5-300mm or customized Form Round/Square/Hexagonal Bar Delivery 7-15 days after deposit Incoloy800 Typical values (Weight %): Cr Ni C Si Mn P S Fe 19.0-23.0 30.0-35.0 0.10 1.00 1.50 0.030 0.015 Margin
EN10305-4 E215 E235 E355 High Precision Seamless Hydraulic Cylinder Honed Tube
EN10305-4 E215 E235 E355 High Precision Seamless Hydraulic Cylinder Honed Tube Product Description The saemless hydrualic cylinder honed tube is produced in strict accordance with the European EN10305-4 standard. Carbon steel pipe billets are used as raw materials, treated with imported lubricants from Europe, and manufactured by precision cold drawing. The ENstandard series of high-brightness precision seamless flat oval steel pipes have high dimensional accuracy and bright
UNS N08825 ASTM B163 Standard Nickel Alloy Steel Pipe
ASTM B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat Exchanger Tubes This specification covers seamless tubes of nickel and nickel alloy for use in condenser and heat-exchanger service. This covers outside diameter and average wall, or outside diameter and minimum wall tube. Tube shall be furnished in the alloys and conditions defined by this specification. The material shall conform to the composition limits of nickel, copper, molybdenum,
ASTM B111 C71500 Steel U Tube For Boiler
TORICH ASTM B111 C71500 Copper Nickel Alloy Steel U Tube for Boiler This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 3-1/8" in (80mm) inclusive, in diameter, for use in surface condenser, evaporators, and heat exchangers. The following coppers and copper alloys are apecified. Type: Copper Alloy Steel U Tube Application: For Heat Exchanger, Boiler, and Condenser Technique: Cold Drawn Material: C71500
OD420mm Torich Alloy Steel Pipe For Condenser
Torich GB/T8890 Seamless copper alloy tube for condenser Standard specificition for seamless copper alloy tube for condenser and heat exchanger Standard:GB/T19447/ ASTM B359/ ASME SB 359 Material:BFe10-1-1 , BFe10-1.4-1, BFe30-0.7, BFe30-1-1, HAl77-2, HSn72-1, HSn70-1,etc OD:12-25.4mm WT:1-1.5mm Packing: Wooden case, oil protection, woven bags Referenced standard: GB/T228.1-2010 GB/T241 GB/T242 GB/T246 GB/T5248 GB/T8888 OD:5-420mm WT:0.5-50mm Length:Max12000mmm Application:
C1100 Enhanced Condenser Torich Heat Exchanger Tubes
Torich JIS H3300 C1100 Enhanced Condenser Steel Pipes 1.Scope: This standard specifires the wrought copper and copper alloy seamless pipes and tubes having a round section. 2.Referenced standard: JIS B8265 Construction of pressure vessel --General principles JIS B8266 Alternative standard for comstruction of pressure vessels JIS B8267 Construction of pressure vessel JIS H0321 General rules for inspection of non-ferrous metal material JIS H0500 Glossary of terms uesd in
Hydraulic Cylinder E355 ST52 H8 Honed Tube
Hydraulic Cylinder Tube E355 ST52 H8 Honed Tube Manufacture Method: Cold drawn, hot rolled+deep hole bored Certification: ISO9001, SGS, Material: Carbon steel,alloy steel, stainless steel Standard&Grade: DIN2391-2 ST52,EN10305-1 E355,C45E,25CrMo4,42CrMo4, CK45,E410, E470,ASTM A519 SAE1020,SAE1026,SAE1045,SAE1518,SAE1541, SAE4130,SAE4140,SAE4145,SAE4340,etc. Size Range: ID of 300mm max for cold drawing, ID of 500mm for deep hole boring ID Tolerance: ISO H8 End finish: Plain
High Purity Stainless Steel Seamless Pipe Bright Annealing
AP Pipe, MP Pipe, BA Pipe Electronic Grade High Purity Gases Gas Clean Industrial Tubing AP tube(Annealed&Pickled) MP tube(Mechanical Polished) BA tube(Bright Annealed) All high-purity and clean gas in high-purity gas pipeline BA / EP should be transported to the instrument point (POU) through the pipeline. In order to meet the gas quality requirements of the instrument, when the gas outlet index is fixed, more attention should be paid to the material selection and constructi
