precision steel pipe
"
ASTM A513 1.75 120wall DOM Steel Tube
A513 1.75 120wall dom tubing ASTM A513-5 steel pipes produced by DOM production Method. Quick detail: Standard :DIN 2393 EN10305 ASTM A519 GOST 5005 -82 DIN2394 JIS-G3445 DIN2391 BS6323 GOST8734-75 IS3074 ASTM A513 Material:St37.2 St 44.2 St52.3 etc Delivery condition:NA,No heat treatment Material St37.2 St 44.2 St52.3 etc Production method Welded precision Delivery condition BK,BKW,BKS,GBS,NBK Test DIN 2393 Decription: Straightness 0.5mm/1m Roundness 0.5 OD range:15-200mm
OD254mm 1.4462 Duplex Stainless Steel Seamless Pipe
Torich 1.4462/S31803/2205 Duplex Stainless Steel Seamless Pipe Type: Stainless, seamless Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: Cold Drawn,Cold Rolled Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC
Super duplex stainless steel seamless pipe tube grade EN 1.4410 - X2 Cr Ni MoN 25.7.4 2507
Super duplex stainless steel seamless pipe tube grade EN 1.4410 - X2 Cr Ni MoN 25.7.4 2507 Applications: heat exchangers,chemical.Boiler,etc Technique: Cold worked and hot worked Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Material 200 series: 201, 202 300 series: 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S,309S,2205,2507,2520 400 series: 410, 410S,420, 430, 431, 440A,904L Size range: O.D. 8-530mm W.T. 0.5mm-30mm Length max 12000mm
Heat Exchanger U Tube Stainless Steel Seamless Pipe For Boiler And Heat Exchanger
Heat Exchanger U Tube Stainless Steel Seamless Pipe For Boiler And Heat Exchanger ASTM A213 U-tube seamless stainless steel pipes are precision-manufactured for high-temperature boiler and heat-exchanger applications. Available in a variety of grades (TP304, TP304L, TP316, TP316L, TP321), they combine excellent corrosion resistance, high strength, and thermal stability. Typical sizes range from " to 5" OD (3.2 mm127 mm) with wall thicknesses from 0.4 mm to 12.7 mm. Five
Stainless Steel Integral Low Finned Tube with High Heat Transfer Efficiency and Corrosion Resistance for Industrial Heat Exchangers
Low Fin Tubes Stainless Steel Integral Low Finned Tube for Industrial Heat Exchangers Material This product is an integral low finned tube manufactured from high-quality stainless steel . The fins are formed directly from the parent tube material through a cold-forming process, ensuring metallurgical continuity between the tube and fins. This construction provides excellent corrosion resistance, high structural integrity, and long-term reliability in demanding industrial heat
BS6323-4 Cold Finished Seamless Steel Tubes Grade CFS1 CFS2 CFS3 CFS4 CFS5 42CrMo4
BS6323-4 BK BKW GBK NBK GZF NZF Cold Finished Seamless Steel Tubes Grade CFS1 CFS2 CFS3 CFS4 CFS5 42CrMo4 Standard: BS6323-4 Seamless and Welded steel tubes for automobile,mechanical and general engineering purposes Part 4: Specific requirements for cold finished seamless steel tubes Applications: for Auto industry / for machinery use/mechanical and general engineering purposes Size range: O.D.:6-280mm W.T.:1-30mm L:max12000mm Method of manufacture: The tubes are manufactured
Hot Finished Welded Steel Tubes for Automobile BS6323-2 HFW2 HFW3 HFW4 HFW5
BS6323-2 HFW2 HFW3 HFW4 HFW5 Hot Finished Welded Steel Tubes for Automobile Standard: BS6323-2 Seamless and welded steel tubes for automobile, mechanical and general engineering purposes Part 2: Specific requirements for hot finished welded steel tubes Applications: for Auto industry / for machinery use/mechanical and general engineering purposes Size range: O.D.:6-350mm W.T.:1-30mm L:max12000mm Method of Manufacture: The tubes are manufactured from flat rolled strip with
143 - 187 HB BS 970 805H20 Alloy Steel Tube Cold Drawn with Normalized / Quenched
BS970 805H20 Alloy Steel Tube BS970 Alloy Steel Grade Alloy steels can be supplied with a grain size of 5 to 8 determined in accordance with BS4490 or another method by agreement. Steel supplied to hardenability reqquirements are supplied fine-grained and if coarse grain steel is specifically required, then the hardenaility shall be subject to negotiation. 251A58 251H60 251A60 525H60 525A58 685H57 525A60 704H60 525A61 705H60 685A57 735H51 704A60 805H60 705A60 735A51 735A54
EN10305-4 DOM Steel Tube Seamless Cold Drawn Tubing Plastic Pipe Cap
Products Description: EN10305-4 Seamless Cold Drawn Tubing DOM Steel Pipe for Hydraulic and Pneumatic Power Systems Steel Grade/Steel Material: Chemical composition(cast analysis)a Steel Grade % by mass Name Number C max Si max Mn max P max S max Altot min E215 1.0212 0.10 0.05 0.70 0.025 0.015 0.025 E235 1.0308 0.17 0.35 1.20 0.025 0.015 - E355b 1.0580 0.22 0.55 1.60 0.025 0.015 - a Elements not included in this table (but see footnote b) shall not be intentionally added to
