electric resistance welded pipe
"
ASTM A513 DOM Steel Tube with Precision Structure 1026 High Yield Strength and Controlled Straightness for Hydraulic Cylinders
ASTM A513 DOM 1010 1020 1026 Mechanical Electric Resistance Welded Steel Pipe Product Overview ASTM A513 DOM steel tubing is a precision mechanical tubing product made from electric-resistance-welded carbon steel tube and then cold drawn over a mandrel to improve dimensional accuracy, wall uniformity, surface finish, and mechanical strength. For buyers specifying 1010, 1020, or 1026, ASTM A513 Type 5 is the correct specification to request when the application requires closer
Mechanical Welded Steel Tube Carbon / Alloy Steel With Electric Resistance
ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing O.D 5-420mm W.T 0.5-50mm L MAX12000mm Appliocations For mechinery ,mechanical engineer Stee Grade and Chemical Compositions Steel C Mn P S Si Cr Mo Grade max max max max min 1008 0.10 0.30-0.50 0.035 0.035 1010 0.08-0.13 0.30-0.60 0.035 0.035 1018 0.15-0.20 0.60-0.90 0.035 0.035 1020 0.18-0.23 0.30-0.60 0.035 0.035 1026 0.22-0.28 0.60-0.90 0.035 0.035 1035 0.32-0.38 0.60-0.90 0.035 0.035 1045 0.37-0
ASTM A671 CB60 Electric Fusion Welded Steel Pipe For Atmospheric and Lower Temperatures
ASTM A671 CB60 CB65 CB70 Electric Fusion Welded Steel Pipe For Atmospheric And Lower Temperatures Introduction ASTM A671 is a specification for electric fusion welded steel pipe suitable for atmospheric and lower temperature service. This article provides an overview of ASTM A671 CB60, CB65, and CB70 steel pipes, including their material, specification, key features, chemical composition, mechanical properties, steel grades, applications, and possible alternative grades.
A358/A358M High Temperature Inconel Welded Stainless Steel Tube / Electric Fusion Welded Pipe
ASTM A358/A358M Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service Grade: 316L, 317, 317L, 321, 321H, 348 S32050, N08800. Welding: The joints are full penetration bouble-welded or single-welded Heat treatment: All pipes are with heat treatment condition. Please specify your heat treatment requirement in the enquiry. Permissible VariationsThe dimensions at any point in a length of pipe shall not exceed the following: Outside
GB/T13793 Cutting Chamfer Automotive Tube Q235 Q345 SPCC SPHC
GB/T13793 Cutting Chamfer Automotive Tube Q235 Q345 SPCC SPHC Welded Steel Tube Application:Dashboard, Seat, Anti-collision Beam, Cylinder Shock Absorber, Door (Thermoform Tube) size:L--2~12m OD--10~76mm WT--0.5~4mmmm Manufacture method:The steel pipe shall be made of hot rolled steel strip or cold rolled steel strip by high frequency resistance welding method Delivery State:Steel tube should be welding or heat treatment state delivery Grade:Q235 Q345 SPCC SPHC HC340/590DP
Longitudinal Welded Steel Tube Electric Resistance With Oiled Surface Treatment
Application:Suitable for mechanical, construction and other structural purposes, and the straight seam welded steel pipe with an outer diameter of not more than 711mm, can also be applied to general welded steel pipe for fluid transportationsize: L--4~12m OD--5~711mm WT--0.5~5.5mmGrade:10,20,Q195,Q215,Q213,Q275Manufacture method:The steel pipe shall be made of hot rolled steel strip or cold rolled steel strip by high frequency resistance welding methodDelivery State:Steel
Electric Resistance Welded Drawn Over Mandrel Steel Tubing With Cold Finished
TORICH BS6323-6 Cold Finished Electric Resistance Welded DOM Steel Tube Product Description: Standard: BS6323-6 Size Range: OD: 6-350mm WT: 1-35mm Length: max 12000mm Steel Grade: CEW1a CEW2a CEW3a CEW4a CEW5a Delivery Condition: 1 BK Cold finished(hard) 2 BKW Cold finished(soft) 3 GBK Annealed 4 NBK Normalized 5 GZF Annealed (including de-scaling) 6 NZF Normalized (including de-scaling) Product Pictures: Packing: Characteristic: Good concentricity Good OD and ID tolerance
Electric Resistance Welded Carbon Steel Heat Exchanger Tubes Oiled Surface
Products Description TORICH ASTM A178 Electric-Resistance-Welded carbon steel tubes boiler and heat exchanger tubes Standard ASTM A178/A178M, A450/A450M, E213, E273 Matrial Grade A, Grade B, Grade C Size OD: 12.7-127mm WT: 0.9-9.1mm Length: Customer's Requirement Application For Boiler, Superheater and Heat exchanger Manufacture The steel for Grade D shall be killed Tubes shall be made by electric-resistance-welding Test and Inspection Mechanical Test, Tension Test,
A928 / A928M S32205 Ferritic / Austenitic Duplex Electric Fusion Welded Pipe
A928/A928M Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal Electric-fusion-welded Steel Pipe for corrosive service. Grade: S31200, S31260, S31500, S31803, S32003, S32205, S32304, S32550, S32750, S32900, S32950, S32760, S32520 Manufacture: Welding, the joints are fully penetration double-welded or single-welded Five Classes of pipes are covered : Class 1 - Pipes shall be double welded by processes using filler metal in all
