alloy steel tube
"
ASTM A513 4130 Chromoly Cold Drawn Precision Steel Tube for Mechanical Engineering
ASTM A513 4130 Chromoly Cold Drawn Alloy Steel Precision (DOM) Tube / Pipe for Mechanical Engineering Material This product is ASTM A513/A513M Grade 4130 chromiummolybdenum (Chromoly) mechanical tubing manufactured by the ERW Drawn-Over-Mandrel (DOM) cold drawing route. ASTM A513 Type 5 DOM tubing is produced from electric-resistance-welded tube that is subsequently cold drawn over a mandrel to achieve high dimensional accuracy, improved concentricity, and a smooth bore
Black Coating Seamless Steel Tube Hot Rolled Non - Alloy For Gas Transportation
Product Description Non-alloy API 5L Seamless Carbon Steel Pipe Product :Non-alloy API 5L Seamless Carbon Steel Pipe OD 13.72 mm - 914.4 mm WT 1.65 mm - 22 mm Length 0.5 m - 20 m Standard API 5L, ASTM A106/A53, DIN2391, DIN1629, ASTM A179/A192, EN10210, EN10216, EN10208 Material GR.B, X42, X46, X52, S355JOH, S355J2H, St 44.0, P265GH, P235GH, P265TR1 Usage: Chilled Water Pipe, Drinking water Pipe, Waste Water Pipe, Structural Tube, Fluid Pipe, Boiler Pipe, Oil and Gas
Thick Wall Mild Steel Tube Seamless Round Stainless Steel Pipe For Automotive Components
Mild steel tubes are widely used in various industries due to their excellent mechanical properties, durability, and affordability. Three popular mild steel tube grades are AISI 1020, 4130, and 4140. In this article, we will discuss the material, specification, chemical composition, mechanical properties, steel grade, and application of these three grades. AISI 1020 Mild Steel Tube Material AISI 1020 is a low-carbon steel that contains 0.18% carbon and 0.23% manganese. It is
NF A49-341 Standard Precision Welded Pipe Low Alloy Steel Pipe with TS30o and TS30a Grades for Mechanical Applications
NF A49-341 Precision Welded Low-Alloy Steel Pipe (TS30o / TS30a / TS34a / TS7a / TS42a) Material Description This product is a precision welded low-alloy steel pipe manufactured under the French NF A49-341 standard. It is intended for mechanical applications , where dimensional accuracy, weld seam quality, and mechanical strength are essential. Because it is precision welded, the manufacturing process is optimized to produce tight tolerances, minimal defects, and consistent
20mm Bright Annealed Stainless Steel Tubing ASTM A269 TP304/304L , TP316/316L
ASTM A269 TP304/304L , TP316/316L Bright Annealed Seamless and Welded Austenitic Stainless Steel Tube ASTM A269 Seamless and Welded Austenitic Stainless Steel Tubing for General Service Size range: O.D.: 4.0-760mm W.T.:1-50mm L: according to customer requirement Manufacture: The tubes are made by seamless or welded process. The tubeing can be hot finished or cold finished Heat treatment: All tubes are furnished in the heat-treated condition Mechanical Tests Requirement:
Titanium Alloy Steel Pipe GB/T 3624 Low Density For Petrochemical / Automobile
GB/T 3624 Titanium and Titanium Alloy Steel Pipe Material :TA1,TA2,TA3,TA8,TA8-1,TA9,TA9-1,TA10. Characteristic of the material:High strength ,low density,good mechanical property ,good tenacity.good corrosion resistance . Titanium and Titanium Alloy Steel Pipe Size : OD 4-114mm WT0.2-4.5mm Application: Aerospace, petrochemical, shipbuilding, automobile, medicine.etc. Chemical component: Steel Grade Nominal Chemical Composition Chemical Composition/% Main components Impurity
GB/T 30059 Alloy Steel Pipe Incoloy 800 Inconel 600 Seamless For Heat Exchanger
Products Description: Seamless Corrosion-resisting Alloy Tubes GB/T 30059 Incoloy 800 Inconel 600 For Heat-exchanger Steel Grade/Steel Material: Steel Grade ASTM Steel Grade C Cr Ni Fe Mo Cu Al Ti Nb Co Si Mn P S NS1101 N08800 (Incoloy 800) 0.010 19.0-23.0 30.0-35.0 Remainder - 0.75 0.15-0.60 0.15-0.60 - - 1.00 1.50 0.030 0.015 NS1102 N08810 (Incoloy 800H) 0.05-0.10 19.0-23.0 30.0-35.0 Remainder - 0.75 0.15-0.60 0.15-0.60 - - 1.00 1.50 0.030 0.015 NS1103 - 0.030
20mm Bright Annealed Stainless Steel Tube ASTM A269 TP304 / 304L TP316 / 316L
20mm Bright Annealed pipe Stainless Steel Tubing ASTM A269 TP304/304L , TP316/316L Size range: O.D.: 4.0-760mm W.T.:1-50mm L: according to customer requirement Manufacture: The tubes are made by seamless or welded process. The tubeing can be hot finished or cold finished Heat treatment: All tubes are furnished in the heat-treated condition Mechanical Tests Requirement: Flaring Test (Seamless Tubes) Flange Test (Welded Tubes) Hardness Test Hydrastatic or Nondestructive
Cold Rolled Din2391 ST37.4 ST52.4 Seamless Steel Tube
Din2391 ST37.4 ST52.4 Seamless Precision Steel Tube Application Shock absorber,Motorcycle accessories, drill pipe,Excavator accessories,Auto part, hight pressure boiler tube, honed tube,Transmission shaftetc standard ASTM JIS DIN GB Material ASTM A53A,ASTM A53B,ASTM A178C 10#,20#,45#,Q235,Q345,Q195,Q215,Q345C,Q345A ST37,ST37-2,DIN 1629 ST35,DIN 1629 ST45,DIN 17175 ST35.8,DIN 17175 DIN 17175 19Mn5 16Mn,Q345B,T1,T2,T5,T9,T11,T12,T22,T91,T92,P1,P2,P5,P9, P11,P12,P22,P91,P92
