alloy steel seamless tube
"
ASTM B163 Nickel Alloy Stainless Steel Round Tube for Condenser / Heat - Exchanger
ASTM B163 Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes Steel tubes for Heat Exchangers and Condensers Applications: Steel tubes for Heat Exchangers and Condensers "Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement U- Tubes available" "Nickel UNS N02200, Low-carbon Nickel UNS N02201, Nickel-copper alloy UNS N04400 (Monel400,Nicu30Fe), Nickel-chromium-iron alloy UNS N06600 (Inconel600), Nickel-chromium-iron alloy UNS N06601, Nickel
Thick Wall 304 Stainless Steel Welded Pipe Astm A276 For Petrochemical Industry
Thick wall 304 stainless steel Standard: ASTMA276, A581,A582,GB705,GB/T905 Material: 200 series: 201,202,202Cu,204Cu, 300 series: 301,303/Cu,304/L/H,304Cu,305,309/S,310/S,316/L/H/Ti,321/H,347/H,330, 400 series: 409/L,410,416/F,420/F,430,431,440C,441,444,446, 600 series: 13-8ph,15-5ph,17-4ph,17-7ph(630,631),660A/B/C/D, Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760,2304,LDX2101.LDX2404,LDX4404,904L Application: 1).Heat exahanger tube for petrochemical,chemical and
Stainless Steel Structural Tubing , Seamless Hollow Structural Steel Pipe
ASTM A847 Cold Drawn Seamless Low Alloy Square/Rectangular Structural Pipes Size range: O.D.: 6-813mm W.T.:1-12.7mm L: according to customer requirement Steel Grade and Chemical Compositions: Steel Grade and Chemical Compositions C Mn P S Cu 0.24 1.40 A 0.06 0.80B Mechanical Properties: Tensile strength min Mpa 483 Yield strength min Mpa 345 Elongation min % 19A Manufacture: Tubes are made by seamless process. The tubing may be stress relieved or annealed, as is
High Pressure Boiler Steam Superheater Tubes / Alloy Steel Tube ASTM SA213 T5
Large Caliber AStm A213 T5 High Pressure Boiler Alloy Steel Pipe 1. Available Size Range: OD Thickness mm inch mm SCH 88.9~1422 3'~ 56' 2.11~140 SCH10 *If the steel grades and size you are looking for are not listed above, please contact us for further information . 2. Application Power plant; Chemical Fertilizer; Petrochemicals; Offshore Oils; Gas Productions; Refineries and etc. 3. Standards ASTM A106 Standard Specification for Seamless Carbon Steel Pipe for High
GB/T12771 DIN11850 Welded Stainless Steel Pipe 470mm Diameter 68mm 48 Inch
Product Description TORICH GB/T12771 DIN11850 470mm Diameter 68mm 48 Inch Welded Stainless Steel Pipe Outer diameter 5-420mm Thickness 0.5-50mm Length fixed or random Shape Round.square.Rectangle End PE/Plain Ends, BE/Beveled Ends Technique cold drawn Application Chemical industry, Decoration, Building Payment terms L/C T/T (30%DEPOSIT) Package Standard Seaworthy Package Packing Details :Export standard package,bundled or be required. The inner size of container is below:
ASTM B163Stainless Steel Inconel Tube Monel400 , Nicu30Fe Incoloy 825 Tube
ASTM B163 Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes Steel tubes for Heat Exchangers and Condensors Applications: Steel tubes for Heat Exchangers and Condensors Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement U- Tubes available "Nickel UNS N02200, Low-carbon Nickel UNS N02201, Nickel-copper alloy UNS N04400 (Monel400,Nicu30Fe), Nickel-chromium-iron alloy UNS N06600 (Inconel600), Nickel-chromium-iron alloy UNS N06601, Nickel
Elliptical Hollow Structural Steel OD And ID Tolerance Controlled
TORICH Good OD and ID Tolerance Controlled Elliptical Steel Tubes Elliptical Special Steel Tube are produced with Material: 10#-45# A53-A369, ST35-ST52, Q195, Q235 , Q345 The sizes of Flat sided Oval Special Steel Tube are as follow: Outer Diameter:5-420mm (Diameter and wall thickness could be at customer's request.) Thickness: 0.5-50mm Section Shape: Oval Alloy Or Not: Non-alloy Surface Treatment of Oval Special Steel Tube : According To Customer's Requirement Special Pipes
ASTM A268 Ferritic Martensitic Stainless Steel Tube
ASTM A268 20 Meters Max Ferritic and Martensitic Seamless Stainless Steel Tube Name Ferritic and Martensitic Seamless Stainless Steel Tube Standard ASTM A268, ASME SA268 Outer Diameter 6-219mm Thickness 0.5-12.7mm Length 6m or as customers' request Tolerance a) Outer Diameter: +/- 0.2mm b) Thickness: +/- 0.02mm c) Length: +/- 5mm Surface 180G, 240G, 320G Satin / Hairline 400G, 600G Mirror finish Test Squash test, Extended test, Water pressure test, Crystal rot test, Heat
DIN2391 St35 St45 St52 High Precision Automotive Steel Tubes , Seamless Mechanical Tubing
DIN2391 St35 St45 St52 High Precision Mechanical and Automobile cold drawn Seamless Steel Tube Seamless Steel Tubes for Mechanical and Automobile usage for Backbone of Automobile and rear axle tube, manufacturing and processing of precision equipments, instruments and apparatus. Production Standard, Grade, Steel No: DIN2391 St35 St45 St52 ASTM A519 1010, 1020, 1025, 1035, 1045 ASTM A513 1010, 1020, 1025, 1035, 1040 BS6323 CFSCFS3ACFS4-11 EN10305-1 E215E235E355 JIS G 3441
