GOST 33229 Grade 20 10 10G2 09G2S Cold Deformed Pipe: Carbon Steel Precision Seamless Pipe for Boiler
Material
GOST 33229 specifies the requirements for cold-deformed precision seamless steel pipes, which are widely used in the manufacturing of boilers and other high-pressure equipment. These pipes are known for their high strength, durability, and resistance to high temperatures and pressures. The grade 20 10 10G2 09G2S is a specific type of carbon steel that is designed to meet these demanding conditions.
Specification
The GOST 33229 standard outlines the dimensions, tolerances, and mechanical properties of the pipes. These pipes are typically manufactured through a cold deformation process, which enhances their mechanical properties and ensures precise dimensions. The standard ensures that the pipes meet the necessary quality and safety requirements for use in boilers and other high-pressure applications.
Key Features
- High Strength: The cold deformation process increases the strength of the pipes, making them suitable for high-pressure applications.
- Precision: The seamless design and precise dimensions ensure a perfect fit in complex assemblies.
- Durability: Resistant to wear and tear, these pipes are designed to last in demanding environments.
- Temperature Resistance: Capable of withstanding high temperatures, making them ideal for boiler applications.
Chemical Composition
The chemical composition of GOST 33229 grade 20 10 10G2 09G2S is crucial for its performance. Below is a table presenting the typical chemical composition:
| Element |
Composition (%) |
| Carbon (C) |
0.17 - 0.24 |
| Silicon (Si) |
0.17 - 0.37 |
| Manganese (Mn) |
0.35 - 0.65 |
| Phosphorus (P) |
≤ 0.035 |
| Sulfur (S) |
≤ 0.035 |
| Chromium (Cr) |
≤ 0.30 |
| Nickel (Ni) |
≤ 0.30 |
| Copper (Cu) |
≤ 0.30 |
Mechanical Properties
The mechanical properties of the pipes are critical for their performance in high-pressure environments. The table below outlines the typical mechanical properties:
| Property |
Value |
| Tensile Strength (MPa) |
410 - 530 |
| Yield Strength (MPa) |
≥ 245 |
| Elongation (%) |
≥ 20 |
| Impact Energy (J) |
≥ 27 (at -20°C) |
Steel Grade
The steel grade 20 10 10G2 09G2S is specifically designed for high-pressure applications, offering a balance of strength, ductility, and resistance to high temperatures. This makes it an ideal choice for boiler manufacturing and other similar applications.
Application
These precision seamless pipes are primarily used in:
- Boilers: Due to their high-temperature and pressure resistance.
- Heat Exchangers: Offering efficient heat transfer capabilities.
- Pressure Vessels: Ensuring safety and reliability under high pressure.
- Chemical Industry: Suitable for transporting aggressive chemicals.
Possible Alternative Grades
While GOST 33229 grade 20 10 10G2 09G2S is a popular choice, there are alternative grades that might be considered depending on specific requirements:
- ASTM A106 Grade B: Known for its high-temperature resistance.
- DIN 17175 St35.8: Offers similar mechanical properties and is widely used in Europe.
- EN 10216-2 P235GH: Suitable for high-temperature applications in the European market.
TORICH Group, an one-stop service provider of raw materials engaged in raw material production, R&D and
trade, has 30+ years of experience in the market, exported to 56 +countries, and won good reputation and
credibility among domestic and foreign customers.
The company's production plant covers an area of over 10,000 square meters, with an annual production
capacity of 50,000 tons of materials and a comprehensive trading and warehousing capacity of 100,000 tons, which can satisfy customers' personalized needs for raw materials in terms of diversity and timeliness.
The group holds shares in more than ten domestic production entities, whose main products include
seamless steel pipes ( carbon steel and stainless steel), welded pipes ( carbon steel and stainless steel), pipe fittings ( carbon steel and stainless steel), titanium (titanium tubes, titanium rods, titanium cakes, titanium plates, etc.), aluminum (aluminum tubes, aluminum rods, aluminum die casting, aluminum casting, CNC machining), and CNC deep processing of metal materials such as tubes, rods, and casting parts.
Over the past 30 years, the company has been gradually developing new technologies and materials to meet
the growing needs of customers and various diversified needs, exporting to more than 56 countries and still
increasing the number of exporting countries, aiming to help customers to solve the demand for raw materials, and to facilitate one-stop purchasing for customers.
Q: Are you trading company or manufacturer ?
A: manufacturer,also can do trading.
Q: How long is your delivery time?
A: Generally speaking,it is 10-15 days if the goods are in stock,or it is 30-40 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? is it free or extra ?
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact with me.
Your message must be between 20-3,000 characters!
