carbon steel tube
"
Torich ERW ASTM A226 Steel Boiler Tube Gr1 Gr2 Gr3 Gr4
Torich ERW ASTM A226 Gr1Gr2 Gr3 Gr4 Gorgings Boiler Steel Tube Pipes ASTM A226/A226M-95 Specification for Electric-Resistance-Welded Carbon Steel Boiler Superheater Tubes for High-Pressure Service 1. Scope 1.1 This specification covers minimum-wall-thickness, electric-resistance-welded, carbon steel, boiler and superheater tubes for high-pressure service. 1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/2 in. to 5 in. [12.7 to 127 mm] in
Non Alloy Seamless Omega Tube
Non Alloy Seamless Special Steel Pipe Omega Tube Material 20G For Boilers from TORICH Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Lemon Wall thickness: 0.5-50mm Length: up to 12m, or according to customer's requirement. Outer diameter: Round: 5-420mm Diameter and wall thickness could be at customer's request. Technology: Cold Draw/Cold Rolled Surface treatment: painted
Nickel Iron Chromium Alloy Seamless Pipe ASTM B407 For Heat Exchanger
Nickel Iron Chromium Alloy Seamless Pipe ASTM B407 For Heat Exchanger TORICH is a Professional Manufacturer of ASTM A511 MT304 Seamless Steel, which is for Nickel-Iron-Chromium Alloy Steel Tubing for General Service We can manacture stainless steel tubes based on the following technical standard: ASTM A213,ASTM A312,ASTM A511,ASTM A269,ASTM A249,ASTM A358 The Stainless Steel Grade can cover the following: ASTM A213 TP304 TP304L TP304H TP310S TP316 TP316L TP316H TP317 TP347
NF A49-341 Standard Precision Welded Pipe Low Alloy Steel Pipe with TS30o and TS30a Grades for Mechanical Applications
NF A49-341 Precision Welded Low-Alloy Steel Pipe (TS30o / TS30a / TS34a / TS7a / TS42a) Material Description This product is a precision welded low-alloy steel pipe manufactured under the French NF A49-341 standard. It is intended for mechanical applications , where dimensional accuracy, weld seam quality, and mechanical strength are essential. Because it is precision welded, the manufacturing process is optimized to produce tight tolerances, minimal defects, and consistent
GB/T3087 Q235 Carbon Seamless Steel Pipe For Low And Medium Pressure Boiler
GB/T3087 Q235 Carbon Seamless Steel Pipe For Low And Medium Pressure Boiler Steel Grade/Steel Material:Q345 Q195 10# 20# Steel pipe standard:GB/T3087 Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Size Range: OD:4-1200mm WT:0.5-200mm Length: 5.8m, 6m, 11.8m, 12m, or as required. Production Processs: RAW MATERIAL INCOMING INSPECTION STORAGE CUTTINGHAMMERING PICKING LUBRICATION
Non Alloy Seamless Special Steel Pipe Omega Tube Material 20G For Boilers
Non Alloy Seamless Special Steel Pipe Omega Tube Material 20G For Boilers Special Steels Seamless Omega Tube, it is made by Carbon and Alloy Steel, produced by extrusion and cold drawn, the Omega Tubes are used in Boilers and Super Heaters etc, for better heating efficiency. Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or
St37.4 Od16mm ASTM A519 Cold Rolled Steel Pipe
ST37.4 HIGH PRECISION COLD ROLLED SEAMLESS CARBON STEEL PIPE OD 16MM TUBING ST37.4 Carbon Seamless Steel Pipe Tube Chemical Composition(%) Mechanical Property C Si Mn S P Cr Ni Cu Mo Yield Strength Tensile Strength ( s ) ( b ) 0.08~0.13 0.15-0.35 0.30~0.60 0.050 0.040 0.20 0.25 0.25 - 205(21) (MPa) 335(35) (MPa) End Shape Beveled end, plain end, vanished, or adding plastic caps to protect the two ends as per customer's requirements Surface Oiled, Galvanized,
ASTM A500 Special Steel Pipe 20-30 mm Diameter , Steel Rectangle Tube 12000mm Length
Standard: ASTM A500 Seamless Carbon Structural Tubing in Rounds and Shapes Applications: for construction of bridges, and buildings, and for agricultural machines, railway constructions. Size range: Square tubes O.D. :20-20 to 500-500mm W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20-30 to 400-600mm W.T.:1-24mm L:max12000mm Chemical Reuirement Element GradeA, b and D Grade C Heat Analysis Product Analysis Heat Analysis Product Analysis Carbon, max 0.26 0.3 0.23 0.27
Thick Wall 304 Stainless Steel Welded Pipe Astm A276 For Petrochemical Industry
Thick wall 304 stainless steel Standard: ASTMA276, A581,A582,GB705,GB/T905 Material: 200 series: 201,202,202Cu,204Cu, 300 series: 301,303/Cu,304/L/H,304Cu,305,309/S,310/S,316/L/H/Ti,321/H,347/H,330, 400 series: 409/L,410,416/F,420/F,430,431,440C,441,444,446, 600 series: 13-8ph,15-5ph,17-4ph,17-7ph(630,631),660A/B/C/D, Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760,2304,LDX2101.LDX2404,LDX4404,904L Application: 1).Heat exahanger tube for petrochemical,chemical and
