Stainless Steel Tube

20mm Bright Annealed pipe Stainless Steel Tubing ASTM A269 TP304/304L , TP316/316L Size range: O.D.: 4.0-760mm W.T.:1-50mm L: according to customer requirement Manufacture: The tubes are made by seamless or welded process. The tubeing can be hot finished or cold finished Heat treatment: All tubes are furnished in the heat-treated condition Mechanical Tests Requirement: Flaring Test (Seamless Tubes) Flange Test (Welded Tubes) Hardness Test Hydrastatic or Nondestructive

Polished Welded Stainless Steel Tubing Bright Annealing Surface For Petroleum And Foodstuff Product Overview This polished welded stainless steel tubing is designed for clean fluid transfer lines where corrosion resistance, smooth surface finish, weld integrity, and dimensional consistency are critical. For foodstuff and hygienic service, ASTM A270 is the preferred reference because it covers seamless, welded, and heavily cold-worked welded stainless sanitary tubing with

ASTM A269 201 304 316 Welded Stainless Steel Tube Syringe Needle Tube Product Overview ASTM A269 welded stainless steel capillary tube is a precision small-diameter tube used for syringe needle cannulas, medical device components, dosing tubes, and fine fluid-transfer assemblies. For syringe needle manufacturing, buyers normally focus on dimensional stability, inner-bore cleanliness, weld integrity, corrosion resistance, and consistent mechanical performance after cold

EN 10216-5 Stainless Steel Tube - Cold Rolled Seamless Steel Tubes For Pressure Purposes Material and Specification EN 10216-5 is a European standard that specifies the technical delivery conditions for cold rolled seamless stainless steel tubes for pressure purposes. These tubes are intended for use in high pressure and high-temperature environments, and they offer excellent corrosion resistance and superior mechanical properties. The standard covers various grades of

Boiler Seamless Stainless Steel Tube OD 6-127mm WT 0.5-12mm ISO9001 Approval Boiler seamless stainless steel tubes in OD 6-127 mm and WT 0.5-12 mm are supplied for pressure-bearing heat-transfer service, especially boiler, superheater, condenser, and heat-exchanger tube bundles. The product range matches the typical ASTM A213 scope, which covers seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes, with commonly supplied sizes up to 5 in.

ASTM A269 S316L PVC Coated Stainless Steel Coiled Tubing For Water Supply Product Overview ASTM A269 S316L PVC Coated Stainless Steel Coiled Tubing is a corrosion-resistant, cold-formed austenitic stainless steel tube designed for continuous water supply lines where long coil length, clean internal flow, external abrasion protection, and chloride resistance are required. The core tube is ASTM A269 TP316L / UNS S31603 stainless steel, supplied in heat-treated condition. The

Super Ferrite Stainless Steel Welded Tube AISI443 for Exhaust system Chemical Component Material C Si Mn P S Cr Ni Mo Ti Nb N 409L 0.006 0.25 0.17 0.020 0.001 12.5 - - 0.15 0.20 0.007 429 0.008 1.5 0.30 0.002 0.001 15.0 - - 0.15 0.5 0.010 439 0.009 0.25 0.25 0.02 0.001 17.5 - - 0.15 0.20 0.010 441 0.009 0.25 0.25 0.02 0.001 17.5 - - 0.15 0.45 0.010 436L 0.007 0.47 0.24 0.016 0.003 17.5 0.12 1.09 0.15 0.22 0.013 443 0.009 0.25 0.25 0.02 0.001 20.5 - - 0.25 0.25 0.011 444 0.010

Tubing Stainless Steel‎ Rolled Precision Clean finish 304 316 317 Quick detail Material 304 TP304 310 316 TP316 317 etc Standard DIN EN GOST SAE DIN UNS OD 2-800mm WT 0.5-30mm Surface Picking,polishing,Bright annealing etc Techniques Welded,seamless Application Widely used in petroleum, food stuff, chemical industry, construction, electric power, nuclear, machinery, biotechnology, paper making, shipbilding, boiler fields, or as customer's required Certificate BV,ISO,CE,SGS

Torich 1.4462/S31803/2205 Duplex Stainless Steel Seamless Pipe Type: Stainless, seamless Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: Cold Drawn,Cold Rolled Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC