cold formed steel tube
"
Bright Annealing Seamless E235 Precision Steel Tube
Din 2391 High Pressure Bright Annealing Seamless Precision E235 Steel Tube 1. DIN2391 high precision bright seamless steel pipe Made of Baosteel's high-quality carbon steel material, after precise drawing, non-oxidative bright heat treatment (NBK state), non-destructive testing, the inner hole of the steel pipe is subjected to high-pressure washing and pickling, the inner and outer walls of the steel pipe are treated with anti-rust oil, and both ends are sealed as Dust-proof
GOST 8732-78 Epoxy Coated Seamless Carbon Steel Pipe for Oil and Gas Applications
GOST 8732-78 Seamless Hot Worked Carbon Steel Pipes With Epoxy Coating For Oil And Gas Material Overview These pipes are seamless hot-worked (hot-finished) carbon steel pipes manufactured in accordance with GOST 8732-78, which specifies the dimensional range for general-purpose hot-deformed seamless steel tubes. The base steel is typically non-alloy carbon steel such as grade 20 to GOST 1050, widely used for pressure and fluid service. After hot manufacturing and heat
BS 3059-1 HFS 320 Heat Exchanger Tubes Low Tensile Carbon Steel Tubes For Boiler And Superheater
BS 3059-1 HFS 320 Heat Exchanger Tubes: Low Tensile Carbon Steel Tubes For Boiler And Superheater Introduction BS 3059-1 HFS 320 is a specification for low tensile carbon steel tubes used in heat exchangers, boilers, and superheaters. These tubes are designed to withstand high temperatures and pressure, making them suitable for various industrial applications. This article provides an overview of the material, specification, chemical composition, mechanical properties, and
ASTM A270 Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM A270 Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing What kind of coiled tubing we can produce? aisi 904l stainless steel pipe unit:mm OD 4.76 WT 0.51 0.71 0.89 1.24 OD 6 WT 1 1.5 OD 6.35 WT 0.51 0.71 0.89 1.24 1.65 OD 7.94 WT 0.71 0.89 1.24 1.65 OD 9.53 WT 0.71 0.89 1.24 1.65 OD 10 WT 1 1.5 2 OD 12 WT 1 1.5 OD 12.7 WT 0.71 0.89 1.24 1.65 OD 14 WT 1 1.5 2 OD 15.88 WT 0.71 0.89 1.24 1.65 2.11 OD 16 WT 1 1.5 2 OD 19.05 WT 1 1.24 1.65
ASTM A213 Stainless Steel Small Diameter Tube Bright Annealed
ASTM A213 304 316 Stainless Steel Small Diameter Tube What kind of coiled tubing we can produce? unit:mm OD 4.76 WT 0.51 0.71 0.89 1.24 OD 6 WT 1 1.5 OD 6.35 WT 0.51 0.71 0.89 1.24 1.65 OD 7.94 WT 0.71 0.89 1.24 1.65 OD 9.53 WT 0.71 0.89 1.24 1.65 OD 10 WT 1 1.5 2 OD 12 WT 1 1.5 OD 12.7 WT 0.71 0.89 1.24 1.65 OD 14 WT 1 1.5 2 OD 15.88 WT 0.71 0.89 1.24 1.65 2.11 OD 16 WT 1 1.5 2 OD 19.05 WT 1 1.24 1.65 2.11 OD 25.4 WT 1.24 1.65 2.11 2.54 OD 31.8 WT 1.24 1.65 2.11 2.54 OD 38.1
Length 0.6m Low Carbon Steel Tube Galvanized Bundy Pipe Coils DC01 for Automobile Brake System
DIN EN 10130:2007-02 Cold rolled low carbon steel flat products for cold forming Technical delivery conditions This European Standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of inquiry and order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet. It does
Hydraulic Precision Steel Tube 0.5 - 10mm Thickness 10# - 45# Grade
Hydraulic Precision Steel Tube 0.5 - 10mm Thickness 10# - 45# Grade Chemical Composition Steel grade C max. Si max. Mn max. P max. S max. Altot min. Name Number E215 1.0212 0.10 0.05 0.7 0.025 0.015 0.025 E235 1.0308 0.17 0.35 1.2 0.025 0.015 -- E355 1.0580 0.22 0.55 1.6 0.025 0.015 -- Tolerance Outer Diameter Allowable tolerance special tolerance GB/T3639 DIN2391 OD WT 4mm-20mm 0.10mm 0.08mm 0.05mm 0.05mm 20mm-30mm 0.10mm 0.08mm 0.08mm 0.08mm 31mm-40mm 0.15mm 0
C10200 Cold Drawn Seamless Low Fin Tube for Heat Exchanger
Products Description TORICH C10200 Cold Drawn Seamless Copper Low Fin Tube for Boiler and Heat Exchanger Material C10200, C11000 Etc Size Fin Thickness: 0.1-2mm; Tube OD: 8-55mm; Length: max 12m Fin Pitch Customize Surface Copper Coated End protector Plain End / Beveled End Application Oil&Gas Well Drilling, For Heat Exchanger Test Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test Quick Detail: Low Finned Tubes
Cold Worked Austenitic Stainless Steel Seamless Pipe For Petrochemicals ASTM A312 / ASME SA312
ASTM A312/ASME SA312 Cold Worked Austenitic Stainless Steel Seamless Pipe For Petroleum And Petrochemicals Introduction ASTM A312/ASME SA312 is a specification for cold-worked austenitic stainless steel seamless pipes that are widely used in the petroleum and petrochemical industries. These pipes are designed to withstand high temperatures, corrosive environments, and extreme pressure conditions. This article aims to provide an overview of the material, specification,
