carbon steel tube
"
Welded Not Alloy ERW Steel Pipes CA55 For Lower Temperatures
ASTM A671 ERW Steel Pipes CA55 CB60 CB65 for Atmospheric and Lower Temperatures Size range :OD 400mm,WT 6mm. Production method: OD tolerance:5% of the specified outside diameter. Out of Roundness: Difference between major and minor outside diameter 1% Thickness: The minimum wall thickness at any point in the pipe shall not be more than 0.01inch 0.3mm under the specified nominal thickness. Heat treatment: 1. Without heat treatment 2. Stress released 3. Normalizing 4.
Welded ASTM A500 GrA GrB Precision Steel Tubes
Torich ASTM A500 GrA GrB Precision Cold Formed Welded Round Steel Recatngle Brief introduction: Name ASTM A500 Precision Cold Formed Welded Steel Tube Standard ASTM A500 Production method Welded Grade Grade A,B,C,D Section shape Round,rectangle Size of round OD:5-420mm WT:0.5-50mm Length:Max12000mm Size of rectangle OD:20-30to 400-600mm WT:1-24mm Length:Max12000mm Application Construction of bridges, buildings, and for general structural purposes Test Tension test, yield
Bright Precision Phosphating Steel Pipe Black Steel Pipe DIN2391
Black Steel Pipe Good Consistency Black With Bright Precision Phosphating Steel Pipe DIN2391 Material The material used for the black steel pipe with good consistency, black with bright precision phosphating, is DIN2391 steel. Specification The specification of the black steel pipe with good consistency, black with bright precision phosphating, adheres to DIN2391 standards. Chemical Composition The chemical composition of the black steel pipe is as follows: Element Compositio
GB/T 14291 Q235A / Q235B ERW Cold Drawn Welded Steel Pipes For Ore Pulp Transportation
GB/T 14291 Q235A/Q235B ERW Cold Drawn Welded Steel Pipes for Ore Pulp Transportation Material The material used in the GB/T 14291 Q235A/Q235B ERW Cold Drawn Welded Steel Pipes for Ore Pulp Transportation is high-quality Q235A and Q235B steel. Specification The specification of the GB/T 14291 Q235A/Q235B ERW Cold Drawn Welded Steel Pipes for Ore Pulp Transportation is as follows: Property Specification Outer Diameter Any Wall Thickness 2mm - 16mm Length 5.8m, 6m, 12m Chemical
Dn200 Astm 790 2507 WT2.8mm Super Duplex Stainless Steel Pipe
Torich Dn200 Astm 790 2507 / 2205 / 31803 / 32750 Duplex Stainless Steel Pipe Type: Stainless, seamless Grade: SUS304,321,316L,310S Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6. Straightening-Cutting to
OD254mm 1.4462 Duplex Stainless Steel Seamless Pipe
Torich 1.4462/S31803/2205 Duplex Stainless Steel Seamless Pipe Type: Stainless, seamless Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: Cold Drawn,Cold Rolled Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC
GOST 30245 Rectangular Hollow Sections Structural Steel Pipe For Steel Building Structures
Rectangular Hollow Sections GOST 30245Steel bent closed welded square and rectangular section for building Application:for steel Building Structures. Manufacture method:Shaping the round tubular section with longitudinal weld(Automatic high frequency welding) and consequent spellerizing to square or rectangular section. The article sections shall conform to those specified in fingures 1 and 2 Remark: hHeight(width)bwidthtwall thicknessRedge radiusIInertia momentW
YB/T 4202 Bright Large Diameter Thin Wall Straight Seam Welded Steel Pipes For Scaffolding
YB/T 4202 Welded Steel Pipes: Bright Large Diameter Thin Wall Straight Seam Welded Pipe For Scaffolding Material and Specification The YB/T 4202 standard governs the production of welded steel pipes, specifically designed for scaffolding applications. This standard ensures the consistent production of quality pipes suitable for use in construction scaffolding. The pipes manufactured according to YB/T 4202 are characterized by their bright surface, large diameter, and thin
3Cr13 2Cr13 1Cr13 Bearing Precision Steel Tube For Washing Machine Shaft Sleeve
3Cr13 2Cr13 1Cr13 Bearing seamless steel tube Quick info: Material 3Cr13 2Cr13 1Cr13 GCr15 100Cr6 100CrMnSi6-4 100CrMnSi6-6 100CrMo7 OD 4-440mm WT 2-50mm Production Method Seamless+Cold draw or Cold rolled Application Used for washing machine shaft sleeve,Bearing sleeve End Plain Standard ASTM A 295 ASTM A 534 JIS G 4805 DIN 17230 NF A 35-565 NF A 35-565 Detail info: Material Feature of material: 1cr13, 2cr13, 3cr13 belong to martensitic stainless steel, the main difference
